Products
- Top ring 81.50mm. Thickness 1.20mm x 3.10mm. Gas Nitrided.
- 86mm Rings set - 1.2mm/1.2mm/ 1.5mm
- Blank Exhaust valve 32.00x 5.98 x 125mm / INCONEL/ chromed/ no groove/ Dish
- Toyota 3SGTE Intake and Exh. guide- 44.5mm x 5.98mm x 11.066mm - Manganese Bronze (SET OF 8)
- 88.25mm piston ring set of 4 / 1.20 x 3.45/ 1.50 x 3.90 / 3.00 x 2.90mm
- Ford Modular V8 4.6L 3v SOHC Exhaust valve 37.5 (std) x5.96x116.45mm/Undercut /25ยบ/SS/ Blk. Nitrided/Triple groove/ Tip .380"
- 92.50 mm Piston ring set , High performance / 1x3.40/1.2x4.00/2.8x3.15mm
- Titanium retainer for SPR-TS1015/ 7 degree (SET OF 24)
- Inner Spring seat locator for SPR-TS1015 (SET OF 16)
- Spring seat locator for Dual spring SPR-H1018D. Small ID .444" (11.2mm)(SET OF 24)
- 4G63 Int seat insert OD: 35.6mm / ID: 28.6mm/ thickness 8.10mm - AMPCO 45 Nickel Aluminum Bonze
- Titanium retainer for Peugeot 206-EW10J45 / Dual Spring/ 6.0 mm valve stems/ 7 Degree.
- Single valve spring Diam 26.6/19.6mm - CB: 20.7mm (0.815") (SET OF 12)
- Yamaha YXZ1000R Exhaust valve 26x4.45x88.85mm / Tip 2.65/ SS EV16 / Chrome coating /Std. size
- Mitsubishi EVO X / 4B11T- For Bore 86.07mm (std). Piston is 86.00mm / 4032/ Forged piston/ 33.3 (std) Comp. height/ - 4.6cc Dish/23mm pin/ Rings 1x3.10, 1.2x3.5, 2.8x3.10mm. / Offset pin/ CR 9:1 (std)...Tool steel wrist pin
- Zip Up Jacket Heather Navi XXLarge
- Spring seat locator for Dual spring SPR-H1018D. Small ID .444" (11.2mm)
- Audi-VW 2.0TFSI Behive Valve Spring Kit / 73lbs @ 37.4mm -/ 173 @ 10lbs/mm - Rate:9.8lbs/mm - CB: 23.5 mm- SPR-A2416-BE1 (16) +RET-A2416-BE2 (16)
- Lash Cap 6mm dia / 1.25mm thick/2.8mm deep
- Subaru 2.0/2.5lts/WRX Intake valve 38x5.96x104.35mm/SS/Black Nitrided/backcut/ +2mm
- 76.00mm Piston ring set 1x2.70/1x3.0/ 2 x 2.40mm, High Performance / Gas nitrided
- Mini R56 Intake guide for 5.5mm valve stem
- 80.00mm piston ring 1.2mm/ 1.2mm / 3.0mm - Set of 4
- Blank Exhaust valve 30.00x5.45x125mm / INCONEL/ chromed/ no groove
- Titanium retainer for SPR-H1000 / 6.6 mm valve stems/ Use with KPR-6.6/LS(SET OF 8)
- 87mm Piston ring set of 4 - 1.5 / 1.5 / 3.0mm
- Blank Exhaust valve 36.00x 5.955 x 125mm / INCONEL/ chromed/ no groove
- Ford Modular V8 4.6 DOHC Intake valve 37x6.98x135.50mm/Undercut/SS/ Blk. Nitrided/Backcut/ RAISED TRIPLE GROOVE POSITION/ Tip 0.492"
- Titanium retainer for Mini R53 / Spring HM1007BE / 6 degree(SET OF 16
- 89.50mm piston ring set of 4/ 1.2 x 2.90mm, 1.2 x 3.80mm, 2.0 x 2.25mm.
- Nissan VG30D Beehive Valve Spring Kit: 75@34.2mm. (16) SPR-TS1012-BE+ (24) RET-NVG1015-75BE (24)
- 94.50mm piston rings set of 6 / 1.2 x 2.90 / 1.50 x 3.40 / 2.50 x 2.50mm / Gas nitrided
- Mini Cooper 1.6 R56 Exhaust valve 27 (+0.8) x 5.45mm stem x 110.15mm / Inconel / Dish/ Single groove / Tapered Tip 5.80mm long /Use w/ keeper KPR-5.0/7S
- Toyta Supra B58B30 Exhaust valve 29.5 (+1) x 5.95 x 100.1mm / Inconel / Dish/ Single groove / Hollow Sodium Filled / Use with keeper KPR-6S/7
- Toyota G16E-GR Beehive Single Spring Diam. 26.3-20.8mm / 20.8- 13mm C.B. 28.5mm/ 90lbs @ 42.6mm/ Rate 8.4 lbs/mm / Chrome Silicon Vanad / Max Lift 12mm for endurance racing + Exhaust base SS-2618-2.3
- B/H Dual Spring seat locator (SET OF 8)
- Cam follower Diam 31mm x 24.7mm x 19.30mm thick (post) / For Lash Cap 6mm on post/ Nissan VG30 - RB20-RB25-CA18...
- Toyota 2ZZ Exhaust Valve 29 x 5.46 x 111.65 mm/ INCONEL.(SET OF 8)
- Spring seat locator for SPR-TS1015 / MC. Use on top of the factory Oil seal/spring locator. 5.9mm thick (to be used with "some" OEM seals with a low step apro 4.35mm high)(SET OF 16)
- Titanium retainer Ford XR6 - Installs 39.4mm (+1.8mm than OEM)- Use with KPR-6T-ST.
- F034 Seat inserts- Exhaust / OD:33.1mm / Height: 7.50mm/ Tapered ID: 26.79-26mm/ CuBe3 alloy.
- Cam Follower 34mm x 26 x 6.5+ Shim 8mm diam.
- S2000 F20C/ K20 Exhaust Valve 31 x6.54x108.8mm / INCONEL. (SRT OF 8)
- Nissan RB26 Exhaust Valve 30.15x6.94x102.7mm /Inconel / +1mm/ 1.5mm Longer Tip ( SET OF 12)
- Chrome Moly wrist pin 18 x 10 x 45.3mm
- Audi-VW 2.0TFSI Valve spring / OD 24mm-ID: 16.5mm CB: 24.9 mm 9SET OF 20)
- Ford Modular 4.6L Beehive Single spring OD 1.075"/.957"- 96lbs@1.417"/ Rate 348lbs/in - CB: .866" (to be used with OEM retainer) (SET OF 32)
- Yamaha Raptor 250 Intake valve 35mm (+1) x 5.98 x 93.7/ SS Black Nitrided.
- Dual Spring diam 27.20/20/15.20mm, CB:20mm Chrome Silicon Vanadium (SET OF 8)
- Retainer Audi 2.0T FSI- For spring SPR-A2416-BE2 Beehive (SET OF 20)