JE CUSTOM MADE Forged Pistons
JE CUSTOM MADE Forged Pistons
Scroll down for all the JE Custom Piston order listings...
Forget the imitators and low price, low quality imposters. JE is the finest forged piston made for your Street or Race engine...Normally aspirated, Turbo, Supercharged, NOS..You name it and Top-End and JE can supply you a piston to fit your needs.
We are THE source for ALL BMW Forged pistons.
There are very few pistons that we cannot custom make for you either from our huge database of engine specifications or using a sample you provide to us.
The only things we DO NOT make are Diesel and 2 Stroke pistons.
Our Minimum bore diamter is 54.229mm with a .550 wrist pin for custom forged applications.
Here is a breif list of some of the custom applications we have made pistons for. These are in addition to the common engines listed on our main JE part # listing.
Audi 4,5 V6 and V8
Alfa most models 4, 5 Cyl 20V, and 6 cyl
BMW All Models 4,6,8 and 12 Cyl
Chevrolet and GM Imports as well as all Domestic V6 and V8 engine
Cosworth (Most engines and combinations)
Fiat (Most of the popular 4 cyl Turbo and N/A engines and the 5 Cylinder Turbo)
Ferrari 308, 365 GT 2+2, Etc.
Ford X-Flow
Lancia 2.0 16V
Maserati Misc
Mercedes 190E 2.3 16 and many 6 and 8 cylinders engines like the M119, etc (We usually require samples for Mercedes engines)
Nissan CA18DET, SR20, QR25, VG33, all RB's and all "L", "A", "R" and "U" series
Nissan Skyline GTR Pistons and Rods
Opel Calibra C20 Turbo and Normally aspirated
Peugeot 16V and Misc Turbo and Non-Turbo, 406, XU10, Etc
Porsche All AirCooled Flat 4 and Flat 6, Watercooled 924, 944, etc.
Renault Misc (We usually require samples for Renault engines)
Suzuki Swift Turbo and Cappucino, Alto Works F6A
Toyota 4EFTE, Vios, 3VZE, 3TC, Etc
Volvo B18 and B204, B23T, and 5 Cyl.
VW All Watercooled and Air Cooled
Click Here for the JE Pistons Custom Piston Quote Form
JE Pistons are the finest quality aftermarket forged pistons available. The special High Silicon 2618 aircraft alloy . allows much tighter Piston-To-Wall clearances ( Typically .0035-.0045 )than all the other manufactures. This means a quiet street engine that does not need excessive temperatures to seal.
We offer and optional ($40.00 per piston at the time they are ordered or $49 per piston after they have been completed) High Heat Coating on Piston tops and Skirts. (A MUST HAVE for all NOS and High Boost Turbo engines..)You must specify this when ordering. It usually adds 7-10 days to the delivery time of a piston set.
As one of JE's biggest distributors we have very good order time on all custom sets...Our orders get priority and that means you will get your parts faster....Typically a custom set from us takes 3-4 weeks and sometimes even faster....If your piston has to be made from a sample it may take a little longer....Rush and Expedited orders are available for those engine emergencies. There is an extra fee for Rush orders but sometimes you just need them faster....
Don't see what you need? We will build a custom set of pistons for any application. Just click here to send us a
-
Longlom Thailand 3TC Pistons and Push Rods
SKU: Longlom_L28_Thailand3TC Pistons in 11.5:1 will be a Custom made to order set onlyLearn More
$895 set of 4 with Pins, Locs and Rings...PLEASE SPECIFY BORE
Chromoly 3TC Pushrods are $149 for the set of 8
+ Shipping to be sorted out when ready to go...$1,044.00 -
JE Custom L20B with KA24DE Head
SKU: JE_Custom_L20BL20b block z20..rods being 6mm longer with a KA24de front wheel drive head .i want reliability so only want 88mm. Learn More$1,095.00 -
Takeo Masame Lancia custom Set
SKU: JE_Lancia_Custom$1027 USD + $69 Shipping for 5 Pieces complete with Pins, Locs and Rings.
