JE CUSTOM MADE Forged Pistons
JE CUSTOM MADE Forged Pistons
Scroll down for all the JE Custom Piston order listings...
Forget the imitators and low price, low quality imposters. JE is the finest forged piston made for your Street or Race engine...Normally aspirated, Turbo, Supercharged, NOS..You name it and Top-End and JE can supply you a piston to fit your needs.
We are THE source for ALL BMW Forged pistons.
There are very few pistons that we cannot custom make for you either from our huge database of engine specifications or using a sample you provide to us.
The only things we DO NOT make are Diesel and 2 Stroke pistons.
Our Minimum bore diamter is 54.229mm with a .550 wrist pin for custom forged applications.
Here is a breif list of some of the custom applications we have made pistons for. These are in addition to the common engines listed on our main JE part # listing.
Audi 4,5 V6 and V8
Alfa most models 4, 5 Cyl 20V, and 6 cyl
BMW All Models 4,6,8 and 12 Cyl
Chevrolet and GM Imports as well as all Domestic V6 and V8 engine
Cosworth (Most engines and combinations)
Fiat (Most of the popular 4 cyl Turbo and N/A engines and the 5 Cylinder Turbo)
Ferrari 308, 365 GT 2+2, Etc.
Ford X-Flow
Lancia 2.0 16V
Maserati Misc
Mercedes 190E 2.3 16 and many 6 and 8 cylinders engines like the M119, etc (We usually require samples for Mercedes engines)
Nissan CA18DET, SR20, QR25, VG33, all RB's and all "L", "A", "R" and "U" series
Nissan Skyline GTR Pistons and Rods
Opel Calibra C20 Turbo and Normally aspirated
Peugeot 16V and Misc Turbo and Non-Turbo, 406, XU10, Etc
Porsche All AirCooled Flat 4 and Flat 6, Watercooled 924, 944, etc.
Renault Misc (We usually require samples for Renault engines)
Suzuki Swift Turbo and Cappucino, Alto Works F6A
Toyota 4EFTE, Vios, 3VZE, 3TC, Etc
Volvo B18 and B204, B23T, and 5 Cyl.
VW All Watercooled and Air Cooled
Click Here for the JE Pistons Custom Piston Quote Form
JE Pistons are the finest quality aftermarket forged pistons available. The special High Silicon 2618 aircraft alloy . allows much tighter Piston-To-Wall clearances ( Typically .0035-.0045 )than all the other manufactures. This means a quiet street engine that does not need excessive temperatures to seal.
We offer and optional ($40.00 per piston at the time they are ordered or $49 per piston after they have been completed) High Heat Coating on Piston tops and Skirts. (A MUST HAVE for all NOS and High Boost Turbo engines..)You must specify this when ordering. It usually adds 7-10 days to the delivery time of a piston set.
As one of JE's biggest distributors we have very good order time on all custom sets...Our orders get priority and that means you will get your parts faster....Typically a custom set from us takes 3-4 weeks and sometimes even faster....If your piston has to be made from a sample it may take a little longer....Rush and Expedited orders are available for those engine emergencies. There is an extra fee for Rush orders but sometimes you just need them faster....
Don't see what you need? We will build a custom set of pistons for any application. Just click here to send us a
-
12 Cylinder JE Custom Forged Piston Set - All Flat Top - with or without valve pockets
SKU: je-custom-12-flat12 Cylinder JE Custom Forged Piston Set - All Flat Top - with or without valve pockets
Learn More
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings.
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations$1,995.00 -
Miguel L28 Turbo Pistons and Rods
SKU: Miguel_L28_EngineJE Forged Piston Set
Learn More
88mm x 8.8:1 x 79mm L28 Stroke x 133mm Rods x .051 Cometic MLS
+ 133mm H-Beam Forged rods with ARP2000 Bolts.$1,994.00 -
Blake Stephens L20 Engine Project
SKU: Blake_L20Deposit Only to get Pistons and Rods underway with the balance and shipping when ready to ship.
Learn More
$875 JE 9.8:1 x 87mm Piston Set
$1250 Pauter Lightweight 4340 Con Rod Set with ARP2000 Bolts
$139 Big Bore Head Gasket
$128 Rod and Main Bearings
$154 ARP Head Studs
$160 44 x 35 Performance Valves
$179 Turbo Oil Pump
Other items to be considered and added as needed...
