Search results for 'Datsun'
-
Cedric in Canada Deluxe Triple Weber DCOE Kit for Datsun Z Car.
Sku: Cedric_ZTriple_Canada
Deluxe Kit:
Learn More
(3) New 45 DCOE carbs with proper baseline jetting for your 88.5mm x 83mm Build and Air Horns
(1) New Intake manifold with Linkage and Anti Vibe mounts
(1) Proper Electric Fuel pump
PLUS
(3) Redline Chrome Air Filters OR Snap On Stack Screen Filters. Your Choice.
Or Add $60 for RamFlo Air Filters ( See below for options and add ons )$2,595.00 -
Datsun header Z "L" series 240Z-280ZX with head pipe 1.5" Diameter.
Sku: datsun_z_00010
1.5" Diameter Pipe3 into 2 Style header with head pipe
Learn More
This is the header we use on all our builds here...
Shown with Optional High Heat Header Gasket
14GA Steel. Will last for many years.
Add $275 for Polished Ceramic Coating...See below for pic of coated header.
Looks better than the pic. Really nice polished ceramic coating.$379.00 -
Datsun Z Car L24-L28 MLS Head Gaskets
Sku: datsun_z_00006
Datsun Z Car L24-L28 MLS Head Gaskets Learn More$239.00 -
Datsun Z Car L24-L28 COMETIC MLS Head Gaskets
Sku: datsun_z_00005
Datsun Z Car L24-L28 COMETIC MLS Head Gaskets Learn More$189.00 -
Front and Rear TEP Strut Tower Brace ackage. 240Z, 260Z, 280Z
Sku: datsun_z_00003
Front and Rear TEP Strut Tower Brace ackage. 240Z, 260Z, 280Z Learn More$285.00 -
Datsun Header L series short header
Sku: datsun_z_00001
Datsun 4 Cyl Shorty Headers.
Learn More
Shown with INCLUDED High Heat Header Gasket
This is THE Header for use in any 510, Pickup, 610, 710, etc. with L16, L18 or L20B
Specifically designed for the L20B in the 510 but fits all other models as well.
Available with Optional Polished ceramic Coatings. See below$319.00 -
Bolt-On Crank trigger kit for Z using YOUR crank pulley
Sku: datsun_triple_00021
Bolt-On Crank trigger kit for Z using YOUR crank pulley Learn More$195.00 -
Electromotive TEC-GT Complete Fuel Injection and Ignition Management with distributorless Ignition and Crank trigger wheel and pickup
Sku: datsun_triple_00020
Electromotive TEC-GT Complete Fuel Injection and Ignition Management with distributorless Ignition and Crank trigger wheel and pickup Learn More$2,345.00 -
HALTECH Sprint 500 Fuel Injection and Ignition Management System
Sku: datsun_triple_00019
HALTECH Sprint 500 Fuel Injection and Ignition Management System Learn More$1,895.00 -
RamFlo Style Air Filters. 3 needed
Sku: datsun_triple_00017
RamFlo Style Air Filters. 3 needed Learn More$59.00 -
Air Horns Only. Not for use with Filters. 6 needed
Sku: datsun_triple_00016
Air Horns Only. Not for use with Filters. 6 needed Learn More$59.00 -
240Z, 260Z, 280Z, 280ZX Rear Strut Tower Braces
Sku: datsun_z_00011
240Z, 260Z, 280Z, 280ZX Rear Strut Tower Braces Learn More$129.00 -
Datsun Header Gasket for 4 Cyl L Series
Sku: L20hdrgsk
Header Gasket for 4 Cyl L Series Learn More$24.00 -
Datsun Z ITB Kit per our emails.
Sku: Ed_Tremko_ZITB
Hi Ed,
Nice speaking with you again...
Okay...Here is your list of stuff...3 x 45mm ITB's with mounting hardware
1 x Triple ITB Cable Linkage Kit to pedal
1 x Triple Fuel Rail kit
1 x Boost referenced Fuel Pressure Regulator
6 x Injectors for up to 450 HP
1 x TPS with Plug and Pins1 x Manifold Temp Sensor
1 x 3 Bar MAP Sensor1 x Electromotive TEC-GT ECU Kit.
ECU, Harness, 6 Cyl Coil Pack, Trigger wheel, Hall Sensor.
Learn More
1 x Bosch 500 HP Capable External Pump
-----------
$4589 + $60 Shipping
No Sales Tax as you are outside CA$4,589.00 -
1.625" Big Tube Race Datsun header Z "L" series 240Z-280ZX with head pipe and Gasket.
Sku: ZHeader_1.625
1.625" Primary Datsun Z Header. Big Tube for 250+ HP Engines. All Square Port
Learn More
This header is totally unique...The Ultimate header for all 3.0+ engines or any Z Making more than 275 HP.
This will make a huge difference on any Performance Build with Triple Carbs for the Street or obviously Track applcations
Large Tube 1.625" Primary Tube 3-2-1 Design with 2.25" Collectors at the merge.
2.5" Outlet
Fits all 240Z, 260Z, 280Z and ZX models.
NOT the Crappy Pacesetter header that others are selling
NOT the Chinese made fall apart headers.
100% USA Made 14ga steel header
1/2" thick flange
Shown with Optional High Heat Header Gasket$399.00 -
Mohammad Datsun Parts to Ohio
Sku: mohammad_DatsunParts
$246 piston ring set $246(same the one I sent )Main bearing 0.25Rod bearing 0 25$159 Full Set
$189 Head gasket .045 thickness for 8.8:1 Cometic MLS
$119 Arp bolt main crank$59 Arp bolt rod l24 9mm.
--------
$772 US
$35 US Shipping to OH
--------
$803US Total$803.00 -
Custom Z ITB Package.
Sku: Z_Triple_ITB_Kit
Datsun Z Car Triple ITB Package with Air Filters Less Fuel Pump.
Pictured with the Ramflo Air Filters as we will send it.3 x 45mm Throttle with Triple Fuel Rail Kit
Learn More
TWM Intake Manifold for use with ITB's and Manifold to head gasket
6 x Air Horn Extensions
3 x RAMFLO Air Filters
6 x Injectors with connectors 350cc
External Mount Vacuum Referenced Pressure Regulator ,
ITB Specific TPS with Plug and Pins.
Complete Cable Linkage to the Pedal
Manifold to ITB Mounting hardware and O-Rings
$2950 Kit + $150 Filters = $3100
-----------
$3100 + Shipping....$3,100.00 -
JE Forged Piston Set for Datsun L24-L28 Engines. Flat or Dish with Valve Pockets.
Sku: L24_L26_L28_JE-Pistons
6 Cylinder JE Custom Forged Piston Set - Dish, Flat or Dome - with or without valve pockets
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons are currently 7-8 Week lead time to make
Learn More$1,395.00 -
Polyurethane Steering Rack Bushings
Sku: datsun_00007_1
Polyurethane Steering Rack bushings replace the soft rubber units to give much better steering feel. Reduces steering free play and increases steering response. Highly resistant to oil and ozone that destroys the original bushings Learn More$29.95