Be sure and check Current Sales Specials and Garage Sale Items.

Phone: (818)764-1901
Email Us: topend@racetep.com
Follow Us
0 $0.00

You have no items in your shopping cart.

M42 , M44

M42 , M44

List  Grid 

14 Item(s)

per page
  • 4 Cylinder JE Custom Forged Piston Set - All Flat Top - with or without valve pockets

    4 Cylinder JE Custom Forged Piston Set - All Flat Top - with or without valve pockets

    SKU: je-custom-4-flat

    4 Cylinder JE Custom Forged Piston Set - All Flat Top - with or without valve pockets
    ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings.
    Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations

    Learn More

  • BMW M42/M44 Turbo and Normally Aspirated JE Forged Piston Set.

    BMW M42/M44 Turbo and Normally Aspirated JE Forged Piston Set.

    SKU: M42_M44_Turbo_JE

    4 Cylinder M42 / M44 JE Custom Forged Piston Set - All Compression Ratios

    ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings

    Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations

    Learn More

  • Bailey Rover 620 ti 2l turbo t16 t series

    Bailey Rover 620 ti 2l turbo t16 t series

    SKU: Bailey_Rover

    4 Cylinder JE Custom Forged Piston Set - Remake from 2006 Job for 500HP and NOS

    ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings

    Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations

    Learn More

  • 4 Cylinder JE Custom Forged Piston Set  for Alfa Romeo Dome with Valve Pockets

    4 Cylinder JE Custom Forged Piston Set for Alfa Romeo Dome with Valve Pockets

    SKU: JE_Custom_ALFA

    4 Cylinder JE Custom Forged Piston Set - All Dome Top - with or without valve pockets

    ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings

    Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations

    Learn More

  • BMW M10 Alpina Hemi Dome Custom Set.

    BMW M10 Alpina Hemi Dome Custom Set.

    SKU: M10_AlpinaHemi

    4 Cylinder JE Custom Forged Piston Set -

    ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings

    Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations

    Learn More

  • Subaru EJ205 96mm x 79mm x 8.5

    Subaru EJ205 96mm x 79mm x 8.5

    SKU: Subaru96x79_Custom

    Subaru EJ205 96mm x 79mm x 8.5

    ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings

    Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations

    Learn More

  • BMW S14 Remake for Bernard in Germany

    BMW S14 Remake for Bernard in Germany

    SKU: Bernard_S14_Remake

    PRICE INCLUDES SHIPPING !!!

    Order from 09-2013
    BMW S14 M3 2.3 12:1 N/A 8000 RPM
    94mm x 84mm x 40.2cc head x 1.69mm HG x .89mm + Deck
    PO# Bernard

    From 94mm you need to go to 94.5mm to get a proper ring set…
    There are no proper rings at 94.20 or 94.25mm
    We would want to keep the same material and ring pack style as you have been using to insure long life…

    That is a safe bore size for that block….

    Set of 4 Pistons exactly like the set from 09-13
    94.5mm bore…
    Asymetric FSR with .5mm Pin Offset.

    Total Seal Gapless Top Rings
    Pin Fit for use with the Same Pins
    New Pin Locs
    Lateral Gas Ports

    Tuff Skirt Coat
    Contact Reduction Grooves

    $981.45 + $99 UPS To Germany

    Learn More

  • Conny Lindroos Custom JE Re-Order

    Conny Lindroos Custom JE Re-Order

    SKU: JE_Custom_Conny

    4 Cylinder JE Custom Forged Piston Set - All Dome Top - SHIPPING IS INCLUDED IN THIS PRICE !

    93 Series Pins and Skirt Coatings + Skirt Notch + Extra Ring Set for 81.5mm bore set.1 x 1.2 x 2.8

    Final changes, compress rate 10:1, vr has to be 4 mm wider and 3 mm deeper (my valves are 4 mm bigger than stocks) same skirt notch works very well, New notch dimensions are: Y=51 mm, W=28 mm, X=11 mm.
    90 mm stroke is correct, my new head gasket is compressed to 1.37 mm. 93 series pins is the ones that I want. Master card payment as usually and a low value receipt including shipment? Same shipment as usually.

