JE CUSTOM MADE Forged Pistons

Rods: $2899  + $35 shipping  CP-Carrillo Connecting Rod Set, BMW N63/S63 Pro-Xtreme

Pistons:  $2795  8 Custom S63B44 Sleeved block JE 2618 Pistons with Pins, Locs and JE ProSeal Rings with Tuff Skirt Coat and Ceramic Crown Coatings for use to 1500HP to NY

8 Cylinder Custom Forged Piston Set
Mercedes M156
Standard Bore with Alusil and Stock Compression
With Pauter 4340 Rod Set

BMW E30 M20B25 Part Number JE - 63717-845, 84.5mm (0.50mm/020” oversize) 9.7:1

ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings

We can make proper 885 head style pistons 84.5 x 11:1
$1395 set of 6 with Pins, Locs and Rings...6-7 week order time...
6 x 84.5mm pistons 11:1 compression  81mm 2.7 stroke x 130mm Rods.
Block height after .003 deck = 8.108 / 2.059 which is Perfect    Head cc = 40cc
$78     Rod bearing set Standard
$139   main bearing set Standard
$157   ARP hardware for mains
$189   ARP hardware for Stock Rods
$24.26    6x 42mm intake valves. Later
$21.74  6x 36mm exhaust valves Later
$550   valve springs with retainers/keepers.12 x Dual Performance Springs + Titanium Retainer set. Direct replacement.
$00     valve seats  MACHINIST SUPPLIES SEATS
$24     Set of 12 Valve Stem seals,
$102   Set of 12 valve guides.
$35      each  x 12 rocker arms with new eccentrics. Hardened.
$253    ARP head studs or bolts
$395   NEW 284 cam for 885 head

Pistons:
Basic set with all your Requested Options and Gapless Top Ring Set
$1209
With Buttons add $80   I would prefer buttons.. Add the buttons in J
So still the exact same price as the $2015 Quote… That’s pretty impressive that the price has remained the same so long!

Rods
$195 Per Rod. Thanks, Please put 8 of these on the order.

Bearings:
$60 Per Set of 4 rods to Drill them here…
ACL 4B8036H-STD Bearings are $53.20 per 4 Cyl Rod Set This is a pretty comparable price to what I would pay here so I think it would be best for me to included these in this order. Please include 2x drilled sets
-------------
$3075.40 US + Shipping TBD after packing.

2 x Sets JE Pistons + 3 Sets of Rods.
1 x Remake of S14B25 Long Rod
1 x Remake 89.2mm M10
2 x BMW S14B23 144mm Con Rods
1 x BMW S14 149.7mm Con Rods with ARP 625 Custom Age Bolts

$1095 1 x Custom JE PIston Set 10.0:1 84.5mm  
$219   1x ARP Head studs
$170   1x ARP Main Studs
$162   1x Gasket set ( Full engine Gasket and Seal Set ? )   Full set
$218   1x Head Gasket ( Cometic MLS Head gasket is the correct choise with the ARP 
$350   $175 x 2  2x Oil Pump ( You meant 2 Oil Pumps correct ? )  Yes correct
$98     1x Rocker Shafts Pair.
$229   1x Vernier Pulley ( Adjustable Cam Gear ? ) Yes
$59     1x Exhaust stud  Nuts set + 1x Intake stud nuts set
$50     1x windage tray
-------
$2650 US

+ Shipping of course...Needs to be boxed and weighed before we can get final cost...Likely in the $200 to low $200 range...
Low Value Invoices for customs upon request...Below $1000 AUD with Freight...

 M54B30 

• $1150  Piston 8.8;1 84,5 mm core size
• $318    Piston options: Offset wrist pins   Tuff coated skirts   FSR forgings
• $699    Piston rod
• $279   ARP Head Studs 
  Shipping will be sorted out when ready to go. 
  Pistons are 7-8 weeks...
  We will sort out Low Value Customs Invoices when ready to ship. 

