Products
- 8 Cyl Top Fuel Hemi Aluminum Rod 7.106" 1.156 x 1.600 12mm H12AL-1 125ftlbs Made in the U.S.A.
- Vahag BMW M30 Project Order #2. Engine and Suspension parts and ITB Kit Less Injectors.
- Ian Walpole new order x 8 pieces per 84.5mm order from 2017. Weight Matched.
- Rob Dinsdale 2002 restomod
- 84.50mm Piston ring set 1x3.10/1.2x3.50/2.8x3.10mm, High performance.
- Blank Intake valve 30.00x5.48x125mm / SS/ chromed/ no groove/ Dish.
- Titanium retainer for SPR-H1018D / 6.6 mm valve stems/ Use with KPR-6.6/LS(SET OF 8)
- 87mm Piston ring set 1.2x2.7/1.2x3.10/ 2.0x 2.50mm / Gas Nitrided/ SET OF 4
- Blank Intake valve 37.00x5.962x125mm / SS/ chromed/ no groove/ Dish
- Ford Modular V8 5.4lt DOHC Intake valve 1.460x0.274x5.370"/Undercut/ Single Groove/Tip 0.693" to center /SS 21-4N/ Blk. Nitrided/Backcut.
- Titanium retainer 5.5mm stem- 6 degrees- Spring M1007BE - Nissan RB25 NEO (ST OF 24)
- XC3534 / 89.75 mm Piston ring set 1x3.30/1.2x3.70/2.8x3.30mm, High performance.
- T-shirt Size Large
- 94.50mm piston rings SET OF 8 / 1.2 x 2.90 / 1.2- x 3.40 / 2.00 x 2.80mm / Gas nitrided
- Cam Follower 26.50mm /19mm /3.0+
- Nissan RB26 factory shim replacement Diam 12.15mm - thickness 3.225mm
- Inner Spring seat locator for SPR-TS1015 (SET OF 12)
- F034 Seat inserts- Exhaust / OD:33.60mm / Height: 7.80mm/ Tapered ID: 26.82-26mm/ CuBe3 alloy.
- Audi-VW 2.0TFSI Valve spring / OD 24mm-ID: 16.5mm CB: 24.9 mm (SET OF 24)
- Nissan RB26DET Intake Valve 34.65 (std) x 5.97 x 103.80mm / SS/ Blk. Nitrided/ / Tip 1.5mm longer SET OF 12)
- Beehive spring/ Bottom OD: 26.4mm/ Upper ID: 16mm/ FL: 50.7mm/ CB: 23mm/ 83lbs @ 39.3mm- 167mm @ 11mm lift- Max Lift: 11.4mm (SET OF 24)
- Renault R5 Turbo 2 Intake valve / 38.8 x 7.98 x 104.65mm/ SS EV8/ Chrome coating
- Retainer Audi 2.0T FSI- For spring SPR-A2416-BE2 Beehive (SET OF 24)
- 73.5mm Piston ring set of 4 / 1.5x2.7/1.5x3.10/3.0 x 3.05mm / Gas nitrided
- BMW Dual Valve spring Kit: 67lbs @ 35.70mm (16)SPR-H100DR/BM(16)+RET-K20A/T2+(16)SEAT-BM50
- 78.25mm Piston ring set 1.2x 2.85/1.5x3.20/2.8x2.60mm - Set of 4.
- 81.50mm Piston ring set 1x2.90/1x3.20/2x2.40mm, High Performance / Gas Nitrided
- 86.00 mm Piston ring set 1x3.10/1.2x3.50/2.0x2.80mm, High performance, Gas Nitrided
- Blank Exhaust valve 31.00x 5.98 x 125mm / INCONEL/ chromed/ no groove/ Dish
- 88.00mm piston ring set of 4 / 1.50mm x 1.50mm x 3.0mm.
- BMW S14 Exhaust valve 31.5(-0.5) x 6.95 x 125.00mm/Tip 12.5mm/ Inconel / triple groove/ flat/swirl polish.
- Ford Modular V8 4.6L 3v SOHC Intake valve 34(std) x5.98x119mm/Undercut/12ยบ/SS/ Blk. Nitrided/Triple groove/Backcut / Tip 1.7mm longer
- High Boost Cooper Ring Gasket Subaru EJ257 / 103.5mm / 1.2mm (0.047") thick - One Side (any side).
- Spring seat locator for BMW S54 / SPR-HM1007BE / 2mm thick (SET OF 240
- Spring seat locator for Dual spring SPR-H1018D. Small ID .444" (11.2mm) (SET OF 16)
- SR20 Int seat insert OD: 35.6mm / ID: 29mm/ thickness 7.3mm - AMPCO 45 Nickel Aluminum Bonze
- Toyota Valve stem seal 5.5mm. Viton.
- Titanium retainer for Peugeot 206-EW10J45 / 6.0 mm valve stems/ 7 Degree.
- Cosworth YB Exhaust valve 32.15mm (+1) x 6.95 (-1)mm x 106.70mm / Tip 3mm/ Inconel/ Chrome coating /Dish face/ Swirl polish..
- Zip Up Jacket Heather Navi XLARGE
- Ferrari F1 V12 engine Intake valve 29 x 5.97 x 113.3 / Titanium / CrN coated
- 76.00mm Piston ring set of 4 / 1x2.65/1.2x3.0/2.8 x 2.55mm
- Mini R56 Exhaust guide for 5.5mm valve stem
- 80mm piston ring set of 4 / 1.2mm x 1.2mm x 2.50mm.
- Blank Intake valve 29.00 x5.48x125mm / SS/ chromed/ no groove/ Dish
- Titanium retainer for SPR-H1000 / 6.6 mm valve stems/ Use with KPR-6.6/LS(SET OF 16)
- 87mm Piston ring set 1.5x3.30/1.5x3.80/4x3.05mm / Gas Nitrided/Set of 4
- Blank Intake valve 36.00x5.962x125mm / SS/ chromed/ no groove/ Dish
- Ford Modular V8 4.6 SOHC Exhaust valve 35.90x6.96x118.20mm /SS/Triple groove/Backcut.
- 89.50mm Piston ring set 1.50 x 3.10/ 1.50 x 3.90 / 2.8 x 3.15mm, High performance. Gas Nitrided