Carb Sync Tools
REDLINE DIAL TYPE SYNCHROMETER
Calibrated Synchronizing Tool for all Multiple Carb and Throttle Body applications.
The ONLY Proper Tool for Balancing your Multi Carb or Throttle Body System
Full line of adapters for any application....See below.
Order STE-SK
This is the Common Tool for all 40/45 DCOE and 40/44 IDF Carbs
Order STE-BK
This is the Larger Higher Flowing Tool for 48/50 DCOE and 48 IDA Carbs
Please use the flyer below to pick out the adapters you may want or need and enter into the search box above to order.
-
Synchronizing Tool STE 31/01
SKU: STE 31/01Inside Diameter: 5” Inside Height: 3” Use with BK & SK Learn More$50.60 -
Synchronizing Tool STE-BK
SKU: STE-BKThe STE BK will fit intakes of approx. 2” to about 2 5/8”. The BK features a rubber sleeve that can be rotated to open a by-pass allowing a higher air flow up to 50 kg/h; by-pass closed 1 to 35 kg/h. Using an additional adapter STE 118 will allow the BK to fit intakes as small as 1 ½” similar to the STE SK and allow for higher RPM air flow and synchronization. (Most universal combination) Learn More$79.00 -
Sale
Synchronizing Tool STE-SK
SKU: STE-SKThe STE SK will fit intakes of 1 5/8” to 2 1/8”. This SK will measure air flow from 1 to 30 kg/h. With this “lower” calibration scale it is easier to read the variations in air flow between carburetors at idle RPM’s only. The SK also has extended calibration at 1 to 3 kg/h also making it useful to check secondary throttle adjustment at idle. Learn More$63.95 -
