Search results for 'bmw 2002'

Shown with OPTIONAL Heat Shield Header Gasket. Click box below to add to order

Available with Matte Silver or Dark Grey High Heat Ceramic Coating

This header is Perfect for any M10 in a 2002, E21 or E30.
Any LHD M10 Powered application....Euro 5 Series, etc.

We decided to make this header for the 2002 owners with low ground clearance issues
as well as the E21 and E30 chassis where the longer header is very close to the floor.
We have tested this on quite a few engine combinations and up to 6500 RPM there is no difference
in performance to our Longer 1.5" header.

This header allows you to tuck the exhaust up high for those Pesky Speed Bumps and steep driveways.

Not tested or Confirmed on RHD Euro Cars. We suspect that the #3 tube will need to be modified to clear the steering.
NOT for use on RHD Vehicles until we can either get our hands on a car or a customer willing to give it a go we cannot confrm.

Available with or Without an 02 Bung 
Available with Polished High Heat Ceramic Coating
Shown with OPTIONAL Heat Shield Header Gasket

Not tested or Confirmed on RHD Euro Cars. We suspect that the #3 tube will need to be modified to clear the steering.
NOT for use on RHD Vehicles until we can either get our hands on a car or a customer willing to give it a go we cannot confrm.

BMW 2002 Rear Shock Tower Brace and Battery Relocation kit. Shown with Optional Batter Cut Off Switch...
Complete Kit. Brace, Mounting Hardware, Batter Cable, Lugs, Terminals and Instructions.

Complete Kit with NEW Properly Jetted 45 DCOE Weber Carb with Air Horns .
TEP Exclusive Lynx Ramflo Manifold,
Cable Linkage Kit,
Anti-Vibe mounts,
Manifold to head gaskets 
Brake Booster Fitting

Dims are 16 x 12 x 7

These are the Components we use here when doing a Custom Exhaust on a customers car.

Shown with Optional Heat Shield Header Gasket

Great Sound and Long Life.
Center Resonator
Rear Muffler with Tip 
Shorty M10 Header  with Gasket and Collector Reducer

This does not include the Piping itself. It is just the components.
You get your local muffler shop to run the piping and install it in the car or you can bring the car to us for that work.

These are the Components we use here when doing a Custom Exhaust on a customers car.

Shown with Optional Heat Shield Header Gasket

Great Sound and Long Life.
Center Resonator
Rear Muffler with Tip 
LONG M10 Header  with Gasket and Collector Reducer

This does not include the Piping itself. It is just the components.
You get your local muffler shop to run the piping and install it in the car or you can bring the car to us for that work.