BMW Specials
BMW Sales Specials:
Go to our Main BMW Page
-
Synchronizing Tool STE-SK
SKU: STE-SKThe STE SK will fit intakes of 1 5/8” to 2 1/8”. This SK will measure air flow from 1 to 30 kg/h. With this “lower” calibration scale it is easier to read the variations in air flow between carburetors at idle RPM’s only. The SK also has extended calibration at 1 to 3 kg/h also making it useful to check secondary throttle adjustment at idle. Learn More$63.95 -
Front AND Rear Urethane bushing kit for 2002 WITH Subframe Inserts
SKU: FRUrethane_2002Front AND Rear Urethane bushing kit for 2002 WITH Subframe Inserts Learn More$155.00 -
Special Deal on the Dual 40 or 45 DCOE DCOE Sidedraft kit. 2 New Weber 40 DCOE Carbs, Intake Manifold and Linkage Kit for 40's or 45's
SKU: xmas_special_0078Special Deal on the Dual 40 or 45 DCOE DCOE Sidedraft kit. 2 New Weber 40 DCOE Carbs, Intake Manifold and Linkage Kit for 45's Learn More$1,450.00 -
4 cylinder M10 LONG BLOCK Performance Engine Rebuild kit: (2002,320i, 318i)
SKU: xmas_special_0073Performance Re-Ground camshaft (288, 294, or 302) exchange.
Add $219 for a NEW Camshaft if you do not have a core or want to keep your originalPerformance Dual Valve Spring set
New Rocker arms and Rocker Shafts
New Intake and exhaust manifold Studs and NutsNew Heavy Duty Cylinder Head bolts
JE Forged pistons (Any bore size or compression ratio)with JE Pro Seal Rings
German Rod and Main bearings (std, 10, 20)
Full engine gasket set
Timing chain, tensioner and guide rails
Oil Pumps have been discontinued and are very difficult and expensive to find....IF we have any available the average cost for the pumps will be $625
Learn More$1,950.00 -
4 cylinder M10 SHORT BLOCK Performance Engine Rebuild kit: (2002,320i, 318i)
SKU: xmas_special_0071JE Forged pistons (Any bore size or compression ratio)with JE Pro-Seal Rings
Learn More
German Rod and Main bearings (std or .25 )
Full engine gasket set with all seals
Timing chain, tensioner and guide rails
Freeze Plug Set.
Oil Pumps have been discontinued and are very difficult and expensive to find....
IF we have any available the average cost for the pumps will be $625$1,395.00 -
BMW 2002 Tune up special
SKU: xmas_special_0069Pertronix electronic ignition conversion, 8mm wire set, NGK plugs, Cap and Rotor Learn More$189.00 -
2002 Front End Steering Rebuild Kit
SKU: xmas_special_0059Center Drag Link, Complete Left and RIght Steering Rod Assemblies, Ball Joints, Idler Arm Bushings Learn More$359.00 -
Rear urethane bushing kit for 2002 and E21
SKU: xmas_special_0058Rear urethane bushing kit for 2002 and E21 Learn More$56.00 -
Front Urethane bushing kit for 2002
SKU: xmas_special_0057Front Urethane bushing kit for 2002 Learn More$65.00 -
BMW E21 / 320i Front Single Tube Front Strut Tower Brace WITH Rear brace and Battery Relocation Kit
SKU: tep-sb-0011BMW E21 / 320i Front Single Tube Front Strut Tower Brace WITH Rear brace and Battery Relocation Kit Learn More$478.00 -
BMW M10 / 2002 / 320i Single Sidedraft Weber Kit
SKU: M10_SSDkit1Complete Kit with NEW Properly Jetted 45 DCOE Weber Carb with Air Horns .
TEP Exclusive Lynx Ramflo Manifold,
Cable Linkage Kit,
Anti-Vibe mounts,
Manifold to head gaskets
Brake Booster FittingDims are 16 x 12 x 7
Learn More$1,295.00 -
BMW 2002 Rear Shock Tower Brace and Battery Relocation kit
SKU: tep-sb-0003BMW 2002 Rear Shock Tower Brace and Battery Relocation kit. Shown with Optional Batter Cut Off Switch...
Learn More
Complete Kit. Brace, Mounting Hardware, Batter Cable, Lugs, Terminals and Instructions.$299.00 -
BMW 2002 M10 Long 1.5" Header.
SKU: long-header-0001Available with or Without an 02 Bung
Learn More
Available with Polished High Heat Ceramic Coating
Shown with OPTIONAL Heat Shield Header Gasket
Not tested or Confirmed on RHD Euro Cars. We suspect that the #3 tube will need to be modified to clear the steering.
NOT for use on RHD Vehicles until we can either get our hands on a car or a customer willing to give it a go we cannot confrm.$319.00 -
4 Cyl JE Custom Forged BMW M10 Piston Set with S14 or M10 head...
SKU: JE_S14_M10_CustomANY M10 JE Forged Piston Set...N/A or Turbo engine.
