M10

BMW E21 Turbo engine project...
$895   JE Forged Pistons  90mm x 9.5:1 for TURBO 300-350 HP use
$599   144mm matching Forged Con Rods with ARP Bolts.

See below for the other items we discussed and check what you want to order...
We will sort out the other pieces like Camshaft, Valve Guides, Timing Components, etc.as we go along

Rudy,
This is a Deposit Only so we can get Pistons ordered, Rods Shipped, etc.
I can edit this as needed and add a running tally for easy payment and keeping track of your order....

$735   Piston Set 90mm (+0.40) with E12 head with 11:1 compression ratio
$499   Rod Set 144mm with ARP2000 Bolts
Bearings ?
ARP ?
Rockers ?
Camshaft ?
Valve Springs to Match Camshaft ? 
Shipping, etc. 

6 Cylinder JE Custom Forged Piston Set - All Flat or Dish Top - with or without valve pockets
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations

Custom L24 Flat Top Piston Set complete per your Spec sheet sent via email...

Piston Set: 89.5mm + E21 Head + 9.5:1
$169  Cam Regrind
$76    O/S Eccentrics
$279  Shorty M10 header

Pistons, Pins, Locs, Rings, Tuff Skirt Coat and Pauter Forged 4340 Billet Rods with ARP2000 Bolts. Piston guided like OEM

8-10 week lead time....

Deposit Only to get Pistons and Rods underway with the balance and shipping when ready to ship.
$875     JE 9.8:1 x 87mm Piston Set
$1250   Pauter Lightweight 4340 Con Rod Set with ARP2000 Bolts
$139     Big Bore Head Gasket
$128     Rod and Main Bearings
$154     ARP Head Studs
$160     44 x 35 Performance Valves
$179     Turbo Oil Pump
Other items to be considered and added as needed...
Re-Grind your camshaft.
Complete Timing Chain and Gear Set
Full Engine gasket and seal set
Valve Springs / Retainers

$1050     Piston set at 8.5 or 8.8:1 is ideal...8.0 is a bit low...
               I recommend you do Skirt Coating, Contact Reduction and Accumulator grooves...
               See below for options and other pieces...
$699       Forged 4340 133mm Rods with ARP2000 Bolts.

$169       ARP head Studs 
$179       Cometic 87mm Bore 1.2mm Head gasket
$119       Turbo oil Pump

8 x INCONEL Exhaust
8 x SS Intakes
16 x Guides
32 x Keepers
1 x Complete Spring and Ti retainer set

$1250

$995 JE Forged Piston set with Pins, Locs and Rings
$179 Regrind your Camshaft
$169 ARP Head studs
$64 ARP Rod Bolts
$12 Freeze Plug Set
$129 Rod and Main Bearing set Std or .25
$229 Dual Spring Set with Moly Retainers
$250 12 Pieces OEM Nissan Rockers. NOT the Chines Crap being sold online that pop off above 5500 RPM
$109 12 Piece Lash Pads kit to suit cam grind
-----------
$2136 + Shipping

$995 JE Forged Piston set with Pins, Locs and Rings
$179 Regrind your Camshaft
$169 ARP Head studs
$64 ARP Rod Bolts
$12 Freeze Plug Set
$129 Rod and Main Bearing set Std or .25
$229 Dual Spring Set with Moly Retainers
$250 12 Pieces OEM Nissan Rockers. NOT the Chines Crap being sold online that pop off above 5500 RPM
$109 12 Piece Lash Pads kit to suit cam grind
-----------
$2136 + Shipping

2 x Sets JE Pistons + 3 Sets of Rods.
1 x Remake of S14B25 Long Rod
1 x Remake 89.2mm M10
2 x BMW S14B23 144mm Con Rods
1 x BMW S14 149.7mm Con Rods with ARP 625 Custom Age Bolts

Pistons:
Basic set with all your Requested Options and Gapless Top Ring Set
$1209
With Buttons add $80   I would prefer buttons.. Add the buttons in J
So still the exact same price as the $2015 Quote… That’s pretty impressive that the price has remained the same so long!

Rods
$195 Per Rod. Thanks, Please put 8 of these on the order.

Bearings:
$60 Per Set of 4 rods to Drill them here…
ACL 4B8036H-STD Bearings are $53.20 per 4 Cyl Rod Set This is a pretty comparable price to what I would pay here so I think it would be best for me to included these in this order. Please include 2x drilled sets
-------------
$3075.40 US + Shipping TBD after packing.

6 Cylinder JE Custom Forged Piston Set - High Compression Domed Pistons with Valve Pockets. SEE OTHER LISTINGS FOR DISHED OR FLAT TOP PISTONS.
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons have a lead time of 8-9 weeks

6 Cylinder JE Custom Forged Piston Set - All Flat or Dish Top - with or without valve pockets
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 7-8 weeks to make + 1 week for any coating operations