M20
We offer JE Forged Pistons for every possible combination of BMW M20 engines.
All Bores, Strokes, Compression Ratios and Styles. We offer THE Definitive OEM 885 Head Crown Forged Piston.
This is used in Spec Class Cars around the World as well as anyone that wants the OEM Offset Dish Dome Piston.
The OEM Crown piston is offered in 8.8:1 9.3:1 and 9.7:1
On Stroker engines we can get higher compressions with this same crown.
We have prints for every Compression Ratio and Rod Crank Combo that is out there...Low Compression Turbo to 14:1 N/A Pistons
-
Jacob M20 Turbo order...
SKU: Jacob_M20TurboSet of 6 JE Turbo M20 Pistons, Pins, Locs and ProSeal Rings $1395
4-6 weeks....The sooner you start these the better...The Holidays will cause a delay of almost 2 weeks...
New Turbo Specific Camshaft $399
Dual Turbo Valve Springs with Titanium Retainers $575
12 x HD Rocker Arms $375
Shipping will not be exact until packaged and weighed but will be right about $150 for this order....$2,894.00 -
M20 High Compression M20 Piston Set Custom
SKU: JE_M20_HighCompression_CustomALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings:
Learn More$1,450.00 -
BMW E30 M20B25 Part Number JE - 63717-845, 85.00mm (1.00mm/.040” oversize) 9.7:1
SKU: M20_Spec_OZ_NZ_85mmBMW E30 M20B25 Part Number JE - 63717-850, 85.00mm (1.00mm/.040” oversize) 9.7:11
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
$1,450.00 -
Jukka Haapanen Custom JE Set + Molnar Rods
SKU: Jukka_HaapanenShipping to be sorted out when ready to ship....Estimated at $200 US
Learn More
8 x Pistons, Pins, Locs and Rings will be $1257 US
PH6600WUB8-A $691.37 for the Set.....$2,221.14 -
Michael M20B25 Road Race engine package.
SKU: Michael_OZ_M20$1095 1 x Custom JE PIston Set 10.0:1 84.5mm
$219 1x ARP Head studs
$170 1x ARP Main Studs
$162 1x Gasket set ( Full engine Gasket and Seal Set ? ) Full set
$218 1x Head Gasket ( Cometic MLS Head gasket is the correct choise with the ARP
$350 $175 x 2 2x Oil Pump ( You meant 2 Oil Pumps correct ? ) Yes correct
$98 1x Rocker Shafts Pair.
$229 1x Vernier Pulley ( Adjustable Cam Gear ? ) Yes
$59 1x Exhaust stud Nuts set + 1x Intake stud nuts set
$50 1x windage tray
-------
$2650 US+ Shipping of course...Needs to be boxed and weighed before we can get final cost...Likely in the $200 to low $200 range...
Learn More
Low Value Invoices for customs upon request...Below $1000 AUD with Freight...$3,021.00 -
Derin Sagun BMW M54B30 engine parts.
SKU: Derin_Sagun_M54B30M54B30
- $1150 Piston 8.8;1 84,5 mm core size
- $318 Piston options: Offset wrist pins Tuff coated skirts FSR forgings
- $699 Piston rod
- $279 ARP Head Studs
Shipping will be sorted out when ready to go.
Pistons are 7-8 weeks...
We will sort out Low Value Customs Invoices when ready to ship.
$2,788.44 -
Nic Cencic M20 Stroker Kit
SKU: Nic_Cencic_M20$1195 JE Piston Set Custom complete 85mm pistons with a 10.5:1 M52B28 Stroker
Learn More
$750 Molnar 135mm Rod Set with ARP2000 Bolts
$245 ARP Head Studs
$169 ARP Main Studs
$214 Cometic MLS .070 x 85mm bore$2,573.00 -
BMW M20 High Compression and Stroker Piston Set. OEM Crown to 10.5:1 or TEP Dome for 11:1+ CR
SKU: JE_M20_HighComp6 Cylinder JE Custom Forged Piston Set - All Dome Top
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 4-6 weeks to make + Shipping time
Learn More$1,450.00 -
BMW E30 M20B25 Part Number JE - 63717-845, 84.5mm (0.50mm/020” oversize) 9.7:1
SKU: Graeme_SpedM20_4SetsBMW E30 M20B25 Part Number JE - 63717-845, 84.5mm (0.50mm/020” oversize) 9.7:1
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
$4,309.20 -
JE Custom Pistons for BMW S55 / N55 Turbo
SKU: BMW_S55_JEPistons6 Cylinder JE Custom Forged Piston Set -
BMW S55 and N55 Turbo Inline 6ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations
Learn More$1,495.00 -
BMW E30 M20B25 Part Number JE - 63717-845, 84.5mm (0.50mm/020” oversize) 9.7:1
SKU: M20_Spec_OZ_NZBMW E30 M20B25 Part Number JE - 63717-845, 84.5mm (0.50mm/020” oversize) 9.7:1
