BMW
BMW
We are the Premier JE Pistons BMW Distributor. We have the blueprints for all popular (and some not so popular) BMW engines in almost any Bore size, Compression ratio, Stroke, and Rod combination...If you call JE for BMW pistons chances are they will just refer you to us....
Upgrade to Total-Seal Gapless 2nd Rings on any set for $25.00 Per Cylinder or Total-Seal Gapless Top Rings for $38 per cylinder.
Options: Items with * are recommended for Turbo, NOS, and High RPM Normally aspirated Endurance Racing use.
All BMW pistons are made to order and order time is usually 3-4 weeks. We have many of the Euro piston blueprints as well as the US models...In some cases if it is a dome that we do not have a profile for we may require a sample to make them but we have been able to make 90+% of the requested pistons just from our extensive library of BMW Blueprints and Job #'s. We recommend Total-Seal Gapless rings on all BMW sets. Please see our BMW page for more BMW Performance information.
http://www.2002performance.com
-
Kamil Dymon BMW M20 Engine Project per emails.
SKU: Kamil_M20ProjectWe can make proper 885 head style pistons 84.5 x 11:1
Learn More
$1395 set of 6 with Pins, Locs and Rings...6-7 week order time...
6 x 84.5mm pistons 11:1 compression 81mm 2.7 stroke x 130mm Rods.
Block height after .003 deck = 8.108 / 2.059 which is Perfect Head cc = 40cc
$78 Rod bearing set Standard
$139 main bearing set Standard
$157 ARP hardware for mains
$189 ARP hardware for Stock Rods
$24.26 6x 42mm intake valves. Later
$21.74 6x 36mm exhaust valves Later
$550 valve springs with retainers/keepers.12 x Dual Performance Springs + Titanium Retainer set. Direct replacement.
$00 valve seats MACHINIST SUPPLIES SEATS
$24 Set of 12 Valve Stem seals,
$102 Set of 12 valve guides.
$35 each x 12 rocker arms with new eccentrics. Hardened.
$253 ARP head studs or bolts
$395 NEW 284 cam for 885 head$3,978.00 -
Jan Heiselberg M10 / S14 Pistons + Pauter Rods
SKU: JanH_Pistons_20192 x Sets JE Pistons + 3 Sets of Rods.
Learn More
1 x Remake of S14B25 Long Rod
1 x Remake 89.2mm M10
2 x BMW S14B23 144mm Con Rods
1 x BMW S14 149.7mm Con Rods with ARP 625 Custom Age Bolts$3,500.00 -
Logan Klenner Mits JE Customs and Pauter Rods
SKU: Logan_Klenner_4G93TPistons:
Basic set with all your Requested Options and Gapless Top Ring Set
$1209
With Buttons add $80 I would prefer buttons.. Add the buttons in J
So still the exact same price as the $2015 Quote… That’s pretty impressive that the price has remained the same so long!Rods
Learn More
$195 Per Rod. Thanks, Please put 8 of these on the order.
Bearings:
$60 Per Set of 4 rods to Drill them here…
ACL 4B8036H-STD Bearings are $53.20 per 4 Cyl Rod Set This is a pretty comparable price to what I would pay here so I think it would be best for me to included these in this order. Please include 2x drilled sets
-------------
$3075.40 US + Shipping TBD after packing.
$3,505.96 -
Andrejs New Order for BMW M62B44 BALANCE DUE WITH SHIPPING.
SKU: andrejs_M62B44_DepositDeposit $2100
Learn More
--------------------
$269 FedEx Shipping
$345 ARP S65 HSK
$395 RACEWARE MSK
$1695 V8 H-Beam ROD SET with ARP2000 Bolts.
$2465 V8 JE PISTON SET
$119 KING RACING BEARINGS
$279 6 Top 1.2mm Rings Only
-------------------
$3467 Due
M62 piston set CR 9.5:1 90mm final bore
Lateral grooves
Piston skirts coated
Large valve relieves
Stock stroke 82.7mm
HD pins Max light weight, Supercharged boost design
+
Forged 4340 H-Beam Rods with ARP2000 Bolts.$3,467.00 -
Michael M20B25 Road Race engine package.
SKU: Michael_OZ_M20$1095 1 x Custom JE PIston Set 10.0:1 84.5mm
$219 1x ARP Head studs
$170 1x ARP Main Studs
$162 1x Gasket set ( Full engine Gasket and Seal Set ? ) Full set
$218 1x Head Gasket ( Cometic MLS Head gasket is the correct choise with the ARP
$350 $175 x 2 2x Oil Pump ( You meant 2 Oil Pumps correct ? ) Yes correct
$98 1x Rocker Shafts Pair.
$229 1x Vernier Pulley ( Adjustable Cam Gear ? ) Yes
$59 1x Exhaust stud Nuts set + 1x Intake stud nuts set
$50 1x windage tray
-------
$2650 US+ Shipping of course...Needs to be boxed and weighed before we can get final cost...Likely in the $200 to low $200 range...
Learn More
Low Value Invoices for customs upon request...Below $1000 AUD with Freight...$3,021.00 -
Longlom Thailand Z Car Parts Package
SKU: Z_Custom_EngineKit1. Compression ratio is 11:1 or 10.75,I will play around with custom head gasket. We have ron95 here.2. The head is N423. Expected HP should be close to 300hp at flywheel.
4. Camshaft is Tomei 290’ with 8.80mm camlift.Delivery address is :
Ms Supatra Eamporn
2/289 Anusaowareechai Condo, Phaholyothin Road Soi 2/1, Samsennai, Phayathai, Bangkok 10400
Tel +66894453584 or +66818332768> Large Tube 1.625" Race Header for High Compression 3.0+
$399
> 1. A set of DOMED JE pistons 88mm with coating skirt and valve pockets.
$1050 + $138 Skirt Coat depending on Dome, Dish, Flat, etc.
That is a set of 6 Forged JE Pistons with Pins, Locs and JE Pro-Seal Rings.
> 2. A set of Conrod for using with LD28 crankshaft.
No problem 133mm H-Beam Rods with ARP2000 Bolts
$650
> 3. A set of racing valve largest possible 46mm inlet or larger. !
46mm Intake and 38mm Exhaust
$250 Set of 12
> 4. A set of valve spring
with Matching Moly Steel Retainers. No Titanium
$ 215 for the full set...
> 5. A set of valve guide ,silicone bronze if possible.
$9.50 each = $114
----------
$2816
$345
----------
$3161 US$3,161.00
- M10
- M20
- 1986 - 1990 BMW M3 S14B23
- 1995 M3 M50/S50B30US 3.0L 24V E36 22MM PIN
- 1992 - 1995 M3 S50B30 EURO 3.0L 24V E36 21MM PIN
- 1996-1999 M3 S52B32US 3.2L 24V E36 22MM PIN
- 1996-1999 M3 S50B32 EURO 3.2L 24V E36 21MM PIN
- 2001-2006 BMW E46 M3, '01-'02 Z3, '06-'08 Z4 S54B32 3.2L 24V
- 2007-2013 N54B30
- 2009+ N55B30
- M30
- S14
- S50, S52 US and Euro and S54
- M42 , M44
- BMW S38B36, S38B38, and M88
- M50, M52, M54 and S54