$1195  JE Piston Set Custom complete 85mm pistons with a 10.5:1 M52B28 Stroker
$750    Molnar 135mm Rod Set with ARP2000 Bolts
$245    ARP Head Studs
$169    ARP Main Studs
$214    Cometic MLS .070 x 85mm bore

Basic Set with Pins and locs $852.63
Gapless Top RIngs $180
Ceramic Crown / Tuff Skirt Coat $190
Accumulator and Contact Reduction Grooves $48
Econo Undercrown Mill ( No need for 3D on this ) $100
$1370.63 

$1149  Pauter Forged 4340 Con Rods with ARP2000 Bolts for 550 HP

Pistons, Pins, Locs, Rings, Tuff Skirt Coat and Pauter Forged 4340 Billet Rods with ARP2000 Bolts. Piston guided like OEM

8-10 week lead time....

8 Cylinder Custom Forged Piston Set
Mercedes M156
Standard Bore with Alusil and Stock or Modified Compression

Shipping to be sorted out when ready to ship....Estimated at $200 US
8 x Pistons, Pins, Locs and Rings will be $1257 US
PH6600WUB8-A $691.37 for the Set.....

BMW S62 and S65 V8 Custom made to order Piston set.
THESE ARE FOR USE WITH LINERS AND NOT ALUSIL BORES.
We also offer a set FOR use with ALUSIL which requires special Coatings and Rings..
8 Cylinder JE Custom Forged Piston Set 
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations

$1350 Set of 6 with Pins, Locs and JE ProSeal rings. 
JE Forged pistons (83.5mm) with rings and Pins ( wanted CR Is 12:1 please try to get as close as possible.... valves Are open in TDC 4mm)
$149  Adjustable Cam Sprocket
$228  New valves 42/35
$252  New Rocker arms 
$109  New retainers for valves (chromolysteel
$199 Timing Gear Set Complite ( +with adjustable cam spocket i dont need standart spocket)
$179  New main bearings to Crankshaft and connection rods (standart size)
$129  New FULL engine gasket kit 
$339  Exhaust Header (1.5dia) 100% USA Made 14ga steel. 
----------
$2934 USD + Shipping to be determined when packed.
-$749 USD ( Amount of customs docs to be paid separately ) 
---------
$2185 USD

12 Cylinder JE Custom Forged Piston Set - All Dome Top - with or without valve pockets
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings.
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations

12 Cylinder JE Custom Forged Piston Set - All Dish Top - with or without valve pockets
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings.
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations

$695     Set of JE Forged Turbo Pistons 9.0:1 for Propane with 62cc Chamber and 89.5mm bore
+
$895     Set 144mm PAUTER Forged 4340 Con Rods with ARP2000 Bolts
Will use normal M10 Bearings
$109 for the set or Rods and Mains UnCoated
Add $65 for Coated Rod Bearings..
----------
$1764 US + Shipping + Other options and Add Ons. 

See below for other options, add On's etc. 
$155    Comeitc MLS Head Gasket .051-.070 thickness to compensate for milled head
$163    ARP Head Stud Set
$139    FULL Engine Gasket and Seal Set.

12 Cylinder JE Custom Forged Piston Set - All Flat Top - with or without valve pockets
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings.
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations

JE Forged Piston Set
88mm x 8.8:1 x 79mm L28 Stroke x 133mm Rods x .051 Cometic MLS
+ 133mm H-Beam Forged rods with ARP2000 Bolts.

Deposit Only to get Pistons and Rods underway with the balance and shipping when ready to ship.
$875     JE 9.8:1 x 87mm Piston Set
$1250   Pauter Lightweight 4340 Con Rod Set with ARP2000 Bolts
$139     Big Bore Head Gasket
$128     Rod and Main Bearings
$154     ARP Head Studs
$160     44 x 35 Performance Valves
$179     Turbo Oil Pump
Other items to be considered and added as needed...
Re-Grind your camshaft.
Complete Timing Chain and Gear Set
Full Engine gasket and seal set
Valve Springs / Retainers