Be sure and check Current Sales Specials and Garage Sale Items.

Phone: (818)764-1901
Email Us: topend@racetep.com
Follow Us
0 $0.00

You have no items in your shopping cart.

Low Cost T3 and T3-T4 Conversions

Low Cost T3 and T3-T4 Conversions

Starion Conquest Bolt-On T3 and T3/T4 Hybrid Conversions

Everyone with one of these cars knows it has become very difficult to get new Bolt-On Turbocharges these days. Rebuilding stock units is a terrible idea and rarely works out well. The proper parts are just not available to rebuild these old stock units properly which just results in a total waste of money...To address this we have come with a great cost effective option for putting a new High Quality Performance Turbo on your stock or modified Starion / Conquest.

We are not going to use any of the Cheap Chinese Knock Off Turbos that have no Warranty. These are new Garrett or Turbonetics units with full Warranties and everyting needed to bolt them on...

Low Cost T3 and T3-T4 Conversions

  • Stage-1 Package: For stock or mildly modified engines. For use from 200-250 HP and 6-15 psi boost.

    Stage-1 Package: For stock or mildly modified engines. For use from 200-250 HP and 6-15 psi boost.

    SKU: starion_00007

    New T3/T4 journal Bearing Turbo with Internal Wastegate and performance actuator
    Adapter plate to Bolt-On to Stock exhaust Manifiold
    Oil and Water Lines
    High Flow Inlet pipe from Turbo to Mass Air Sensor
    Performance Downpipe to bolt to stock exhaust system with new 02 sensor
    Needed Gaskets and Oil drainback pipe.



    Add $350 for Ball Bearing Turbocharger
    Add $30 for Manifold to Head stud and High Heat Lock Nut set.
    Add $89 for TurboSmart Manual Boost Controller

    $1,695.00

  • Stage-2 Package: For use from 250-400 HP and modified engines

    Stage-2 Package: For use from 250-400 HP and modified engines

    SKU: starion_00008

    Same as above but with a custom sized T3/T4 for higher HP.
    You specify the HP and Boost Level you plan on needed and we will size correctly.
    For use from 250-400 HP and modified engines

     

    Add $350 for a Ball Bearing Upgrade
    Add $30 for Manifold to Head stud and High Heat Lock Nut set.

    Add $89 for TurboSmart Manual Boost Controller

     

    $1,950.00

  • Peter Diffin Starion Turbo Upgrade

    Peter Diffin Starion Turbo Upgrade

    SKU: peter_diffin_starion

     

    Rebuild and Upgrade Customers OEM Starion Turbo
    Upgrade Compressor to 15G and Clip on Turbine Wheel
    Full Rebuild and Balance
    +
    Ex Manifold Stud and Nut Set
    Turbo to Base Gasket
    Turbo outlet Stud / Nuts

    $942.00