Search results for 'e21'

Shown with OPTIONAL Heat Shield Header Gasket. Click box below to add to order

Available with Matte Silver or Dark Grey High Heat Ceramic Coating

This header is Perfect for any M10 in a 2002, E21 or E30.
Any LHD M10 Powered application....Euro 5 Series, etc.

We decided to make this header for the 2002 owners with low ground clearance issues
as well as the E21 and E30 chassis where the longer header is very close to the floor.
We have tested this on quite a few engine combinations and up to 6500 RPM there is no difference
in performance to our Longer 1.5" header.

This header allows you to tuck the exhaust up high for those Pesky Speed Bumps and steep driveways.

Not tested or Confirmed on RHD Euro Cars. We suspect that the #3 tube will need to be modified to clear the steering.
NOT for use on RHD Vehicles until we can either get our hands on a car or a customer willing to give it a go we cannot confrm.

ANY M10 JE Forged Piston Set...N/A or Turbo engine.
Any Bore or Compression Ratio ....Any Stroke or Rod Combo.
Any M10 Cylinder Head. E12, 121, 1.8i,  E21, 1600

ALL JE Custom Pistons take 7-8 week lead time
4 Cyl JE Custom Forged BMW M10 Piston Set
Set of 4 JE Forged Pistons with Pins Locs and JE ProSeal Rings.
Any Bore or Compression Ratio and Crank / Rod Combination
SPECIFY BORE AND COMPRESSION RATIO AT CHECKOUT
89mm-96mm in .5mm incements
6.5:1 - 13.5:1 Ratios.

ANY M10 JE Forged Piston Set...N/A or Turbo engine.
Any Bore or Compression Ratio ....Any Stroke or Rod Combo.
Any M10 / S14 Cylinder Head. E12, 121, 1.8i,  E21, 1600, S14

ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations...
4 Cyl JE Custom Forged BMW M10 Piston Set
Set of 4 JE Forged Pistons with Pins Locs and JE ProSeal Rings.
Any Bore or Compression Ratio and Crank / Rod Combination
SPECIFY BORE AND COMPRESSION RATIO AT CHECKOUT
89mm-96mm in .5mm incements
6.5:1 - 13.5:1 Ratios.

Complete Kit with NEW Properly Jetted 45 DCOE Weber Carb with Air Horns .
TEP Exclusive Lynx Ramflo Manifold,
Cable Linkage Kit,
Anti-Vibe mounts,
Manifold to head gaskets 
Brake Booster Fitting

Dims are 16 x 12 x 7

Piston Set: 89.5mm + E21 Head + 9.5:1
$169  Cam Regrind
$76    O/S Eccentrics
$279  Shorty M10 header