CP CUSTOM MADE Forged Pistons
-
10 Cylinder CP Custom Forged Piston Set - All Dish Top - with or without valve pockets
SKU: cp-custom-10-dish10 Cylinder CP Custom Forged Piston Set - All Dish Top - with or without valve pockets
Learn More
ALL CP Forged Piston Sets are Supplied complete with Pins Locs and CP ProSeal Rings.
Please note: ALL CP Custom Pistons take 4 weeks to make + 1 week for any coating operations$1,712.50 -
8 Cylinder CP Custom Forged Piston Set - All Dome Top - with or without valve pockets
SKU: cp-custom-8-dome8 Cylinder CP Custom Forged Piston Set - All Dome Top - with or without valve pockets
Learn More
ALL CP Forged Piston Sets are Supplied complete with Pins Locs and CP ProSeal Rings.
Please note: ALL CP Custom Pistons take 4 weeks to make + 1 week for any coating operations$1,390.00 -
8 Cylinder CP Custom Forged Piston Set - All Dish Top - with or without valve pockets
SKU: cp-custom-8-dish8 Cylinder CP Custom Forged Piston Set - All Dish Top - with or without valve pockets
Learn More
ALL CP Forged Piston Sets are Supplied complete with Pins Locs and CP ProSeal Rings.
Please note: ALL CP Custom Pistons take 4 weeks to make + 1 week for any coating operations$1,370.00 -
5 Cylinder CP Custom Forged Piston Set - All Flat Top - with or without valve pockets
SKU: cp-custom-5-flat5 Cylinder CP Custom Forged Piston Set - All Flat Top - with or without valve pockets
Learn More
ALL CP Forged Piston Sets are Supplied complete with Pins Locs and CP ProSeal Rings.
Please note: ALL CP Custom Pistons take 4 weeks to make + 1 week for any coating operations$831.25 -
5 Cylinder CP Custom Forged Piston Set - All Dome Top - with or without valve pockets
SKU: cp-custom-5-dome5 Cylinder CP Custom Forged Piston Set - All Dome Top - with or without valve pockets
Learn More
ALL CP Forged Piston Sets are Supplied complete with Pins Locs and CP ProSeal Rings.
Please note: ALL CP Custom Pistons take 4 weeks to make + 1 week for any coating operations$868.75 -
5 Cylinder CP Custom Forged Piston Set - All Dish Top - with or without valve pockets
SKU: cp-custom-5-dish5 Cylinder CP Custom Forged Piston Set - All Dish Top - with or without valve pockets
Learn More
ALL CP Forged Piston Sets are Supplied complete with Pins Locs and CP ProSeal Rings.
Please note: ALL CP Custom Pistons take 4 weeks to make + 1 week for any coating operations$856.25 -
8 Cylinder CP Custom Forged Piston Set - All Flat Top - with or without valve pockets
SKU: cp-custom-8-flat8 Cylinder CP Custom Forged Piston Set - All Flat Top - with or without valve pockets
Learn More
ALL CP Forged Piston Sets are Supplied complete with Pins Locs and CP ProSeal Rings.
Please note: ALL CP Custom Pistons take 4 weeks to make + 1 week for any coating operations$1,330.00 -
10 Cylinder CP Custom Forged Piston Set - All Dome Top - with or without valve pockets
SKU: cp-custom-10-dome10 Cylinder CP Custom Forged Piston Set - All Dome Top - with or without valve pockets
Learn More
ALL CP Forged Piston Sets are Supplied complete with Pins Locs and CP ProSeal Rings.
Please note: ALL CP Custom Pistons take 4 weeks to make + 1 week for any coating operations$1,737.50 -
10 Cylinder CP Custom Forged Piston Set - All Flat Top - with or without valve pockets
SKU: cp-custom-10-flat10 Cylinder CP Custom Forged Piston Set - All Flat Top - with or without valve pockets
Learn More
ALL CP Forged Piston Sets are Supplied complete with Pins Locs and CP ProSeal Rings.