Any Bore or Compression Ratio ....Any Stroke or Rod Combo.
Any M10 / S14 Cylinder Head. E12, 121, 1.8i, E21, 1600, S14ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations...
Learn More
4 Cyl JE Custom Forged BMW M10 Piston Set
Set of 4 JE Forged Pistons with Pins Locs and JE ProSeal Rings.
Any Bore or Compression Ratio and Crank / Rod Combination
SPECIFY BORE AND COMPRESSION RATIO AT CHECKOUT
89mm-96mm in .5mm incements
6.5:1 - 13.5:1 Ratios.$935.00 -
4 Cyl JE Custom Forged BMW M10 Piston Set with S14 head.
SKU: JE_Custom_M10-S14ANY M10 JE Forged Piston Set...N/A or Turbo engine.
Any Bore or Compression Ratio ....Any Stroke or Rod Combo.
S14 Cylinder HeadALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations...
Learn More
4 Cyl JE Custom Forged BMW M10 Piston Set
Set of 4 JE Forged Pistons with Pins Locs and JE ProSeal Rings.
Any Bore or Compression Ratio and Crank / Rod Combination
SPECIFY BORE AND COMPRESSION RATIO AT CHECKOUT
89mm-96mm in .5mm incements
6.5:1 - 13.5:1 Ratios.$935.00 -
BMW M10 / 2002 / 320i Single Sidedraft Weber Kit
SKU: SSD_E21_KitComplete Kit with NEW Properly Jetted 45 DCOE Weber Carb with Air Horns .
TEP Exclusive Lynx Ramflo Manifold,
Cable Linkage Kit,
Anti-Vibe mounts,
Manifold to head gaskets
Brake Booster FittingDims are 16 x 12 x 7
Learn More$1,050.00 -
4 Cyl JE Custom Forged BMW S14B23 or S14B25 Piston Set
SKU: JE_S14_CustomANY S14 JE Forged Piston Set...N/A or Turbo engine.
Any Bore or Compression Ratio ....Any Stroke or Rod Combo.ALL JE Custom Pistons take 3-3.5 weeks to make + 1 week for any coating operations...
Learn More
4 Cyl JE Custom Forged BMW M10 Piston Set
Set of 4 JE Forged Pistons with Pins Locs and JE ProSeal Rings.
Any Bore or Compression Ratio and Crank / Rod Combination
SPECIFY BORE AND COMPRESSION RATIO AT CHECKOUT
89mm-96mm in .5mm incements
6.5:1 - 13.5:1 Ratios.$906.30 -
4 Cyl JE Custom Forged BMW M10 Piston Set
SKU: Eran_M10_Pistons_TurboPlease make the set for us
E12 Head TEP Domepistons diameter suited for stock cyl borestock cr 9.5:1forged pistons for turbochargedf applicationLearn More$849.30 -
4 Cyl JE Custom Forged BMW M10 Piston Set. 4032 Street Forging Set
SKU: BMW_M10_4032_JEM10 Stock or very mild engine Street Use 4032 Forging Low Expansion Tight Clearance.
Learn More
3 Week Delivery Time
Set of 4 JE Forged Pistons with Pins Locs and JE ProSeal Rings.
Any Bore or Compression Ratio and Crank / Rod Combination
SPECIFY BORE AND COMPRESSION RATIO AT CHECKOUT
89mm-96mm in .5mm incements
8:1-10.5:1$875.00 -
Rob Clark M10 project
SKU: Robert_Clark_M10Piston Set: 89.5mm + E21 Head + 9.5:1
Learn More
$169 Cam Regrind
$76 O/S Eccentrics
$279 Shorty M10 header$1,419.00 -
BMW M10 Pistons Chris Prangnell / Charlie in UK
SKU: Charlie_UK_M10Pistons4 CYL JE CUSTOM FORGED BMW M10 PISTON SET Bore, Stroke, Crank, Rods, Compression, Etc. All engine details we need to know. 90mm x 10.5 x E12 Custom JE Options Add $80 for Under Crown Lightening, Add $12 Per Piston for Contact Reduction and Accumulator Grooves Learn More$995.22 -
Scott Wood BMW M10 Parts.
SKU: ScottWood_M10PartsGood choice of head...1.8i is the best casting to use....
Piston Set $875 and made to order...90mm bore x 10.0:1
$16 Injector Hole Plug Set
$169 Full Engine Gasket and Seal Set
$109 .010 Main Brgs
$160 Full set of 8 SS Intake and Exhaust Valves
+ shipping to be determined when pistons are ready to ship.$1,329.00 -
215mm Stage-2 Performance Street Clutch Kit for 5 Speed use.
SKU: 215mm_Stage2KitComplete Clutch Kit for 5 Speed with 215mm Clutch with correct Release Bearing
Stage-2 Performance Street Clutch
Upgraded Diaphragm for 20% more clamping force
Higher Friction Material
Still a Spring Hub for easy street Driving.
Excellent for anything street or light duty track use in the 150-170 HP range Max.$399.00