JE CUSTOM MADE Forged Pistons
JE CUSTOM MADE Forged Pistons
Scroll down for all the JE Custom Piston order listings...
Forget the imitators and low price, low quality imposters. JE is the finest forged piston made for your Street or Race engine...Normally aspirated, Turbo, Supercharged, NOS..You name it and Top-End and JE can supply you a piston to fit your needs.
We are THE source for ALL BMW Forged pistons.
There are very few pistons that we cannot custom make for you either from our huge database of engine specifications or using a sample you provide to us.
The only things we DO NOT make are Diesel and 2 Stroke pistons.
Our Minimum bore diamter is 54.229mm with a .550 wrist pin for custom forged applications.
Here is a breif list of some of the custom applications we have made pistons for. These are in addition to the common engines listed on our main JE part # listing.
Audi 4,5 V6 and V8
Alfa most models 4, 5 Cyl 20V, and 6 cyl
BMW All Models 4,6,8 and 12 Cyl
Chevrolet and GM Imports as well as all Domestic V6 and V8 engine
Cosworth (Most engines and combinations)
Fiat (Most of the popular 4 cyl Turbo and N/A engines and the 5 Cylinder Turbo)
Ferrari 308, 365 GT 2+2, Etc.
Ford X-Flow
Lancia 2.0 16V
Maserati Misc
Mercedes 190E 2.3 16 and many 6 and 8 cylinders engines like the M119, etc (We usually require samples for Mercedes engines)
Nissan CA18DET, SR20, QR25, VG33, all RB's and all "L", "A", "R" and "U" series
Nissan Skyline GTR Pistons and Rods
Opel Calibra C20 Turbo and Normally aspirated
Peugeot 16V and Misc Turbo and Non-Turbo, 406, XU10, Etc
Porsche All AirCooled Flat 4 and Flat 6, Watercooled 924, 944, etc.
Renault Misc (We usually require samples for Renault engines)
Suzuki Swift Turbo and Cappucino, Alto Works F6A
Toyota 4EFTE, Vios, 3VZE, 3TC, Etc
Volvo B18 and B204, B23T, and 5 Cyl.
VW All Watercooled and Air Cooled
Click Here for the JE Pistons Custom Piston Quote Form
JE Pistons are the finest quality aftermarket forged pistons available. The special High Silicon 2618 aircraft alloy . allows much tighter Piston-To-Wall clearances ( Typically .0035-.0045 )than all the other manufactures. This means a quiet street engine that does not need excessive temperatures to seal.
We offer and optional ($40.00 per piston at the time they are ordered or $49 per piston after they have been completed) High Heat Coating on Piston tops and Skirts. (A MUST HAVE for all NOS and High Boost Turbo engines..)You must specify this when ordering. It usually adds 7-10 days to the delivery time of a piston set.
As one of JE's biggest distributors we have very good order time on all custom sets...Our orders get priority and that means you will get your parts faster....Typically a custom set from us takes 3-4 weeks and sometimes even faster....If your piston has to be made from a sample it may take a little longer....Rush and Expedited orders are available for those engine emergencies. There is an extra fee for Rush orders but sometimes you just need them faster....
Don't see what you need? We will build a custom set of pistons for any application. Just click here to send us a
-
6 Cylinder JE Custom Forged Piston Set -BMW S50 / S52 US and Euro Turbo. Flat Top or Dish Only. + $60 for Domed pistons
SKU: JE_BMW_S50-S52_Custom6 Cylinder JE Custom Forged Piston Set -
S50 / S52 US and Euro Turbo or N/A Flat Top or Dish Only.ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations
Learn More$1,395.00 -
Toyota 3VZE Custom Forged Pistons for N/A, Turbo and NOS
SKU: JE_3VZE_Custom6 Cylinder JE Custom Forged Piston Set -
Learn More
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations$1,395.00 -
JE 2618 Custom Forged Piston Set. Datsun L24-L26-L28 Turbo or N/A. Flat or Dish . With or Without Valve Pockets. SEE OTHER LISTINGS FOR DOMED PISTONS.
SKU: je-custom-l24_L26_L286 Cylinder JE Custom Forged Piston Set - All Flat or Dish Top - with or without valve pockets
Learn More
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 7-8 weeks to make + 1 week for any coating operations$1,395.00 -
JE 2618 Custom Forged Piston Set. Datsun L24-L26-L28 High Compression Domed Pistons with Valve Pockets. SEE OTHER LISTINGS FOR DISHED OR FLAT TOP PISTONS.
SKU: je-custom-l24-l26-l28_Domed6 Cylinder JE Custom Forged Piston Set - High Compression Domed Pistons with Valve Pockets. SEE OTHER LISTINGS FOR DISHED OR FLAT TOP PISTONS.
Learn More
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons have a lead time of 8-9 weeks$1,395.00 -
ALFA Romeo V6 Custom Piston Set.
SKU: JE_Alfa_V66 Cylinder JE Custom Forged Piston Set for All ALFA V6 Engines
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations
Learn More$1,395.00 -
BMW N54 Turbo 6 Cylinder JE Custom Forged Piston Set -
SKU: JE_N54CustomBMW N54B30 Custom Piston Set ...Any Bore or Compression Ratio
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations
Learn More$1,395.00 -
Albero Guirola BMW M30 3.3 Engine pieces per Samples. 91.0mm x 9.6:1 Pistons....
