Search results for 'm10'

Box-1
$279   1 x Shorty E30 Exhaust header ( You mod for RHD )
$595   1 x 215mm Aluminum Flywheel with replaceable heat shield
$998   2 x 45 DCOE Carbs ( Real Genuine Spanish Webers, not fakes )
$169   1 x Dual Carb interconnect Linkage kit ( Less cable )
$59     4 x Air Horn Stack Screen Filters
$92     1 x High Volume Weber Electric Pump ( No Regulator used )
$397   Ignition Upgrade with Distrib and Ignition + Coil and WIres. 
$289   ESTIMATED Shipping..
+$ Insurance for whatever amount you want used for customs 
You let me know value you want on package and insured value
---------
$2878 US + Insurance + Any variation in shipping costs. 

$695 + $172
 1.       J&E Piston Set for e12
                 + Head and Bore or compression ratio, Stroke or rod length combo
               $695  Pistons, Pins, Locs and Rings.
               13.5cc Total + Volume
                For the above:
                S14 2.3 liter crankshaft Check
                M10 2.0 liter rods Check
                Pistons coated on top and on side skirts +$172  Ceramic Top and Permanent Skirt Coat.
                I need these pistons for a street engine 10.5: 1 CR  Check
                Approx 89.5 mm bore Check… They will be for Exactly and 89.5mm Finished bore
               (The previous set I ordered, for a S14 2.3 liter, these pistons have skirts too short for a street engine, I need them to be like the 1.8i pistons 344909  job # 1025190 .) Okay…We can go with a Full Skirt Forging. No difference in price, etc.
 
2.       1x Haltech Sprint 500 Management Package –$1550
3.       1x Mag P/U Bracket $110
4.       1x ITB EFI Throttle Body Kit –$1695
   1 x TPS with Plug and Pins $119
   1x Distrib Plug $45
5.       1x Set Air Horn Extensions –$160
6.       1x Pair RamFlo style filters –$82
7.       1x 2002 Front single tube brace with Torque Brace $238
-------------
$4866 

Christopher Langsten
Vintage Sports & Restoration
3 Robinson Road
Bow, NH 03304
www.VSR1.com
P: 603-228-2888

These are the Components we use here when doing a Custom Exhaust on a customers car.

Shown with Optional Heat Shield Header Gasket

Great Sound and Long Life.
Center Resonator
Rear Muffler with Tip 
Shorty M10 Header  with Gasket and Collector Reducer

This does not include the Piping itself. It is just the components.
You get your local muffler shop to run the piping and install it in the car or you can bring the car to us for that work.

These are the Components we use here when doing a Custom Exhaust on a customers car.

Shown with Optional Heat Shield Header Gasket

Great Sound and Long Life.
Center Resonator
Rear Muffler with Tip 
LONG M10 Header  with Gasket and Collector Reducer

This does not include the Piping itself. It is just the components.
You get your local muffler shop to run the piping and install it in the car or you can bring the car to us for that work.

M10 / M30 Dual Valve Springs for Performance Street and Turbo use Up to 8000 RPM Use
M10 and M30 Engines

Price is for M10 Set. See options below for M30 

Shown with Optional Titanium Retainers. See Below.

2 x Sets JE Pistons + 3 Sets of Rods.
1 x Remake of S14B25 Long Rod
1 x Remake 89.2mm M10
2 x BMW S14B23 144mm Con Rods
1 x BMW S14 149.7mm Con Rods with ARP 625 Custom Age Bolts

Micke,
$149.00            Springset race
$66.70              Chromoly retainers
$82.80              Mech cam tensioner
$149.60            Cometic gasket 92mm 0.066” 
-----------
$448.10
$89 Shipping USPS
------------
$537.10 

$695     Set of JE Forged Turbo Pistons 9.0:1 for Propane with 62cc Chamber and 89.5mm bore
+
$895     Set 144mm PAUTER Forged 4340 Con Rods with ARP2000 Bolts
Will use normal M10 Bearings
$109 for the set or Rods and Mains UnCoated
Add $65 for Coated Rod Bearings..
----------
$1764 US + Shipping + Other options and Add Ons. 

See below for other options, add On's etc. 
$155    Comeitc MLS Head Gasket .051-.070 thickness to compensate for milled head
$163    ARP Head Stud Set
$139    FULL Engine Gasket and Seal Set.

ANY M10 JE Forged Piston Set...N/A or Turbo engine.
Any Bore or Compression Ratio ....Any Stroke or Rod Combo.
Any M10 / S14 Cylinder Head. E12, 121, 1.8i,  E21, 1600, S14

ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations...
4 Cyl JE Custom Forged BMW M10 Piston Set
Set of 4 JE Forged Pistons with Pins Locs and JE ProSeal Rings.
Any Bore or Compression Ratio and Crank / Rod Combination
SPECIFY BORE AND COMPRESSION RATIO AT CHECKOUT
89mm-96mm in .5mm incements
6.5:1 - 13.5:1 Ratios.

New 294 Camshaft + Dual Spring Set + Shipping
$369 + $169 + $79 Shipping = $617 ..

ANY M10 JE Forged Piston Set...N/A or Turbo engine.
Any Bore or Compression Ratio ....Any Stroke or Rod Combo.
S14 Cylinder Head 

ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations...
4 Cyl JE Custom Forged BMW M10 Piston Set
Set of 4 JE Forged Pistons with Pins Locs and JE ProSeal Rings.
Any Bore or Compression Ratio and Crank / Rod Combination
SPECIFY BORE AND COMPRESSION RATIO AT CHECKOUT
89mm-96mm in .5mm incements
6.5:1 - 13.5:1 Ratios.