Customer Specific Special Order Set
-
Jude U20 custom Stroker Flat Top Pistons
SKU: U20_JE_CustomSet of 4 Custom JE Pistons for U20 Stroker
Learn More
90mm Bore x 87mm Stroke x Custom Pauter Rod
20mm Pin x Flat Top and Zero Deck
29mm CD and 154.5mm rod length
12.26:1 with 1.2mm head gasket and 43cc chambers
7mm Top Land.$935.00 -
Takeo Masame Lancia custom Set
SKU: JE_Lancia_Custom$1027 USD + $69 Shipping for 5 Pieces complete with Pins, Locs and Rings.
Learn More
Exactly per sample except made for 84.4mm Bore Size.
Approx 6-7 Weeks$1,096.00 -
Bryan Taylor Custom 2 Ring Gapless Piston Set Per Drawings....
SKU: Btaylor_Custom2Ring_Deposit05-18I’ve attached 3 drawings for a set of 4 pistons. They are identical in many respects to a set you made for me in July 2013. The differences are in the pin height, now 22.1mm, the crown volume, now 9.5cc and the bore size, now 84.05mm. The rod small end thickness is 5.0mmLearn More
Could you make these with your asymmetric forgings, piston guided rods - small end width is 25.0mm - coatings on crown and skirt, 2 rings, gas ported top groove with gapless ring, round wire locks, 2RH, 2LH.$239.61 -
Longlom Thailand 3TC Pistons and Push Rods
SKU: Longlom_L28_Thailand3TC Pistons in 11.5:1 will be a Custom made to order set onlyLearn More
$895 set of 4 with Pins, Locs and Rings...PLEASE SPECIFY BORE
Chromoly 3TC Pushrods are $149 for the set of 8
+ Shipping to be sorted out when ready to go...$1,044.00 -
Viljam Lappi Finland L26 Engine package
SKU: Viljam_Lappi_L26$1350 Set of 6 with Pins, Locs and JE ProSeal rings.
Learn More
JE Forged pistons (83.5mm) with rings and Pins ( wanted CR Is 12:1 please try to get as close as possible.... valves Are open in TDC 4mm)
$149 Adjustable Cam Sprocket
$228 New valves 42/35
$252 New Rocker arms
$109 New retainers for valves (chromolysteel
$199 Timing Gear Set Complite ( +with adjustable cam spocket i dont need standart spocket)
$179 New main bearings to Crankshaft and connection rods (standart size)
$129 New FULL engine gasket kit
$339 Exhaust Header (1.5dia) 100% USA Made 14ga steel.
----------
$2934 USD + Shipping to be determined when packed.
-$749 USD ( Amount of customs docs to be paid separately )
---------
$2185 USD$2,185.00 -
6 Cylinder JE Custom Forged Piston Set - All "L" Series. L24, L26 and L28.
SKU: JE_L24L26L28_CustomAll Bore, Head and Stroke Combinations of L24, L26 or L28 with different Rod length and Stroke changes.
8:1 - 12:1ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 8-9 weeks to make
Learn More$1,395.00 -
6 Cylinder JE Custom Forged Piston Set - Nissan VG30 / VG33
SKU: JE_Nissan_VGCustom6 Cylinder JE Custom Forged Piston Set -
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 5-6 weeks to make
Learn More$1,395.00 -
JE Forged Piston Set for Datsun L24-L28 Engines. Flat or Dish with Valve Pockets.
SKU: L24_L26_L28_JE-Pistons6 Cylinder JE Custom Forged Piston Set - Dish, Flat or Dome - with or without valve pockets
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons are currently 7-8 Week lead time to make
Learn More$1,395.00 -
Bryan Taylor Latest Lotus Set like older order
SKU: BTaylor_Pistons6-21Duplicate Lotus Set 06-21 Learn More$1,613.83 -
Buick 3.8 V6 Custom Turbo Piston Set
SKU: JE_3.8V63.820 Bore x 8.5:1 with .905 pins and 38cc Dish Learn More$989.41 -
Longlom Thailand Z Car Parts Package
SKU: Z_Custom_EngineKit1. Compression ratio is 11:1 or 10.75,I will play around with custom head gasket. We have ron95 here.2. The head is N423. Expected HP should be close to 300hp at flywheel.
4. Camshaft is Tomei 290’ with 8.80mm camlift.Delivery address is :
Ms Supatra Eamporn
2/289 Anusaowareechai Condo, Phaholyothin Road Soi 2/1, Samsennai, Phayathai, Bangkok 10400
Tel +66894453584 or +66818332768> Large Tube 1.625" Race Header for High Compression 3.0+
$399
> 1. A set of DOMED JE pistons 88mm with coating skirt and valve pockets.
$1050 + $138 Skirt Coat depending on Dome, Dish, Flat, etc.
That is a set of 6 Forged JE Pistons with Pins, Locs and JE Pro-Seal Rings.
> 2. A set of Conrod for using with LD28 crankshaft.
No problem 133mm H-Beam Rods with ARP2000 Bolts
$650
> 3. A set of racing valve largest possible 46mm inlet or larger. !
46mm Intake and 38mm Exhaust
$250 Set of 12
> 4. A set of valve spring
with Matching Moly Steel Retainers. No Titanium
$ 215 for the full set...
> 5. A set of valve guide ,silicone bronze if possible.
$9.50 each = $114
----------
$2816
$345
----------
$3161 US$3,161.00