Be sure and check Current Sales Specials and Garage Sale Items.

Phone: (818)764-1901
Email Us: topend@racetep.com
Follow Us
0 $0.00

You have no items in your shopping cart.

Mercedes Benz

Mercedes Benz


190E 2.3-16 & 2.5-16 "Cosworth"

Mercedes 190E 2.3 16V and other Mercedes Models
With the exception of the 190E 2.3 16V Cosworth Head M102.983 engine ALL Mercedes pistons require sending us a Sample Original Piston and preferably a Stock Con Rod with it. At minimum we must know the exact width of
the small end of the connecting rod along with the Piston Sample. This is because many Mercedes Models are Piston Guided. This means the Rod is held centered on the Crankshaft by the piston and not the crankshaft. This is unique to Mercdes and a few other European auto makers.

 

Combinations of Forged Con Rods and JE Forged 2618 Pistons:
Mercedes M102.983 2.3 16V. Can also be supplied for the 2.5 16V


JE Forged Piston set with Wrist Pin guide Spacers for use with Stock Connecting Rods and 22mm or 24mm Pin Diameter.
Includes 4 Pistons with wrist pins, Piston Guided Pin Spacers, Pin Locs and Ring Set. 95.5mm or 96mm bores
$835 Order Now


Set of Pistons, Pins, Locs and Rings if you want to make your own Spacers.
$735 Order Now
+ options if you want them: See below


Pauter Forged 4340 Con Rods for use with JE Pistons. Stock Length. No Spacers Needed for Piston Guided application
$1095 Order Now

 
JE Forged Piston set with 22mm Pin Diameter AND Pauter Forged 4340 Con Rods. Matched Set. Stock Length.
Includes 4 Forged 4340 Con Rods with ARP2000 Bolts, 4 JE 2618 Forged Pistons with wrist pins, Pin Locs and Ring Set. 95.5mm or 96mm bores
$1735 Order Now
+ options if you want them: See below


JE Forged Piston set with 22mm Pin Diameter AND LONG + .400” Pauter Forged 4340 Con Rods. Matched Set. Long Length.
Includes 4 Forged 4340 Con Rods with ARP2000 Bolts, 4 JE 2618 Forged Pistons with wrist pins, Pin Locs and Ring Set. 95.5mm or 96mm bores
$1765 Order Now
+ options if you want them: See below


Options: Items with * are recommended for Turbo, NOS, and High RPM Normally aspirated Endurance Racing use.

 

*Add $25 per piston for Total-Seal Gapless 2nd rings (Street and mild Race use)
*Add $38 per piston for Total-Seal Gapless Top rings (Endurance Road Race, Extreme Turbo and NOS Use.)
Note: You do EITHER Gapless Top or Gapless 2nd. NOT Both.
*Add $43 per piston for High Heat Ceramic Coated crowns and Moly coated skirts
*Add $15 Per piston for Lightweight or Heavy Duty Wrist Pins
Add $25 Per piston for extreme lightening (Normally aspirated High RPM use only. Not for turbo or NOS)
Add $18 per piston for FSR Forgings. (Limited to certain bore sizes and applications only.)
Add $22 Per piston for Lateral Gas Ports (For Drag Race and High Compression engines, also good for NOS use.)
*Add $8 per piston for Contact Reduction Grooves
Add $6 per piston for Accumulator grooves....
Add $6 Per Piston for Milled Side Relief lightening
Add $4 Per Pistons for Brushed and Milled Dome crown

 

Don't see what you need?  We will build a custom set of pistons for any application.  Just click here to send us a