Business Hours: Mon-Fri. 9:30am - 4:30pm Pacific Time Closed from 1:00-2:00 for Lunch. PHONE HOURS: 10:00am - 3:00pm Pacific Time M-F email us at topendmail@gmail.com Call us at 1 818 764-1901 ------------------------------------------------------
BMW E21 Turbo engine project... $895 JE Forged Pistons 90mm x 9.5:1 for TURBO 300-350 HP use $599 144mm matching Forged Con Rods with ARP Bolts.
See below for the other items we discussed and check what you want to order... We will sort out the other pieces like Camshaft, Valve Guides, Timing Components, etc.as we go along
Exact same 94mm x .945 x Flat Top No VR's with Support Rails and Total-Seal Gapless Rings... Identical to the sets made for Krewen and Jens. $789.45 Delivered in the Lower 48 States
Rudy, This is a Deposit Only so we can get Pistons ordered, Rods Shipped, etc. I can edit this as needed and add a running tally for easy payment and keeping track of your order....
$735 Piston Set 90mm (+0.40) with E12 head with 11:1 compression ratio $499 Rod Set 144mm with ARP2000 Bolts Bearings ? ARP ? Rockers ? Camshaft ? Valve Springs to Match Camshaft ? Shipping, etc.
4 Cylinder M42 / M44 JE Custom Forged Piston Set - All High Compression 11:1 + Ratios ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations
6 Cylinder JE Custom Forged Piston Set - All Flat or Dish Top - with or without valve pockets ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations
ANY M10 JE Forged Piston Set...N/A or Turbo engine. Any Bore or Compression Ratio ....Any Stroke or Rod Combo. S14 Cylinder Head
ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations... 4 Cyl JE Custom Forged BMW M10 Piston Set Set of 4 JE Forged Pistons with Pins Locs and JE ProSeal Rings. Any Bore or Compression Ratio and Crank / Rod Combination SPECIFY BORE AND COMPRESSION RATIO AT CHECKOUT 89mm-96mm in .5mm incements 6.5:1 - 13.5:1 Ratios.
8 Intake valves with part number in Supertech: VWIVN-1019 $23.40 each = $187.20 1 kit (8v) DUAL valve SPRINGS ONLY with part number in Supertech: SPRK-V2091/4 $106.80
10 units Lash Cap 7.0 mm/5.50 mm deep/thickness, LC-70-5.50 compatible with cam followers cf-35/14.7 LC $6.70 ea = $67.00 3 units 110 GPH BLUE ELECTRIC FUEL PUMP WITH REGULATOR PART# 12-802-1 $169 each = $507 1 Gauge sending 75-10 ohms with Summit part number: CIN-SN39T9 $89 1 TT LIGHTWEIGHT ADJUSTABLE CAM SPROCKET (8v | 75-99) BLUE (44 gear Teeth) $149 TT LIGHTWEIGHT INTERMEDIATE | CAMSHAFT SPROCKET 8V 1975-1999 $94.99 ------------- $1200.99 US Parts Total Shipping to be finalized after weighing and packing.
I am ESTIMATING and I have added $96 US For shipping....If it is +/- we will adjust with a Credit or additional charge... ------------- $1296.99 US with Shipping Estimate
ANY S14 JE Forged Piston Set...N/A or Turbo engine. Any Bore or Compression Ratio ....Any Stroke or Rod Combo.
ALL JE Custom Pistons take 3-3.5 weeks to make + 1 week for any coating operations... 4 Cyl JE Custom Forged BMW M10 Piston Set Set of 4 JE Forged Pistons with Pins Locs and JE ProSeal Rings. Any Bore or Compression Ratio and Crank / Rod Combination SPECIFY BORE AND COMPRESSION RATIO AT CHECKOUT 89mm-96mm in .5mm incements 6.5:1 - 13.5:1 Ratios.
Set of 4 Turbo M42's with HD 93 Series Pins, Tuff Skirt Coat, JE Rings and Turbo Forgings $1115 US + Shipping...( Likely in the $60-$70 range ) Low Value customs docs upon request.
4 CYL JE CUSTOM FORGED BMW M10 PISTON SET
Bore, Stroke, Crank, Rods, Compression, Etc. All engine details we need to know.
90mm x 10.5 x E12
Custom JE Options
Add $80 for Under Crown Lightening, Add $12 Per Piston for Contact Reduction and Accumulator Grooves Learn More
Deposit Only to get Pistons and Rods underway with the balance and shipping when ready to ship. $875 JE 9.8:1 x 87mm Piston Set $1250 Pauter Lightweight 4340 Con Rod Set with ARP2000 Bolts $139 Big Bore Head Gasket $128 Rod and Main Bearings $154 ARP Head Studs $160 44 x 35 Performance Valves $179 Turbo Oil Pump Other items to be considered and added as needed... Re-Grind your camshaft. Complete Timing Chain and Gear Set Full Engine gasket and seal set Valve Springs / Retainers
$1050 Piston set at 8.5 or 8.8:1 is ideal...8.0 is a bit low... I recommend you do Skirt Coating, Contact Reduction and Accumulator grooves... See below for options and other pieces... $699 Forged 4340 133mm Rods with ARP2000 Bolts.
$169 ARP head Studs $179 Cometic 87mm Bore 1.2mm Head gasket $119 Turbo oil Pump
$995 JE Forged Piston set with Pins, Locs and Rings $179 Regrind your Camshaft $169 ARP Head studs $64 ARP Rod Bolts $12 Freeze Plug Set $129 Rod and Main Bearing set Std or .25 $229 Dual Spring Set with Moly Retainers $250 12 Pieces OEM Nissan Rockers. NOT the Chines Crap being sold online that pop off above 5500 RPM $109 12 Piece Lash Pads kit to suit cam grind ----------- $2136 + Shipping
$995 JE Forged Piston set with Pins, Locs and Rings $179 Regrind your Camshaft $169 ARP Head studs $64 ARP Rod Bolts $12 Freeze Plug Set $129 Rod and Main Bearing set Std or .25 $229 Dual Spring Set with Moly Retainers $250 12 Pieces OEM Nissan Rockers. NOT the Chines Crap being sold online that pop off above 5500 RPM $109 12 Piece Lash Pads kit to suit cam grind ----------- $2136 + Shipping
M10 Stock or very mild engine Street Use 4032 Forging Low Expansion Tight Clearance. 3 Week Delivery Time Set of 4 JE Forged Pistons with Pins Locs and JE ProSeal Rings. Any Bore or Compression Ratio and Crank / Rod Combination SPECIFY BORE AND COMPRESSION RATIO AT CHECKOUT 89mm-96mm in .5mm incements 8:1-10.5:1