Please note: ALL CP Custom Pistons take 4 weeks to make + 1 week for any coating operations$1,662.50 -
12 Cylinder CP Custom Forged Piston Set - All Flat Top - with or without valve pockets
SKU: cp-custom-12-flat12 Cylinder CP Custom Forged Piston Set - All Flat Top - with or without valve pockets
Learn More
ALL CP Forged Piston Sets are Supplied complete with Pins Locs and CP ProSeal Rings.
Please note: ALL CP Custom Pistons take 4 weeks to make + 1 week for any coating operations$1,995.00 -
12 Cylinder CP Custom Forged Piston Set - All Dish Top - with or without valve pockets
SKU: cp-custom-12-dish12 Cylinder CP Custom Forged Piston Set - All Dish Top - with or without valve pockets
Learn More
ALL CP Forged Piston Sets are Supplied complete with Pins Locs and CP ProSeal Rings.
Please note: ALL CP Custom Pistons take 4 weeks to make + 1 week for any coating operations$2,055.00 -
BMW N54 Custom CP Piston Set
SKU: CP_Custom_N54Turbo6 Cylinder CP Custom Forged Piston Set -
Learn More
ALL CP Forged Piston Sets are Supplied complete with Pins Locs and CP Ring Set.
Please note: ALL CP Custom Pistons take approx 4 weeks to make + 1 week for any coating operations$1,050.00 -
4 Cylinder CP Custom Forged Piston Set - All Flat Top - with or without valve pockets
SKU: cp-custom-4-flat4 Cylinder CP Custom Forged Piston Set - All Flat Top - with or without valve pockets
Learn More
ALL CP Forged Piston Sets are Supplied complete with Pins Locs and CP ProSeal Rings.
Please note: ALL CP Custom Pistons take 4 weeks to make + 1 week for any coating operations$735.00 -
Gytis LITHUANIA Custom Cosworth YB with 91.32mm bore change
SKU: Gytis_Finland_CosworthYBCustom made piston set for Coswroth YB engine which is used in rallycross supercar.
Learn More
We are already using CP product.
Now pistons size we have is 90.80mm.
We made a service for block and cylinder bore changed and it is 91.32mm.
We need service pistons for new block.
Serial number of the piston set we have is 223661. We need exactly same
4 piston set but bigger size. As i mentioned bore size is 91.32mm.
ALL CP Forged Piston Sets are Supplied complete with Pins Locs and CP ProSeal Rings.
Please note: ALL CP Custom Pistons take 4 weeks to make + 1 week for any coating operations$820.00 -
Mercedes M113K CP Piston and Carrillo Rod Set
SKU: CP_M113K_KitA full set of 8 x M113K CP Pistons and 8 x HD Carrillo Rods and WMC Bolts for your M113K Project.Learn More
For use in Sleeved Block. 97mm Std or 98mm +1mm bores...
X Forgings, Offset Pins, CP Forced induction Rings, Tool Steel Pins, Accumulator and Contact Reduction Grooves + Ceramic Crown Coat + Tuff Skirt Coat.
Note: This is a full featured upgraded Piston set for extreme boost and HP applications and not a base model piston and rod set..
If keeping ALUSIL Bores see add on option below.$4,465.00 -
6 Cylinder CP Custom Forged Piston Set - Juha-Matti Riikonen
SKU: Juha-Matti Riikonen
Learn More6 CP PistonsChange to 86mm bore and deeper valve pockets
Change from DLC Coated pins to 93 series race pins
Otherwise identical..Newer better updated ring set from reference..Those old rings no longer exist. Also bore is different..
$1472.18
$450 1 Week Rush Order
or
$350 2 Week Rush Order.