SKU: AlbertoG_M30336 Cylinder JE Custom Forged Piston Set - All Dome Top - with or without valve pockets
Learn More
BMW M30 ALL Years and Variants. 2.5, 2.8, 3.0, 3.3, 3.4, 3.5
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations$1,395.00 -
Toyota 1MZ-FE V6 Custom Piston Set.
SKU: JE_1MZFE__Custom6 Cylinder JE Custom Forged Piston Set for Toyota 1MZ-FE V6
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations
Learn More$1,395.00 -
JE 2618 Custom Forged Piston Set. Datsun L28 Stroker Flat Top No VR's
SKU: JE_RussellNZ_L286 Cylinder JE Custom Forged Piston Set - All Flat or Dish Top - with or without valve pockets
Learn More
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations$1,395.00 -
6 Cylinder JE Custom Forged Piston Set - M30 ALL 2.5,2.8,3.0,3.3,3.5
SKU: JE_M30_Custom6 Cylinder JE Custom Forged Piston Set - All Dome,with valve pockets
ALL M30 Engine N/A and TurboALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 6-8 weeks to make
Learn More$1,395.00 -
JE 2618 Custom Forged Piston Set. Datsun L24-FLAT TOP with VR's
SKU: Andy_Hvass_240Z PistonsCustom L24 Flat Top Piston Set complete per your Spec sheet sent via email...
Learn More$1,395.00 -
6 Cylinder JE Custom Forged Piston Set - BMW M54 Turbo or Supercharged
SKU: JE_M54_Custom_SC6 Cylinder JE Custom Forged Piston Set -
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations
Learn More$1,395.00 -
6 Cylinder JE Custom Forged Piston Set - M50, M52, M54 Normally Aspirated Piston Set.
SKU: JE_BMW_M54_ Custom6 Cylinder JE Custom Forged Piston Set -
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 10-12 weeks to make
Learn More$1,395.00 -
ACURA NSX JE Forged Piston Set. Custom Made to order.
SKU: Acura_NSX_V66 Cylinder JE Custom Forged Piston Set -
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations
Learn More$1,395.00 -
Rob Clark M10 project
SKU: Robert_Clark_M10Piston Set: 89.5mm + E21 Head + 9.5:1
Learn More
$169 Cam Regrind
$76 O/S Eccentrics
$279 Shorty M10 header$1,419.00 -
KEMAL S50 Euro Piston Set + ARP
SKU: Kemal_S50Euro_PackageCustom BMW S50 EURO Piston Set
Learn More
S50 eur head stud
+
84mm custom bore s50b30 eur 9 comp piston
$1150 + $279 + Shipping to be sorted when ready to ship.$1,429.00 -
BMW M20B25 / B27 6 Cylinder JE Custom TURBO Forged Piston Set -
SKU: M20_TurboCustom_Pistons6 Cylinder JE Custom Forged Piston Set - M20 TURBO APPLICATIONS
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 6-8 weeks to produce
Learn More$1,437.45 -
Steven Re-Make of 816897 for 1000 HP
SKU: Steven_816897Re-Make of 81689784.5mm or 85mm bore change.
8.0-8.5:1 You specify and I will do....
93 Series upgraded Pins for 1000 HP
TuffSkirt Coating
Contact Reduction and Accumulator Grooves..
Learn More$1,441.99 -
6 Cylinder JE Custom Forged Piston Set - M20B25 and Strokers.
SKU: je-custom-6-dome6 Cylinder JE Custom Forged Piston Set - All Dome,with valve pockets
M20B25 and strokersALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations
Learn More$1,450.00 -
BMW M20B27 ETA 6 Cylinder JE Custom Forged Piston Set -
SKU: JE_M20Dome6 Cylinder JE Custom Forged Piston Set - M20 ETA
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 6-8 weeks + shipping time.
Learn More$1,450.00 -
BMW M20 OEM 885 Head Piston Crown Set SPEC Class 9.3:1 Any Bore
SKU: M20_OEMCrown_CustomBMW M20 OEM 885 Head Piston Crown Set
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations
Learn More$1,450.00 -
BMW M20B20 and M20B23 JE Piston Set
SKU: BMW_JE_M20B20_M20B236 Cylinder JE Custom Forged Piston Set - M20 High Compression or Turbo
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 6-8 weeks to make
Learn More$1,450.00 -
BMW M20 OEM Crown Stroker / Long Rod Custom Pistons set.
SKU: M20_Stroker_OEMCrown6 Cylinder JE Custom Forged Piston Set - M20 OEM Crown with Stroker or Long / Short Rods
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 8-9 weeks to make at this time
Learn More$1,450.00 -
6 Cylinder JE Custom Forged Piston Set - All Dome Top - with valve pockets
SKU: JE_Custom_M306 Cylinder JE Custom Forged Piston Set - All Dome Top - with or without valve pockets
BMW M30 ALL Years and Variants. 2.5, 2.8, 3.0, 3.3, 3.4, 3.5ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations
Learn More$1,450.00 -
BMW M20B25 6 Cylinder JE Custom Forged Piston Set - 84.5mm x 9.3:1
SKU: M20B25_9.3_84.5BMW M20B25 6 Cylinder JE Custom Forged Piston Set - 84.5mm x 9.3:1
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
$1,450.00