Shop Hours: Monday-Thursday. 9:30am - 4:30pm Pacific Time Closed for Lunch from 1:00-2:00 PHONE HOURS: 10:00am - 3:00pm Pacific Time Monday - Friday ------------------------------------------------------ email us at [email protected] Call us at 1 818 764-1901
To all our Website visitors: We are in the middle of a huge site overhaul and on occasion the site will be become slow or glitch...If this happens while you are looking around or shopping Please Call Us or Send us an email [email protected] and we will help you with whatever you need...
Haltech Tyco CAN adaptor harness for Haltech IQ3 Street dash, Race dash & Racepak Universal CAN Interface Module (HT-06-230-VM-EFIUCAN) DTM2 to 8 pin Black Tyco 96"/2.4m cable - For use with Platinum Pro Plug-in, Sport, Sprint and any mutiple CAN device installation using a 3 or 6 port CAN HUB (including Elite ECUs) Learn More
Haltech DTM4 CAN adaptor harness for Haltech IQ3 Street dash, Race dash & Racepak Universal CAN Interface Module (HT-06-230-VM-EFIUCAN) DTM2 to DTM4 96"/2.4m cable - For use directly into an Elite ECU CAN port or Elite ECU Harness CAN connector. (Note: mutiple CAN device installations with a 3 or 6 port CAN HUB, including all ELITE ECUs must use HT-060200) This is the most cost effective cable to modify when making your own CAN adaptor harness for your aftermarket EFI system. Learn More
Haltech IQ3 Street Display Dash 20 EFI + 32 V-NET + 6 Direct input channels Internal CAN interface compatible with over 20 aftermarket EFI systems (inc OBDII) in addition to Racepak V-Net and new direct wired sensor inputs. Direct inputs for the integrated Street functions, green indicators, blue high beam and red park brake/warning condition lights. Stand alone friendly with cost effective configurable direct inputs for Tach, Road speed, Display dimming, Fuel level, Oil Pressure, Oil & Coolant Temp. Requires an additional CAN adaptor harness for plug and play use with compatible ECUs or OBDII Learn More
Haltech IQ3 Street Logger Dash 4GB 20 EFI + 32 V-NET + 6 Direct input channels Internal CAN interface compatible with over 20 aftermarket EFI systems (inc OBDII) in addition to Racepak V-Net and new direct wired sensor inputs. Direct inputs for the integrated Street functions, green indicators, blue high beam and red park brake/warning condition lights. Stand alone friendly with cost effective configurable direct inputs for Tach, Road speed, Display dimming, Fuel level, Oil Pressure, Oil & Coolant Temp. Requires an additional CAN adaptor harness for plug and play use with compatible ECUs or OBDII Learn More
