BMW
BMW
We are the Premier JE Pistons BMW Distributor. We have the blueprints for all popular (and some not so popular) BMW engines in almost any Bore size, Compression ratio, Stroke, and Rod combination...If you call JE for BMW pistons chances are they will just refer you to us....
Upgrade to Total-Seal Gapless 2nd Rings on any set for $25.00 Per Cylinder or Total-Seal Gapless Top Rings for $38 per cylinder.
Options: Items with * are recommended for Turbo, NOS, and High RPM Normally aspirated Endurance Racing use.
All BMW pistons are made to order and order time is usually 3-4 weeks. We have many of the Euro piston blueprints as well as the US models...In some cases if it is a dome that we do not have a profile for we may require a sample to make them but we have been able to make 90+% of the requested pistons just from our extensive library of BMW Blueprints and Job #'s. We recommend Total-Seal Gapless rings on all BMW sets. Please see our BMW page for more BMW Performance information.
http://www.2002performance.com
-
Michael M20B25 Road Race engine package.
SKU: Michael_OZ_M20$1095 1 x Custom JE PIston Set 10.0:1 84.5mm
$219 1x ARP Head studs
$170 1x ARP Main Studs
$162 1x Gasket set ( Full engine Gasket and Seal Set ? ) Full set
$218 1x Head Gasket ( Cometic MLS Head gasket is the correct choise with the ARP
$350 $175 x 2 2x Oil Pump ( You meant 2 Oil Pumps correct ? ) Yes correct
$98 1x Rocker Shafts Pair.
$229 1x Vernier Pulley ( Adjustable Cam Gear ? ) Yes
$59 1x Exhaust stud Nuts set + 1x Intake stud nuts set
$50 1x windage tray
-------
$2650 US+ Shipping of course...Needs to be boxed and weighed before we can get final cost...Likely in the $200 to low $200 range...
Learn More
Low Value Invoices for customs upon request...Below $1000 AUD with Freight...$3,021.00 -
Kamil Dymon BMW M20 Engine Project per emails.
SKU: Kamil_M20ProjectWe can make proper 885 head style pistons 84.5 x 11:1
Learn More
$1395 set of 6 with Pins, Locs and Rings...6-7 week order time...
6 x 84.5mm pistons 11:1 compression 81mm 2.7 stroke x 130mm Rods.
Block height after .003 deck = 8.108 / 2.059 which is Perfect Head cc = 40cc
$78 Rod bearing set Standard
$139 main bearing set Standard
$157 ARP hardware for mains
$189 ARP hardware for Stock Rods
$24.26 6x 42mm intake valves. Later
$21.74 6x 36mm exhaust valves Later
$550 valve springs with retainers/keepers.12 x Dual Performance Springs + Titanium Retainer set. Direct replacement.
$00 valve seats MACHINIST SUPPLIES SEATS
$24 Set of 12 Valve Stem seals,
$102 Set of 12 valve guides.
$35 each x 12 rocker arms with new eccentrics. Hardened.
$253 ARP head studs or bolts
$395 NEW 284 cam for 885 head$3,978.00