M42 , M44
-
JE 2618 Custom Forged Piston Set. Datsun L28 Stroker Flat Top No VR's
SKU: JE_RussellNZ_L286 Cylinder JE Custom Forged Piston Set - All Flat or Dish Top - with or without valve pockets
Learn More
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations$1,395.00 -
JE 2618 Custom Forged Piston Set. Datsun L24-L26-L28 High Compression Domed Pistons with Valve Pockets. SEE OTHER LISTINGS FOR DISHED OR FLAT TOP PISTONS.
SKU: je-custom-l24-l26-l28_Domed6 Cylinder JE Custom Forged Piston Set - High Compression Domed Pistons with Valve Pockets. SEE OTHER LISTINGS FOR DISHED OR FLAT TOP PISTONS.
Learn More
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons have a lead time of 8-9 weeks$1,395.00 -
JE 2618 Custom Forged Piston Set. Datsun L24-L26-L28 Turbo or N/A. Flat or Dish . With or Without Valve Pockets. SEE OTHER LISTINGS FOR DOMED PISTONS.
SKU: je-custom-l24_L26_L286 Cylinder JE Custom Forged Piston Set - All Flat or Dish Top - with or without valve pockets
Learn More
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 7-8 weeks to make + 1 week for any coating operations$1,395.00 -
Jussi BMW S14 Custom Stroker Pistons.
SKU: JUSSI_S14_JEPistonsWe aim about 320hp / 8800 rpm.
Learn More
Asymmetric FSR Forging which will give us the best weight to strength ratio...
Gapless Top Rings
Undercrown Milling, Double Pin Oilers, Skirt Coating, Contact Reduction and Accumulator Grooves$1,284.62 -
Jussi M42 Turbo Piston order
SKU: Jussi_M42PistonsSet of 4 Turbo M42's with HD 93 Series Pins, Tuff Skirt Coat, JE Rings and Turbo Forgings
$1115 US + Shipping...( Likely in the $60-$70 range )
Low Value customs docs upon request.$1,115.00 -
Blake Stephens L20 Engine Project
SKU: Blake_L20Deposit Only to get Pistons and Rods underway with the balance and shipping when ready to ship.
Learn More
$875 JE 9.8:1 x 87mm Piston Set
$1250 Pauter Lightweight 4340 Con Rod Set with ARP2000 Bolts
$139 Big Bore Head Gasket
$128 Rod and Main Bearings
$154 ARP Head Studs
$160 44 x 35 Performance Valves
$179 Turbo Oil Pump
Other items to be considered and added as needed...
Re-Grind your camshaft.
Complete Timing Chain and Gear Set
Full Engine gasket and seal set
Valve Springs / Retainers$1,900.00 -
Lars Rasch Z engine parts
SKU: Lars_Rasch_Z$1050 Piston set at 8.5 or 8.8:1 is ideal...8.0 is a bit low...
Learn More
I recommend you do Skirt Coating, Contact Reduction and Accumulator grooves...
See below for options and other pieces...
$699 Forged 4340 133mm Rods with ARP2000 Bolts.
$169 ARP head Studs
$179 Cometic 87mm Bore 1.2mm Head gasket
$119 Turbo oil Pump$1,197.00 -
CUSTOM M42 Valve Train Kit
SKU: Igor_CATuned_M42Head8 x INCONEL Exhaust
Learn More
8 x SS Intakes
16 x Guides
32 x Keepers
1 x Complete Spring and Ti retainer set
$1250$1,345.00 -
TJ Ignite Z Car Package
SKU: TJ_Ignite_ZCar$995 JE Forged Piston set with Pins, Locs and Rings
Learn More
$179 Regrind your Camshaft
$169 ARP Head studs
$64 ARP Rod Bolts
$12 Freeze Plug Set
$129 Rod and Main Bearing set Std or .25
$229 Dual Spring Set with Moly Retainers
$250 12 Pieces OEM Nissan Rockers. NOT the Chines Crap being sold online that pop off above 5500 RPM
$109 12 Piece Lash Pads kit to suit cam grind
-----------
$2136 + Shipping$1,710.00 -
Victor Hagen Z Car Project
SKU: Victor_Hagen_Z$995 JE Forged Piston set with Pins, Locs and Rings
Learn More
$179 Regrind your Camshaft
$169 ARP Head studs
$64 ARP Rod Bolts
$12 Freeze Plug Set
$129 Rod and Main Bearing set Std or .25
$229 Dual Spring Set with Moly Retainers
$250 12 Pieces OEM Nissan Rockers. NOT the Chines Crap being sold online that pop off above 5500 RPM
$109 12 Piece Lash Pads kit to suit cam grind
-----------
$2136 + Shipping$1,710.00 -
JE 2618 Custom Forged Piston Set. Datsun L24-FLAT TOP with VR's
SKU: Andy_Hvass_240Z PistonsCustom L24 Flat Top Piston Set complete per your Spec sheet sent via email...
Learn More$1,395.00 -
JE Custom L20B with KA24DE Head
SKU: JE_Custom_L20BL20b block z20..rods being 6mm longer with a KA24de front wheel drive head .i want reliability so only want 88mm. Learn More$1,095.00 -
Teo Barchetta Custom Piston Set
SKU: TEO_Barchetta_PistonsThe Pistons will be made to suit your Pauter rods...
20mm Pin x .860 Wide Small End x 145mm lengthSet of 4 Custom Pistons in 82mm Standard Bore
Raise compression to 10.5
Asymmetric 2618 Forging
Pin Offset
Pins, Locs and JE ProSeal Rings
Skirt Coating$897 US + $75 Shipping....Learn More
Customs Invoice for whatever amount you want....$1,108.08 -
Conny Lindroos Custom JE Re-Order
SKU: JE_Custom_ConnyJE Custom Forged Piston Set - All Dome Top - SHIPPING WILL BE CHARGED AFTER PACKED AND WEIGHED
9 pistons,
bore 3,209
Comp height 1,413.
Forign 81M.
Pin dia .905
pin length 2,250. JE ,073 wire locks. (HD pin)
The pistons should also be Flat Top.
Same Valve Pockets and noches as this older job.
With JE Pro Seal Rings
$1671.80 + $207 For Tuff Skirt Coating ( Was on last job )My address is:
Learn More
Conny Lindroos
Heinäkuja 1
21380 Aura Finland
+358 400828519$1,878.80 -
Nils S14B20 JE Pistons and Thick MLS Head Gasket
SKU: Nils_S14B20Then we'll go for this;94mm bore and 11.8 comp.72.6mm stroke and 149.7mm rods.He also wants one of those thick MLS gaskets to come with it.Learn More
$935 + $195 + Shipping$1,130.00 -
Jan Erik Fostad Cosworth Pistons, Rods and Shipping to Norway
SKU: Jan_Erik_FostadPiston set $795 Pistons, Pins, Locs and Rings....
Learn More
Bore Change to 90.8mm, Valve pocket change....
Pauter Rod Set $987 with ARP2000 Bolts.
$109 FedEx Shipping
* 90.8mm instead of 91.6mm ?
* Same Pin Height for use with same stroke and rod length
* Valve Pockets same diameter and location just not quite as deep
* Same Crown and compression ratio as old job$1,891.00