+ Shipping to you of course...We use DHL and Fed-ExAs with all our International orders UPON REQUEST we will include a set of VERY LOW AMOUNT invoices (12%-15% of the actual value you paid for the part on the invoice.) to save you on customs and duty on your end. NOTE: We do not charge any sales taxes or Duty on this end. That is all with customs on your end when the package arrives.$1,500.00 -
-
Tony in Singapore N20B20 Project
SKU: Tony_N20_SingaporeN20B20 pistons Std Bore x 10.0:1 your cost $735 with PVD Coated Rings
Rods are in stock, N20 rods:
With CARR bolts $1250
$92 ShippingInvoice for whatever amount you want for Customs...
Learn More$2,077.00 -
6 Cylinder CP Custom Forged Piston Set - All Dome Top - with or without valve pockets
SKU: cp-custom-6-dome6 Cylinder CP Custom Forged Piston Set - All Dome Top - with or without valve pockets
Learn More
ALL CP Forged Piston Sets are Supplied complete with Pins Locs and CP ProSeal Rings.
Please note: ALL CP Custom Pistons take 4 weeks to make + 1 week for any coating operations$1,042.50 -
CP Custom SUBARU BRZ / FRS Piston Set
SKU: CP_BRZ_CustomSubaru BRZ
Learn More
all grade B cylinder , 86mm standard bore
"12:1" compression ratio
with Moly sideskirt coating
otherwise same as CP's OTS piston$869.00 -
12 Cylinder CP Custom Forged Piston Set - All Dome Top - with or without valve pockets
SKU: cp-custom-12-dome12 Cylinder CP Custom Forged Piston Set - All Dome Top - with or without valve pockets
Learn More
ALL CP Forged Piston Sets are Supplied complete with Pins Locs and CP ProSeal Rings.
Please note: ALL CP Custom Pistons take 4 weeks to make + 1 week for any coating operations$2,085.00 -
Josh King BMW M50 CP Carrillo and other parts
SKU: JoshKing_M50Standard size main and big end king racing bearings 86mm Athena cut ring head gasket The one cp piston with just one set of rings my others are fine. Supertech valves inlet and exhaust single grove but iconel exhaust plus the 80/84lb double sprung springs with single groove collets and titanium retainers. $298 King RACE Rod and Main Bearing $249 Athena Cooper Ring Gasket $655 Supertech inconel exhaust and black inlets ( Std or +1mm ) + $85 Single Groove Keepers.$85 Set of 48 pieces $689 Double sprung supertech valves with retainers 80# $19.60 Supertech valve stem seals $299.85 Single piston with a pin, locks, pin fit and one cylinder of rings ----------- $2295.45 US + Shipping to be sorted when Boxed and Weighed. Learn More$2,295.45 -
4 Cylinder CP Custom Forged Piston Set - All Dome Top - with or without valve pockets
SKU: cp-custom-4-dome4 Cylinder CP Custom Forged Piston Set - All Dome Top - with or without valve pockets
Learn More
ALL CP Forged Piston Sets are Supplied complete with Pins Locs and CP ProSeal Rings.
Please note: ALL CP Custom Pistons take 4 weeks to make + 1 week for any coating operations$695.00 -
4 Cylinder CP Custom Forged Piston Set - All Dish Top - with or without valve pockets
SKU: cp-custom-4-dish4 Cylinder CP Custom Forged Piston Set - All Dish Top - with or without valve pockets
Learn More
ALL CP Forged Piston Sets are Supplied complete with Pins Locs and CP ProSeal Rings.
Please note: ALL CP Custom Pistons take 4 weeks to make + 1 week for any coating operations$685.00 -
6 Cylinder CP Custom Forged Piston Set - All Flat Top - with or without valve pockets
SKU: cp-custom-6-flat6 Cylinder CP Custom Forged Piston Set - All Flat Top - with or without valve pockets
Learn More
ALL CP Forged Piston Sets are Supplied complete with Pins Locs and CP ProSeal Rings.
Please note: ALL CP Custom Pistons take 4 weeks to make + 1 week for any coating operations$997.50