JE CUSTOM MADE Forged Pistons
JE CUSTOM MADE Forged Pistons
Scroll down for all the JE Custom Piston order listings...
Forget the imitators and low price, low quality imposters. JE is the finest forged piston made for your Street or Race engine...Normally aspirated, Turbo, Supercharged, NOS..You name it and Top-End and JE can supply you a piston to fit your needs.
We are THE source for ALL BMW Forged pistons.
There are very few pistons that we cannot custom make for you either from our huge database of engine specifications or using a sample you provide to us.
The only things we DO NOT make are Diesel and 2 Stroke pistons.
Our Minimum bore diamter is 54.229mm with a .550 wrist pin for custom forged applications.
Here is a breif list of some of the custom applications we have made pistons for. These are in addition to the common engines listed on our main JE part # listing.
Audi 4,5 V6 and V8
Alfa most models 4, 5 Cyl 20V, and 6 cyl
BMW All Models 4,6,8 and 12 Cyl
Chevrolet and GM Imports as well as all Domestic V6 and V8 engine
Cosworth (Most engines and combinations)
Fiat (Most of the popular 4 cyl Turbo and N/A engines and the 5 Cylinder Turbo)
Ferrari 308, 365 GT 2+2, Etc.
Ford X-Flow
Lancia 2.0 16V
Maserati Misc
Mercedes 190E 2.3 16 and many 6 and 8 cylinders engines like the M119, etc (We usually require samples for Mercedes engines)
Nissan CA18DET, SR20, QR25, VG33, all RB's and all "L", "A", "R" and "U" series
Nissan Skyline GTR Pistons and Rods
Opel Calibra C20 Turbo and Normally aspirated
Peugeot 16V and Misc Turbo and Non-Turbo, 406, XU10, Etc
Porsche All AirCooled Flat 4 and Flat 6, Watercooled 924, 944, etc.
Renault Misc (We usually require samples for Renault engines)
Suzuki Swift Turbo and Cappucino, Alto Works F6A
Toyota 4EFTE, Vios, 3VZE, 3TC, Etc
Volvo B18 and B204, B23T, and 5 Cyl.
VW All Watercooled and Air Cooled
Click Here for the JE Pistons Custom Piston Quote Form
JE Pistons are the finest quality aftermarket forged pistons available. The special High Silicon 2618 aircraft alloy . allows much tighter Piston-To-Wall clearances ( Typically .0035-.0045 )than all the other manufactures. This means a quiet street engine that does not need excessive temperatures to seal.
We offer and optional ($40.00 per piston at the time they are ordered or $49 per piston after they have been completed) High Heat Coating on Piston tops and Skirts. (A MUST HAVE for all NOS and High Boost Turbo engines..)You must specify this when ordering. It usually adds 7-10 days to the delivery time of a piston set.
As one of JE's biggest distributors we have very good order time on all custom sets...Our orders get priority and that means you will get your parts faster....Typically a custom set from us takes 3-4 weeks and sometimes even faster....If your piston has to be made from a sample it may take a little longer....Rush and Expedited orders are available for those engine emergencies. There is an extra fee for Rush orders but sometimes you just need them faster....
Don't see what you need? We will build a custom set of pistons for any application. Just click here to send us a
-
Patrik and Geir BMW M52B25 Pistons
SKU: Patrik_M52_PistonsandRodsOkay...We have your piston all sorted out....I have a similar job I did for someone else that we can use the data from.
Max Dome Volume with valve pocket depths required per Geir will put you right at 12.5:1 with 34cc chambers
This will have Undercrown Milling and will have the best Strength to weight ratio.
Pin offset, Accumulator Grooves and 93 Series race pins. $1595.86
Learn More$1,595.86
Bryan Taylor Latest Lotus Set like older order
SKU: BTaylor_Pistons6-21Duplicate Lotus Set 06-21 Learn More$1,613.83
10 Cylinder JE Custom Forged Piston Set - All Flat Top - with or without valve pockets
SKU: je-custom-10-flat10 Cylinder JE Custom Forged Piston Set - All Flat Top - with or without valve pockets
Learn More
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings.
