Domestic Shipping: Calculated after checkout based on your location.
International Shipping: Calculated after checkout based on your location.
Product Description
Details
replacement part. Complete Thermostat Kit for your M20 engine. For those looking to go through their cooling system, this is a nice addition. Rather than just putting a new thermostat into an old corroded (often poor sealing) housing, just replace the whole unit. Includes: -Thermostat Housing -Thermostat *Choose Temp. -Housing Cap -Correct Hardware and Plugs -Bleeder Screw -Gasket Installation Note: Upon installation/cooling system overhaul, be sure to bleed the coolant system. Many people (and shops unfamiliar with BMW's) will skip this step, resulting in sustained high temperatures and a bubbling sound. To bleed the system, back out the bleeder screw on top of housing to let the trapped air out. Once coolant begins to come out, re-tighten the bleeder screw. Installation is as per your workshop manual. Installation Note 2: Be sure the line up the arrow stamped on the thermostat with the bleeder hole on the housing. Fits the following M20-equipped cars: 1984-92 E30 - 325e, 325i 1983-88 E28 - 528e 1989-90 E34 - 525i
Additional Information
Additional Information
| Alert Text | N/A |
|---|---|
| Weight | 0.0000 |
| Width | N/A |
| Height | N/A |
| Depth | N/A |
| Length | N/A |
| Automotive type | N/A |
| Part Type | Cooling + Radiator |