Shop Hours:   Mon-Fri. 9:30am - 4:30pm Pacific Time     Closed from 1:00-2:00 for Lunch. 
 PHONE HOURS: 10:00am - 3:00pm Pacific Time M-F
  ------------------------------------------------------
email us at topendmail@gmail.com         Call us at 1 818 764-1901
   ------------------------------------------------------


Phone: (818)764-1901
Email Us: topendmail@gmail.com
Follow Us
0 $0.00

You have no items in your shopping cart.

JE CUSTOM MADE Forged Pistons

JE CUSTOM MADE Forged Pistons

JE CUSTOM MADE Forged Pistons

Scroll down for all the JE Custom Piston order listings...

Forget the imitators and low price, low quality imposters. JE is the finest forged piston made for your Street or Race engine...Normally aspirated, Turbo, Supercharged, NOS..You name it and Top-End and JE can supply you a piston to fit your needs.
We are THE source for ALL BMW Forged pistons.

 

There are very few pistons that we cannot custom make for you either from our huge database of engine specifications or using a sample you provide to us.
The only things we DO NOT make are Diesel and 2 Stroke pistons.
Our Minimum bore diamter is 54.229mm with a .550 wrist pin for custom forged applications.

Here is a breif list of some of the custom applications we have made pistons for. These are in addition to the common engines listed on our main JE part # listing.

Audi 4,5 V6 and V8
Alfa most models 4, 5 Cyl 20V, and 6 cyl
BMW All Models 4,6,8 and 12 Cyl
Chevrolet and GM Imports as well as all Domestic V6 and V8 engine
Cosworth (Most engines and combinations)
Fiat (Most of the popular 4 cyl Turbo and N/A engines and the 5 Cylinder Turbo)
Ferrari 308, 365 GT 2+2, Etc.
Ford X-Flow
Lancia 2.0 16V
Maserati Misc
Mercedes 190E 2.3 16 and many 6 and 8 cylinders engines like the M119, etc (We usually require samples for Mercedes engines)
Nissan CA18DET, SR20, QR25, VG33, all RB's and all "L", "A", "R" and "U" series
Nissan Skyline GTR Pistons and Rods
Opel Calibra C20 Turbo and Normally aspirated
Peugeot 16V and Misc Turbo and Non-Turbo, 406, XU10, Etc
Porsche All AirCooled Flat 4 and Flat 6, Watercooled 924, 944, etc.
Renault Misc (We usually require samples for Renault engines)
Suzuki Swift Turbo and Cappucino, Alto Works F6A
Toyota 4EFTE, Vios, 3VZE, 3TC, Etc
Volvo B18 and B204, B23T, and 5 Cyl.
VW All Watercooled and Air Cooled

Click Here for the JE Pistons Custom Piston Quote Form

JE Pistons are the finest quality aftermarket forged pistons available. The special High Silicon 2618 aircraft alloy . allows much tighter Piston-To-Wall clearances ( Typically .0035-.0045 )than all the other manufactures. This means a quiet street engine that does not need excessive temperatures to seal.

We offer and optional ($40.00 per piston at the time they are ordered or $49 per piston after they have been completed) High Heat Coating on Piston tops and Skirts. (A MUST HAVE for all NOS and High Boost Turbo engines..)You must specify this when ordering. It usually adds 7-10 days to the delivery time of a piston set.

As one of JE's biggest distributors we have very good order time on all custom sets...Our orders get priority and that means you will get your parts faster....Typically a custom set from us takes 3-4 weeks and sometimes even faster....If your piston has to be made from a sample it may take a little longer....Rush and Expedited orders are available for those engine emergencies. There is an extra fee for Rush orders but sometimes you just need them faster.... 

Don't see what you need?  We will build a custom set of pistons for any application.  Just click here to send us a

Grid  List 

Items 101 to 125 of 135 total

Page:
  1. 2
  2. 3
  3. 4
  4. 5
  5. 6
per page
  • Buddy Bakker  L28 Pistons, Rods Cam

    Buddy Bakker <info@boostbybuddy.com> L28 Pistons, Rods Cam

    SKU: Buddy_Baker_Engine
    DATSUN L28 JE Piston set with Pins Locs and JE ProSeal Rings $1496.50 
    Stroke 80 mm    Con rod lenght: 133 mm
    Cylinder 86,50 mm
    Mains / 54,95 mm - needed + 0,25 mm
    Crankpin / 49,96 mm - needed + 0,25 mm
    N42 block + N42 cilinderhead with + V07 83mm diesel V0740 Crankshaft
    Compression ratio of 10.5:1    Pocket size needs to be 1.5mm bigger (bigger valves)
    + 133mm Forged Rods $699 USD + Camshaft Re-Grind .510 x 307 $195 USD

    Shipping and possible Cam Core Will be paid when ready to go...
    Learn More

  • Mercedes M156 Forged Piston set for use in Alusil Bores

    Mercedes M156 Forged Piston set for use in Alusil Bores

    SKU: M156_Custom_Piston

    8 Cylinder Custom Forged Piston Set
    Mercedes M156
    Standard Bore with Alusil and Stock or Modified Compression

     

    Learn More

  • Mercedes M274 JE Pistons and Pauter Rods. Piston Guided per OEM.

    Mercedes M274 JE Pistons and Pauter Rods. Piston Guided per OEM.

    SKU: M274_MBZ_JE_Pauter

    Pistons, Pins, Locs, Rings, Tuff Skirt Coat and Pauter Forged 4340 Billet Rods with ARP2000 Bolts. Piston guided like OEM

    8-10 week lead time....

    Learn More

  • Michael Williams G4KH Pistons and Rods for Turbo Hyundai Project

    Michael Williams G4KH Pistons and Rods for Turbo Hyundai Project

    SKU: G4KH

    Basic Set with Pins and locs $852.63
    Gapless Top RIngs $180
    Ceramic Crown / Tuff Skirt Coat $190
    Accumulator and Contact Reduction Grooves $48
    Econo Undercrown Mill ( No need for 3D on this ) $100
    $1370.63 

    $1149  Pauter Forged 4340 Con Rods with ARP2000 Bolts for 550 HP

    Learn More

  • Nic Cencic M20 Stroker Kit

    Nic Cencic M20 Stroker Kit

    SKU: Nic_Cencic_M20
    $1195  JE Piston Set Custom complete 85mm pistons with a 10.5:1 M52B28 Stroker
    $750    Molnar 135mm Rod Set with ARP2000 Bolts
    $245    ARP Head Studs
    $169    ARP Main Studs
    $214    Cometic MLS .070 x 85mm bore
    Learn More

  • Ian Deering M10 Stroker Custom Parts.

    Ian Deering M10 Stroker Custom Parts.

    SKU: Ian_Deering_M10Custom
    $935   JE 92mm bore  1.8i head x 10:1
    $550   146mm Rods with ARP2000 Bolts.
    **83mm S14 2.3 Crank**
    $165   +1mm SS Intake and Exhaust (47 x 39 ) Valves 
    $189    Proper Street Dual Springs 
    $369    NEW  304 Camshaft 
    $179    ARP Head Studs ( A MUST ) 
    $162   Cometic 92mm MLS Head Gasket
    $28     2 x 00 Pump Bleed Valves
    $22     4 x 155 Main Jets
    $22     4 x 60F8 Idle Jets
    $78     2 x 45 DCOE Repair Kits
    ----------
    $2699
    Learn More

  • Grid  List 

    Items 101 to 125 of 135 total

    Page:
    1. 2
    2. 3
    3. 4
    4. 5
    5. 6
    per page