Nissan
-
Longlom Thailand 3TC Pistons and Push Rods
SKU: Longlom_L28_Thailand3TC Pistons in 11.5:1 will be a Custom made to order set onlyLearn More
$895 set of 4 with Pins, Locs and Rings...PLEASE SPECIFY BORE
Chromoly 3TC Pushrods are $149 for the set of 8
+ Shipping to be sorted out when ready to go...$1,044.00 -
Miguel L28 Turbo Pistons and Rods
SKU: Miguel_L28_EngineJE Forged Piston Set
Learn More
88mm x 8.8:1 x 79mm L28 Stroke x 133mm Rods x .051 Cometic MLS
+ 133mm H-Beam Forged rods with ARP2000 Bolts.$1,994.00 -
Longlom Thailand Z Car Parts Package
SKU: Z_Custom_EngineKit1. Compression ratio is 11:1 or 10.75,I will play around with custom head gasket. We have ron95 here.2. The head is N423. Expected HP should be close to 300hp at flywheel.
4. Camshaft is Tomei 290’ with 8.80mm camlift.Delivery address is :
Ms Supatra Eamporn
2/289 Anusaowareechai Condo, Phaholyothin Road Soi 2/1, Samsennai, Phayathai, Bangkok 10400
Tel +66894453584 or +66818332768> Large Tube 1.625" Race Header for High Compression 3.0+
$399
> 1. A set of DOMED JE pistons 88mm with coating skirt and valve pockets.
$1050 + $138 Skirt Coat depending on Dome, Dish, Flat, etc.
That is a set of 6 Forged JE Pistons with Pins, Locs and JE Pro-Seal Rings.
> 2. A set of Conrod for using with LD28 crankshaft.
No problem 133mm H-Beam Rods with ARP2000 Bolts
$650
> 3. A set of racing valve largest possible 46mm inlet or larger. !
46mm Intake and 38mm Exhaust
$250 Set of 12
> 4. A set of valve spring
with Matching Moly Steel Retainers. No Titanium
$ 215 for the full set...
> 5. A set of valve guide ,silicone bronze if possible.
$9.50 each = $114
----------
$2816
$345
----------
$3161 USLearn More$3,161.00