Re-Grind your camshaft.
Complete Timing Chain and Gear Set
Full Engine gasket and seal set
Valve Springs / Retainers$1,900.00 -
Jeff Mattson BBC Custom JE Set
SKU: je-custom-8-flatA custom set of 4.600" BBC Flat Top Pistons to your specs with .990 HD Pins, Pin Locs and a Nitrous Specific Ring Set is $1495 Delivered...
Learn More
5-6 week lead time...
2.5 week Rush order is an additional $300 if you are in a big hurry...
Single Valve Relief Flat Top with a Pin Height of 1.230 with .990 Pins$1,795.00 -
ALFA 2000 series 102 2000 (1958–1961)
SKU: JE_ALFA2000_1024 Cylinder Piston and Rod Set for the Series 102 1958-1961 ALFA 2000
A Great Solution for the Ridiculous Tall Domed Short Rod ALFA 2000 Engine...These are Sold as a set of 4 JE Forged pistons at 9.3:1 with a set of Long Pauter Forged 4340 Con Rods.
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Learn More
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations$1,795.00 -
10 Cylinder JE Custom Forged Piston Set - All Dome Top - with or without valve pockets
SKU: je-custom-10-dome10 Cylinder JE Custom Forged Piston Set - All Dome Top - with or without valve pockets
Learn More
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings.
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations$1,737.50 -
10 Cylinder JE Custom Forged Piston Set - All Dish Top - with or without valve pockets
SKU: je-custom-10-dish10 Cylinder JE Custom Forged Piston Set - All Dish Top - with or without valve pockets
Learn More
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings.
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations$1,712.50 -
Victor Hagen Z Car Project
SKU: Victor_Hagen_Z$995 JE Forged Piston set with Pins, Locs and Rings
Learn More
$179 Regrind your Camshaft
$169 ARP Head studs
$64 ARP Rod Bolts
$12 Freeze Plug Set
$129 Rod and Main Bearing set Std or .25
$229 Dual Spring Set with Moly Retainers
$250 12 Pieces OEM Nissan Rockers. NOT the Chines Crap being sold online that pop off above 5500 RPM
$109 12 Piece Lash Pads kit to suit cam grind
-----------
$2136 + Shipping$1,710.00 -
TJ Ignite Z Car Package
SKU: TJ_Ignite_ZCar$995 JE Forged Piston set with Pins, Locs and Rings
Learn More
$179 Regrind your Camshaft
$169 ARP Head studs
$64 ARP Rod Bolts
$12 Freeze Plug Set
$129 Rod and Main Bearing set Std or .25
$229 Dual Spring Set with Moly Retainers
$250 12 Pieces OEM Nissan Rockers. NOT the Chines Crap being sold online that pop off above 5500 RPM
$109 12 Piece Lash Pads kit to suit cam grind
-----------
$2136 + Shipping$1,710.00 -
Mercedes M276 Piston Set Re-Order
SKU: M276_JE_ReOrderDuplicate of previous Piston order Learn More$1,693.00 -
10 Cylinder JE Custom Forged Piston Set - All Flat Top - with or without valve pockets
SKU: je-custom-10-flat10 Cylinder JE Custom Forged Piston Set - All Flat Top - with or without valve pockets
Learn More
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings.
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations$1,662.50 -
Bryan Taylor Latest Lotus Set like older order
SKU: BTaylor_Pistons6-21Duplicate Lotus Set 06-21 Learn More$1,613.83 -
Patrik and Geir BMW M52B25 Pistons
SKU: Patrik_M52_PistonsandRodsOkay...We have your piston all sorted out....I have a similar job I did for someone else that we can use the data from.
Max Dome Volume with valve pocket depths required per Geir will put you right at 12.5:1 with 34cc chambers
This will have Undercrown Milling and will have the best Strength to weight ratio.
Pin offset, Accumulator Grooves and 93 Series race pins. $1595.86
Learn More$1,595.866 Cylinder MERCEDES JE Custom Forged Piston Set. PISTON GUIDED M103, Etc.