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations$1,662.50
Mercedes M276 Piston Set Re-Order
SKU: M276_JE_ReOrderDuplicate of previous Piston order Learn More$1,693.00
Victor Hagen Z Car Project
SKU: Victor_Hagen_Z$995 JE Forged Piston set with Pins, Locs and Rings
Learn More
$179 Regrind your Camshaft
$169 ARP Head studs
$64 ARP Rod Bolts
$12 Freeze Plug Set
$129 Rod and Main Bearing set Std or .25
$229 Dual Spring Set with Moly Retainers
$250 12 Pieces OEM Nissan Rockers. NOT the Chines Crap being sold online that pop off above 5500 RPM
$109 12 Piece Lash Pads kit to suit cam grind
-----------
$2136 + Shipping$1,710.00
TJ Ignite Z Car Package
SKU: TJ_Ignite_ZCar$995 JE Forged Piston set with Pins, Locs and Rings
Learn More
$179 Regrind your Camshaft
$169 ARP Head studs
$64 ARP Rod Bolts
$12 Freeze Plug Set
$129 Rod and Main Bearing set Std or .25
$229 Dual Spring Set with Moly Retainers
$250 12 Pieces OEM Nissan Rockers. NOT the Chines Crap being sold online that pop off above 5500 RPM
$109 12 Piece Lash Pads kit to suit cam grind
-----------
$2136 + Shipping$1,710.00
10 Cylinder JE Custom Forged Piston Set - All Dish Top - with or without valve pockets
SKU: je-custom-10-dish10 Cylinder JE Custom Forged Piston Set - All Dish Top - with or without valve pockets
Learn More
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings.
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations$1,712.50
10 Cylinder JE Custom Forged Piston Set - All Dome Top - with or without valve pockets
SKU: je-custom-10-dome10 Cylinder JE Custom Forged Piston Set - All Dome Top - with or without valve pockets
Learn More
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings.
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations$1,737.50
Jeff Mattson BBC Custom JE Set
SKU: je-custom-8-flatA custom set of 4.600" BBC Flat Top Pistons to your specs with .990 HD Pins, Pin Locs and a Nitrous Specific Ring Set is $1495 Delivered...
Learn More
5-6 week lead time...
2.5 week Rush order is an additional $300 if you are in a big hurry...
Single Valve Relief Flat Top with a Pin Height of 1.230 with .990 Pins$1,795.00
ALFA 2000 series 102 2000 (1958–1961)
SKU: JE_ALFA2000_1024 Cylinder Piston and Rod Set for the Series 102 1958-1961 ALFA 2000
A Great Solution for the Ridiculous Tall Domed Short Rod ALFA 2000 Engine...These are Sold as a set of 4 JE Forged pistons at 9.3:1 with a set of Long Pauter Forged 4340 Con Rods.
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Learn More
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations$1,795.00
Blake Stephens L20 Engine Project
SKU: Blake_L20Deposit Only to get Pistons and Rods underway with the balance and shipping when ready to ship.
Learn More
$875 JE 9.8:1 x 87mm Piston Set
$1250 Pauter Lightweight 4340 Con Rod Set with ARP2000 Bolts
$139 Big Bore Head Gasket
$128 Rod and Main Bearings
$154 ARP Head Studs
$160 44 x 35 Performance Valves
$179 Turbo Oil Pump
Other items to be considered and added as needed...
Re-Grind your camshaft.
Complete Timing Chain and Gear Set
Full Engine gasket and seal set
Valve Springs / Retainers$1,900.00
Miguel L28 Turbo Pistons and Rods
SKU: Miguel_L28_EngineJE Forged Piston Set
Learn More
88mm x 8.8:1 x 79mm L28 Stroke x 133mm Rods x .051 Cometic MLS
+ 133mm H-Beam Forged rods with ARP2000 Bolts.$1,994.00
12 Cylinder JE Custom Forged Piston Set - All Flat Top - with or without valve pockets
SKU: je-custom-12-flat12 Cylinder JE Custom Forged Piston Set - All Flat Top - with or without valve pockets
Learn More
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings.
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations$1,995.00Sale
BMW M10 Turbo Propane parts package
SKU: Jose_Sanchez_M10TurboPropane$695 Set of JE Forged Turbo Pistons 9.0:1 for Propane with 62cc Chamber and 89.5mm bore
+
$895 Set 144mm PAUTER Forged 4340 Con Rods with ARP2000 Bolts
Will use normal M10 Bearings
$109 for the set or Rods and Mains UnCoated
Add $65 for Coated Rod Bearings..
----------
$1764 US + Shipping + Other options and Add Ons.See below for other options, add On's etc.
Learn More
$155 Comeitc MLS Head Gasket .051-.070 thickness to compensate for milled head
$163 ARP Head Stud Set
$139 FULL Engine Gasket and Seal Set.$2,010.96
12 Cylinder JE Custom Forged Piston Set - All Dish Top - with or without valve pockets
SKU: je-custom-12-dish12 Cylinder JE Custom Forged Piston Set - All Dish Top - with or without valve pockets
Learn More
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings.