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
$1,450.00 -
BMW M20 OEM 885 Head Piston Crown Set SPEC Class 9.3:1 Any Bore
SKU: M20_OEMCrown_CustomBMW M20 OEM 885 Head Piston Crown Set
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations
Learn More$1,450.00 -
6 Cylinder JE Custom Forged Piston Set - M20B25 and Strokers.
SKU: je-custom-6-dome6 Cylinder JE Custom Forged Piston Set - All Dome,with valve pockets
M20B25 and strokersALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations
Learn More$1,450.00 -
BMW M20B20 and M20B23 JE Piston Set
SKU: BMW_JE_M20B20_M20B236 Cylinder JE Custom Forged Piston Set - M20 High Compression or Turbo
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 6-8 weeks to make
Learn More$1,450.00 -
BMW M20 OEM Crown Stroker / Long Rod Custom Pistons set.
SKU: M20_Stroker_OEMCrown6 Cylinder JE Custom Forged Piston Set - M20 OEM Crown with Stroker or Long / Short Rods
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 8-9 weeks to make at this time
Learn More$1,450.00 -
6 Cylinder JE Custom Forged Piston Set - All Dome Top - with valve pockets
SKU: JE_Custom_M306 Cylinder JE Custom Forged Piston Set - All Dome Top - with or without valve pockets
BMW M30 ALL Years and Variants. 2.5, 2.8, 3.0, 3.3, 3.4, 3.5ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations
Learn More$1,450.00 -
BMW M20B25 6 Cylinder JE Custom Forged Piston Set - 84.5mm x 9.3:1
SKU: M20B25_9.3_84.5BMW M20B25 6 Cylinder JE Custom Forged Piston Set - 84.5mm x 9.3:1
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
$1,450.00 -
M20 Stroker pistons that will suit - a 2.7 crank, 10.5/1 compression, 135mm rod and 0.5 oversized. 731 Head !!!!
SKU: M20B25_Forged_KitM20 Stroker pistons that will suit - a 2.7 crank, 10.5/1 compression, 135mm rod and 0.5 oversized
Learn More
731 Head !!!!$1,450.00 -
Kamil Dymon BMW M20 Engine Project per emails.
SKU: Kamil_M20ProjectWe can make proper 885 head style pistons 84.5 x 11:1
Learn More
$1395 set of 6 with Pins, Locs and Rings...6-7 week order time...
6 x 84.5mm pistons 11:1 compression 81mm 2.7 stroke x 130mm Rods.
Block height after .003 deck = 8.108 / 2.059 which is Perfect Head cc = 40cc
$78 Rod bearing set Standard
$139 main bearing set Standard
$157 ARP hardware for mains
$189 ARP hardware for Stock Rods
$24.26 6x 42mm intake valves. Later
$21.74 6x 36mm exhaust valves Later
$550 valve springs with retainers/keepers.12 x Dual Performance Springs + Titanium Retainer set. Direct replacement.
$00 valve seats MACHINIST SUPPLIES SEATS
$24 Set of 12 Valve Stem seals,
$102 Set of 12 valve guides.
$35 each x 12 rocker arms with new eccentrics. Hardened.
$253 ARP head studs or bolts
$395 NEW 284 cam for 885 head$3,978.00 -
Patrik and Geir BMW M52B25 Pistons
SKU: Patrik_M52_PistonsandRodsOkay...We have your piston all sorted out....I have a similar job I did for someone else that we can use the data from.
Max Dome Volume with valve pocket depths required per Geir will put you right at 12.5:1 with 34cc chambers
This will have Undercrown Milling and will have the best Strength to weight ratio.
Pin offset, Accumulator Grooves and 93 Series race pins. $1595.86
Learn More$1,595.86