SKU: Mercedes_JE_Custom_6CylPistons, Pins, locks and Full ring set
Learn More$1,495.00JE Custom Pistons for BMW S55 / N55 Turbo
SKU: BMW_S55_JEPistons6 Cylinder JE Custom Forged Piston Set -
BMW S55 and N55 Turbo Inline 6ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations
Learn More$1,495.00Mark Australia BMW M10 E21 Turbo engine project
SKU: Mark_AU_M10TurboBMW E21 Turbo engine project...
Learn More
$895 JE Forged Pistons 90mm x 9.5:1 for TURBO 300-350 HP use
$599 144mm matching Forged Con Rods with ARP Bolts.
See below for the other items we discussed and check what you want to order...
We will sort out the other pieces like Camshaft, Valve Guides, Timing Components, etc.as we go along$1,494.00Pasi Hapulahti VOLVO Piston order x 8 pieces
SKU: Pasi_8Pieces_Volvo8 Pieces complete with Pins, Locs and RIngs. No options or coatings.
$1479.25 + Shipping of course...
7-8 week lead time these days....
Low value customs docs upon request....- Turbo use- Flat top- Bore 92,10 - 92,30mm (best fit to rings)- Compression height 46,50mm- Pin 24,00mm- Not any coatingsLearn More$1,479.25Topore Polo More Parts. New List
SKU: Topore_Polo_More Parts8 Intake valves with part number in Supertech: VWIVN-1019 $23.40 each = $187.20
1 kit (8v) DUAL valve SPRINGS ONLY with part number in Supertech: SPRK-V2091/4 $106.8010 units Lash Cap 7.0 mm/5.50 mm deep/thickness, LC-70-5.50compatible with cam followers cf-35/14.7 LC $6.70 ea = $67.00
3 units 110 GPH BLUE ELECTRIC FUEL PUMP WITH REGULATOR PART# 12-802-1 $169 each = $507
1 Gauge sending 75-10 ohms with Summit part number: CIN-SN39T9 $89
1 TT LIGHTWEIGHT ADJUSTABLE CAM SPROCKET (8v | 75-99) BLUE (44 gear Teeth) $149
TT LIGHTWEIGHT INTERMEDIATE | CAMSHAFT SPROCKET 8V 1975-1999 $94.99
-------------
$1200.99 US Parts Total
Shipping to be finalized after weighing and packing.I am ESTIMATING and I have added $96 US For shipping....If it is +/- we will adjust with a Credit or additional charge...
-------------
$1296.99 US with Shipping Estimate
ADVISE VALUE WANTED FOR CUSTOMS !$1,478.57Mitchell Downie 2.5 ALFA V6
SKU: Downie_ALFA2.5Custom Set per supplied sample
Learn More
88.5mm x 10.5:1
All else per sample including offset$1,467.386 Cylinder JE Custom Forged Piston Set - M20B25 and Strokers.
SKU: je-custom-6-dome6 Cylinder JE Custom Forged Piston Set - All Dome,with valve pockets
M20B25 and strokersALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations
Learn More$1,450.00BMW M20B27 ETA 6 Cylinder JE Custom Forged Piston Set -
SKU: JE_M20Dome6 Cylinder JE Custom Forged Piston Set - M20 ETA
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 6-8 weeks + shipping time.
Learn More$1,450.00BMW M20 OEM 885 Head Piston Crown Set SPEC Class 9.3:1 Any Bore
SKU: M20_OEMCrown_CustomBMW M20 OEM 885 Head Piston Crown Set
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations
Learn More$1,450.00BMW M20B20 and M20B23 JE Piston Set
SKU: BMW_JE_M20B20_M20B236 Cylinder JE Custom Forged Piston Set - M20 High Compression or Turbo
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 6-8 weeks to make
Learn More$1,450.00BMW M20 OEM Crown Stroker / Long Rod Custom Pistons set.
SKU: M20_Stroker_OEMCrown6 Cylinder JE Custom Forged Piston Set - M20 OEM Crown with Stroker or Long / Short Rods
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 8-9 weeks to make at this time
Learn More$1,450.006 Cylinder JE Custom Forged Piston Set - All Dome Top - with valve pockets
SKU: JE_Custom_M306 Cylinder JE Custom Forged Piston Set - All Dome Top - with or without valve pockets
BMW M30 ALL Years and Variants. 2.5, 2.8, 3.0, 3.3, 3.4, 3.5ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations
Learn More$1,450.00