Learn More
Exactly per sample except made for 84.4mm Bore Size.
Approx 6-7 Weeks$1,096.00 -
Teo Barchetta Custom Piston Set
SKU: TEO_Barchetta_PistonsThe Pistons will be made to suit your Pauter rods...
20mm Pin x .860 Wide Small End x 145mm lengthSet of 4 Custom Pistons in 82mm Standard Bore
Raise compression to 10.5
Asymmetric 2618 Forging
Pin Offset
Pins, Locs and JE ProSeal Rings
Skirt Coating$897 US + $75 Shipping....Learn More
Customs Invoice for whatever amount you want....$1,108.08 -
Jussi M42 Turbo Piston order
SKU: Jussi_M42PistonsSet of 4 Turbo M42's with HD 93 Series Pins, Tuff Skirt Coat, JE Rings and Turbo Forgings
$1115 US + Shipping...( Likely in the $60-$70 range )
Low Value customs docs upon request.$1,115.00 -
Rudy BMW M10 Engine Parts Order...Deposit Only for ongoing orders
SKU: Rudy_M10Engine_PartsRudy,
Learn More
This is a Deposit Only so we can get Pistons ordered, Rods Shipped, etc.
I can edit this as needed and add a running tally for easy payment and keeping track of your order....
$735 Piston Set 90mm (+0.40) with E12 head with 11:1 compression ratio
$499 Rod Set 144mm with ARP2000 Bolts
Bearings ?
ARP ?
Rockers ?
Camshaft ?
Valve Springs to Match Camshaft ?
Shipping, etc.$1,140.00 -
Lars Rasch Z engine parts
SKU: Lars_Rasch_Z$1050 Piston set at 8.5 or 8.8:1 is ideal...8.0 is a bit low...
Learn More
I recommend you do Skirt Coating, Contact Reduction and Accumulator grooves...
See below for options and other pieces...
$699 Forged 4340 133mm Rods with ARP2000 Bolts.
$169 ARP head Studs
$179 Cometic 87mm Bore 1.2mm Head gasket
$119 Turbo oil Pump$1,197.00 -
6 Cylinder JE Custom Forged Piston Set -Dish Supercharged
SKU: je-custom-6-dishCustom Ford 3.8 / 4.2 Stroker with long Rods.
Learn More
All specs per our emails.
Will confirm again after order is received..$1,195.00 -
Scott Wood BMW M10 Parts.
SKU: ScottWood_M10PartsGood choice of head...1.8i is the best casting to use....
Piston Set $875 and made to order...90mm bore x 10.0:1
$16 Injector Hole Plug Set
$169 Full Engine Gasket and Seal Set
$109 .010 Main Brgs
$160 Full set of 8 SS Intake and Exhaust Valves
+ shipping to be determined when pistons are ready to ship.$1,329.00 -
Suhla M20B23 Stroker Piston Set
SKU: Suhla_M20JEPistonsM20B23 Stroker
80.35mm bore
Piston crown to be flat
Height of 36.3mm.
Wrist pin to be the same as for M20 engines. ( 22mm )
Pistons, Pins, Locs and Rings.$1,340.09 -
CUSTOM M42 Valve Train Kit
SKU: Igor_CATuned_M42Head8 x INCONEL Exhaust
Learn More
8 x SS Intakes
16 x Guides
32 x Keepers
1 x Complete Spring and Ti retainer set
$1250$1,345.00 -
6 Cylinder JE Custom Forged Piston Set - All Flat Top - with or without valve pockets
SKU: je-custom-6-flat6 Cylinder JE Custom Forged Piston Set - All Flat Top - with or without valve pockets
Learn More
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings.
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations$1,350.00 -
8 Cylinder JE Custom Forged Piston Set - All Dish Top - with or without valve pockets
SKU: je-custom-8-dish8 Cylinder JE Custom Forged Piston Set - All Dish Top - with or without valve pockets
Learn More
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings.