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations$2,055.00
12 Cylinder JE Custom Forged Piston Set - All Dome Top - with or without valve pockets
SKU: je-custom-12-dome12 Cylinder JE Custom Forged Piston Set - All Dome Top - with or without valve pockets
Learn More
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings.
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations$2,085.00
Viljam Lappi Finland L26 Engine package
SKU: Viljam_Lappi_L26$1350 Set of 6 with Pins, Locs and JE ProSeal rings.
Learn More
JE Forged pistons (83.5mm) with rings and Pins ( wanted CR Is 12:1 please try to get as close as possible.... valves Are open in TDC 4mm)
$149 Adjustable Cam Sprocket
$228 New valves 42/35
$252 New Rocker arms
$109 New retainers for valves (chromolysteel
$199 Timing Gear Set Complite ( +with adjustable cam spocket i dont need standart spocket)
$179 New main bearings to Crankshaft and connection rods (standart size)
$129 New FULL engine gasket kit
$339 Exhaust Header (1.5dia) 100% USA Made 14ga steel.
----------
$2934 USD + Shipping to be determined when packed.
-$749 USD ( Amount of customs docs to be paid separately )
---------
$2185 USD$2,185.00
BMW S62/S65 JE Custom Forged piston Set..LINERS ONLY. NOT ALUSIL
SKU: JE_BMW_S62-S65BMW S62 and S65 V8 Custom made to order Piston set.
Learn More
THESE ARE FOR USE WITH LINERS AND NOT ALUSIL BORES.
We also offer a set FOR use with ALUSIL which requires special Coatings and Rings..
8 Cylinder JE Custom Forged Piston Set
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations$2,195.00
Jukka Haapanen Custom JE Set + Molnar Rods
SKU: Jukka_HaapanenShipping to be sorted out when ready to ship....Estimated at $200 US
Learn More
8 x Pistons, Pins, Locs and Rings will be $1257 US
PH6600WUB8-A $691.37 for the Set.....$2,221.14
Mercedes M156 Forged Piston set for use in Alusil Bores
SKU: M156_Custom_Piston8 Cylinder Custom Forged Piston Set
Mercedes M156
Standard Bore with Alusil and Stock or Modified Compression
Learn More$2,395.00
Mercedes M274 JE Pistons and Pauter Rods. Piston Guided per OEM.
SKU: M274_MBZ_JE_PauterPistons, Pins, Locs, Rings, Tuff Skirt Coat and Pauter Forged 4340 Billet Rods with ARP2000 Bolts. Piston guided like OEM
Learn More
8-10 week lead time....$2,450.00
Michael Williams G4KH Pistons and Rods for Turbo Hyundai Project
SKU: G4KHBasic Set with Pins and locs $852.63
Learn More
Gapless Top RIngs $180
Ceramic Crown / Tuff Skirt Coat $190
Accumulator and Contact Reduction Grooves $48
Econo Undercrown Mill ( No need for 3D on this ) $100
$1370.63
$1149 Pauter Forged 4340 Con Rods with ARP2000 Bolts for 550 HP$2,519.63
Nic Cencic M20 Stroker Kit
SKU: Nic_Cencic_M20$1195 JE Piston Set Custom complete 85mm pistons with a 10.5:1 M52B28 Stroker
Learn More
$750 Molnar 135mm Rod Set with ARP2000 Bolts
$245 ARP Head Studs
$169 ARP Main Studs
$214 Cometic MLS .070 x 85mm bore$2,573.00
Ian Deering M10 Stroker Custom Parts.
SKU: Ian_Deering_M10Custom$935 JE 92mm bore 1.8i head x 10:1
$550 146mm Rods with ARP2000 Bolts.
**83mm S14 2.3 Crank**$165 +1mm SS Intake and Exhaust (47 x 39 ) Valves$189 Proper Street Dual Springs$369 NEW 304 Camshaft
$179 ARP Head Studs ( A MUST )$162 Cometic 92mm MLS Head Gasket$28 2 x 00 Pump Bleed ValvesLearn More
$22 4 x 155 Main Jets
$22 4 x 60F8 Idle Jets
$78 2 x 45 DCOE Repair Kits
----------
$2699$2,699.00
Derin Sagun BMW M54B30 engine parts.
SKU: Derin_Sagun_M54B30M54B30
- $1150 Piston 8.8;1 84,5 mm core size
- $318 Piston options: Offset wrist pins Tuff coated skirts FSR forgings
- $699 Piston rod
- $279 ARP Head Studs
Shipping will be sorted out when ready to go.
Pistons are 7-8 weeks...
We will sort out Low Value Customs Invoices when ready to ship.
$2,788.44
