M30
-
Longlom Thailand Z Car Parts Package
SKU: Z_Custom_EngineKit1. Compression ratio is 11:1 or 10.75,I will play around with custom head gasket. We have ron95 here.2. The head is N423. Expected HP should be close to 300hp at flywheel.
4. Camshaft is Tomei 290’ with 8.80mm camlift.Delivery address is :
Ms Supatra Eamporn
2/289 Anusaowareechai Condo, Phaholyothin Road Soi 2/1, Samsennai, Phayathai, Bangkok 10400
Tel +66894453584 or +66818332768> Large Tube 1.625" Race Header for High Compression 3.0+
$399
> 1. A set of DOMED JE pistons 88mm with coating skirt and valve pockets.
$1050 + $138 Skirt Coat depending on Dome, Dish, Flat, etc.
That is a set of 6 Forged JE Pistons with Pins, Locs and JE Pro-Seal Rings.
> 2. A set of Conrod for using with LD28 crankshaft.
No problem 133mm H-Beam Rods with ARP2000 Bolts
$650
> 3. A set of racing valve largest possible 46mm inlet or larger. !
46mm Intake and 38mm Exhaust
$250 Set of 12
> 4. A set of valve spring
with Matching Moly Steel Retainers. No Titanium
$ 215 for the full set...
> 5. A set of valve guide ,silicone bronze if possible.
$9.50 each = $114
----------
$2816
$345
----------
$3161 USLearn More$3,161.00 -
Andrejs New Order for BMW M62B44 BALANCE DUE WITH SHIPPING.
SKU: andrejs_M62B44_DepositDeposit $2100
Learn More
--------------------
$269 FedEx Shipping
$345 ARP S65 HSK
$395 RACEWARE MSK
$1695 V8 H-Beam ROD SET with ARP2000 Bolts.
$2465 V8 JE PISTON SET
$119 KING RACING BEARINGS
$279 6 Top 1.2mm Rings Only
-------------------
$3467 Due
M62 piston set CR 9.5:1 90mm final bore
Lateral grooves
Piston skirts coated
Large valve relieves
Stock stroke 82.7mm
HD pins Max light weight, Supercharged boost design
+
Forged 4340 H-Beam Rods with ARP2000 Bolts.$3,467.00 -
Kamil Dymon BMW M20 Engine Project per emails.
SKU: Kamil_M20ProjectWe can make proper 885 head style pistons 84.5 x 11:1
Learn More
$1395 set of 6 with Pins, Locs and Rings...6-7 week order time...
6 x 84.5mm pistons 11:1 compression 81mm 2.7 stroke x 130mm Rods.
Block height after .003 deck = 8.108 / 2.059 which is Perfect Head cc = 40cc
$78 Rod bearing set Standard
$139 main bearing set Standard
$157 ARP hardware for mains
$189 ARP hardware for Stock Rods
$24.26 6x 42mm intake valves. Later
$21.74 6x 36mm exhaust valves Later
$550 valve springs with retainers/keepers.12 x Dual Performance Springs + Titanium Retainer set. Direct replacement.
$00 valve seats MACHINIST SUPPLIES SEATS
$24 Set of 12 Valve Stem seals,
$102 Set of 12 valve guides.
$35 each x 12 rocker arms with new eccentrics. Hardened.
$253 ARP head studs or bolts
$395 NEW 284 cam for 885 head$3,978.00