    I am building a new engine with Darton sleves with 83 mm boore and hoping to get over 1000 hp
    I would like to order four JE pistons for Volvo, size 83 mm. (1948 cm3)
    Bore 83.00mm, Comp height 1.413, forging 83M, Pin dia .905, Pin length 2.250,
    To the exhaust side of the pistons there should be one "hole" for the oil injector. compression rate 10.0:1
    The combustion chamber is 50 cc. 

    My address is:
    Conny Lindroos
    Heinäkuja 1
    21380 Aura Finland
    +358 400828519

    Learn More

  • BMW S14 Custom Piston and Engine parts Package

    BMW S14 Custom Piston and Engine parts Package

    SKU: Diego_S14 Package

    $695 01 Set of JE 11:1 CR pistons in 94mm ( Perfect ) (unless you specify larger bore as measured is 93.40mm)
    $885 01 Set Of Pauter Rods
    $143 01 Cometic HG (thickness? Not sure as the head has 95.41mm height & block height of 277.66 mm )
    I will make the piston correct for use with a .051 Head Gasket…
    $97.20 01 Oil Pan Baffle
    $840 Supertech Kit
    ----------
    $2660.21 US Parts Total
    $40 Shipping and insrance
    ----------
    $2700.21 US

    If you are using an International Credit Card there will be an additional 2.5% Intl CC Fee $67.50
    Intl. PayPal will incur a 3% Intl PayPal fee..$81.00

    Shipped to::
    8378 NW 68 Street Miami, FL 33166.

    Thanks
    Steve

    Learn More

  • JE Custom Cosworth YB Set for Long Rods with Spiralocs

    JE Custom Cosworth YB Set for Long Rods with Spiralocs

    SKU: YB_JonEinar
    JE Custom Cosworth YB Set for Long Rods with Spiralocs New rod measure 136.5mm center - center. New piston needs a compression height of 32mm. I also remove the 0.8mm from compression height since the block is decked. Bore size is 91.00mm. Piston wrist pin is 24mm. Piston needs valve pockets to be 2mm deep. 32mm exhaust valve 36.5mm inlet valve New desired comp ratio should be around 7.5-7.6. Head volume is 42cc and gasket thickness is 1.3mm. Learn More

  • BMW 2.5 litre S14 DTM spec engine

    BMW 2.5 litre S14 DTM spec engine

    SKU: S14DTM_Custom
    My engine has the Motorsport DTM crank @ 87mm stroke that is lighter than the road 2.5 litre unit It has H beam rods @ 144 mm long, piston oil squirters, 8 injector slide throttle, 324 / 308 cams with 13mm lift, 39mm / 32.5mm inlet, exhaust valves. Also the engine revs to 9700 and it runs on 100 octane leaded race fuel. I need a comp ratio of no less than 12.5 to 1 and max 12.8.

    4 Cylinder JE Custom Forged Piston Set - All Dome Top - with or without valve pockets
    ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings.
    Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations

    Learn More

  • 4 Cylinder JE Custom Forged Piston Set - All Dish, FLat or Dome Top - with or without valve pockets

    4 Cylinder JE Custom Forged Piston Set - All Dish, FLat or Dome Top - with or without valve pockets

    SKU: je-custom-4-dome

    4 Cylinder JE Custom Forged Piston Set - All Dome Top - with or without valve pockets

    ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings

    Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations

    Learn More

  • 4 Cylinder JE Custom Forged Piston Set - All Dish Top - with or without valve pockets

    4 Cylinder JE Custom Forged Piston Set - All Dish Top - with or without valve pockets

    SKU: je-custom-4-dish

    4 Cylinder JE Custom Forged Piston Set - All Dish Top - with or without valve pockets
    ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings.
    Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations

    Learn More

  • 4 Cylinder JE Custom Forged Piston Set - Flat Top for customer to mill own dish up to 4mm deep.

    4 Cylinder JE Custom Forged Piston Set - Flat Top for customer to mill own dish up to 4mm deep.

    SKU: Soren_CustomDish

    4 Cylinder JE Custom Forged Piston Set - All Flat Top -

    ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings

    Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations

    Learn More

List  Grid 

14 Item(s)

per page