BMW
BMW
We are the Premier JE Pistons BMW Distributor. We have the blueprints for all popular (and some not so popular) BMW engines in almost any Bore size, Compression ratio, Stroke, and Rod combination...If you call JE for BMW pistons chances are they will just refer you to us....
Upgrade to Total-Seal Gapless 2nd Rings on any set for $25.00 Per Cylinder or Total-Seal Gapless Top Rings for $38 per cylinder.
Options: Items with * are recommended for Turbo, NOS, and High RPM Normally aspirated Endurance Racing use.
All BMW pistons are made to order and order time is usually 3-4 weeks. We have many of the Euro piston blueprints as well as the US models...In some cases if it is a dome that we do not have a profile for we may require a sample to make them but we have been able to make 90+% of the requested pistons just from our extensive library of BMW Blueprints and Job #'s. We recommend Total-Seal Gapless rings on all BMW sets. Please see our BMW page for more BMW Performance information.
http://www.2002performance.com
-
Vahag BMW M30 Project Order #2. Engine and Suspension parts and ITB Kit Less Injectors.
SKU: Vahag_Stroker_M30$239 ALL Gaskets and seal set for the engine Top and Bottom.$229 COMETIC MLS 95mm Bore Head Gasket
$235 ARP Head StudsYou Do Not Need ARP Main Studs. Stock bolts are great.Learn More
$132 Rocker locks x 12
$169 Rear adjustable camber kit
$169 Rear adjustable toe kit
$3200 Throttle body kit with air filter except the injectors
-$250 Less Injectors
$591 + Air Horn Extensions and Air Filters
-----------
$4714.00$4,714.00 -
Longlom Thailand Z Car Parts Package
SKU: Z_Custom_EngineKit1. Compression ratio is 11:1 or 10.75,I will play around with custom head gasket. We have ron95 here.2. The head is N423. Expected HP should be close to 300hp at flywheel.
4. Camshaft is Tomei 290’ with 8.80mm camlift.Delivery address is :
Ms Supatra Eamporn
2/289 Anusaowareechai Condo, Phaholyothin Road Soi 2/1, Samsennai, Phayathai, Bangkok 10400
Tel +66894453584 or +66818332768> Large Tube 1.625" Race Header for High Compression 3.0+
$399
> 1. A set of DOMED JE pistons 88mm with coating skirt and valve pockets.
$1050 + $138 Skirt Coat depending on Dome, Dish, Flat, etc.
That is a set of 6 Forged JE Pistons with Pins, Locs and JE Pro-Seal Rings.
> 2. A set of Conrod for using with LD28 crankshaft.
No problem 133mm H-Beam Rods with ARP2000 Bolts
$650
> 3. A set of racing valve largest possible 46mm inlet or larger. !
46mm Intake and 38mm Exhaust
$250 Set of 12
> 4. A set of valve spring
with Matching Moly Steel Retainers. No Titanium
$ 215 for the full set...
> 5. A set of valve guide ,silicone bronze if possible.
$9.50 each = $114
----------
$2816
$345
----------
$3161 USLearn More$3,161.00 -
M20 High Compression M20 Piston Set Custom
SKU: JE_M20_HighCompression_CustomALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings:
Learn More$1,595.00 -
BMW S38 Custom JE Piston Set. ALL S38B35, M88, B36 and B38
SKU: JE_S38_Custom6 Cylinder JE Custom Forged Piston Set -
Learn More
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 6-8 weeks to make$1,650.00 -
Toyota 1MZ-FE V6 Custom Piston Set.
SKU: JE_1MZFE__Custom6 Cylinder JE Custom Forged Piston Set for Toyota 1MZ-FE V6
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations
Learn More$1,496.84 -
Ronny Bakken Re-Make M102 Turbo Pistons from 2006
SKU: Ronny_Bakken_M30Okay, here is all the info...
Learn More
The set of 6 Identical Replacement Pistons, pins, Locs and Rings is $1668.60
If you want the Upgraded Modern Ring Pack add $100
Shipping is $139 USD via FedEx... We can use that shipping amount as the value for customs so you have proof of payment...
Use this link to order and we will charge the shipping later when ready to go...$1,668.60 -
BMW N54 Turbo 6 Cylinder JE Custom Forged Piston Set -
SKU: JE_N54CustomBMW N54B30 Custom Piston Set ...Any Bore or Compression Ratio
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations
Learn More$1,496.84 -
Longlom Thailand 3TC Pistons 09-24 3 Sets
SKU: Longlom_L28_ThailandLearn More89mm Set is no problem...That is a Wiseco Catalog part..+ Shipping to be sorted out when ready to go...
89.5 is Not a Catalog part and has to be done as a Custom Set.
89mm is $759 Per Set as previously quoted
89.5mm is $795 per Set as a Custom part.$2,313.00