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations$1,370.00 -
Peter Karvelas BMW S50 EURO Custom Set
SKU: Peter_Karvelas_S50EuroThis will be a variation on one of our Catalog parts....
6 Pistons with Pins, Locs and Rings.
Includes Skirt Coat at no charge
We will make to your requested Piston Diameter 86.365mm at gauge Point and Change to 10.8:1$1416 + $110 ( Very close estimate ) FedEx Shipping..
5-6 weeks like usual...( Could be faster )$1,384.72 -
8 Cylinder JE Custom Forged Piston Set - All Dome Top - with or without valve pockets
SKU: je-custom-8-dome8 Cylinder JE Custom Forged Piston Set - All Dome Top - with or without valve pockets
Learn More
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings.
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations$1,390.00 -
6 Cylinder JE Custom Forged Piston Set - M50, M52, M54 Normally Aspirated or Turbo Piston Set.
SKU: JETurbo_M50 Pistons6 Cylinder JE Custom Forged Piston Set -
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 4-5 weeks to make
Learn More$1,395.00 -
BMW M50 / S50 US Custom JE Piston Set. Any Bore, Stroke or Compression Ratio
SKU: BMWM50_Custom6 Cylinder JE Custom Forged Piston Set - All Dish Top - with or without valve pockets
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 5-6 weeks to make
Learn More$1,395.00 -
6 Cylinder JE Custom Forged Piston Set - All Dome Top - with valve pockets
SKU: JE_Custom_M306 Cylinder JE Custom Forged Piston Set - All Dome Top - with or without valve pockets
BMW M30 ALL Years and Variants. 2.5, 2.8, 3.0, 3.3, 3.4, 3.5ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations
Learn More$1,395.00 -
BMW M52 Custom 4032 OEM Spec 84.5mm with Skirt Coat.
SKU: M52_Custom4032BMW M52 Custom 4032 OEM Spec 84.5mm with Skirt Coat.
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal RingsPlease note: ALL JE Custom Pistons take 2.5-3 weeks to make + 1 week for any coating operations
Learn More$1,395.00 -
JE Forged Piston Set for Datsun L24-L28 Engines. Flat or Dish with Valve Pockets.
SKU: L24_L26_L28_JE-Pistons6 Cylinder JE Custom Forged Piston Set - Dish, Flat or Dome - with or without valve pockets
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons are currently 7-8 Week lead time to make
Learn More$1,395.00 -
BMW M52 6 Cylinder JE Custom Forged Piston Set -
SKU: JE_M52_Turbo6 Cylinder JE Custom Forged Piston Set -
M50, M52 and M54 N/A or Turbo Pistons.ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Learn More
Please note: ALL JE Custom Pistons take 8-10 Weeks lead time$1,395.00 -
6 Cylinder JE Custom Forged Piston Set - Nissan VG30 / VG33
SKU: JE_Nissan_VGCustom6 Cylinder JE Custom Forged Piston Set -
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 5-6 weeks to make
Learn More$1,395.00 -
6 Cylinder JE Custom Forged Piston Set - All "L" Series. L24, L26 and L28.
SKU: JE_L24L26L28_CustomAll Bore, Head and Stroke Combinations of L24, L26 or L28 with different Rod length and Stroke changes.
8:1 - 12:1ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 8-9 weeks to make
Learn More$1,395.00 -
6 Cylinder JE Custom Forged Piston Set - M50 / M52 / M54 Stroker N/A and Turbo
SKU: JE_BMW_M50_Stroker6 Cylinder JE Custom Forged Piston Set
Learn More
BMW M50, M52 and M54 and all Stroker Combinations.
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations$1,395.00 -
Toyota 3MZ-FE V6 Custom Piston Set.
SKU: JE_Custom_3MZ-FE6 Cylinder JE Custom Forged Piston Set for Toyota 3MZ-FE V6
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations
Learn More$1,395.00