Search results for 'rings'

ANY M10 JE Forged Piston Set...N/A or Turbo engine.
Any Bore or Compression Ratio ....Any Stroke or Rod Combo.
Any M10 / S14 Cylinder Head. E12, 121, 1.8i,  E21, 1600, S14

ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations...
4 Cyl JE Custom Forged BMW M10 Piston Set
Set of 4 JE Forged Pistons with Pins Locs and JE ProSeal Rings.
Any Bore or Compression Ratio and Crank / Rod Combination
SPECIFY BORE AND COMPRESSION RATIO AT CHECKOUT
89mm-96mm in .5mm incements
6.5:1 - 13.5:1 Ratios.

ANY M10 JE Forged Piston Set...N/A or Turbo engine.
Any Bore or Compression Ratio ....Any Stroke or Rod Combo.
S14 Cylinder Head 

ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations...
4 Cyl JE Custom Forged BMW M10 Piston Set
Set of 4 JE Forged Pistons with Pins Locs and JE ProSeal Rings.
Any Bore or Compression Ratio and Crank / Rod Combination
SPECIFY BORE AND COMPRESSION RATIO AT CHECKOUT
89mm-96mm in .5mm incements
6.5:1 - 13.5:1 Ratios.

Cuystom Order set with Rush Order + 2 Day Air Shipping to Hotel in FL by 12-11-18

Rudy,
This is a Deposit Only so we can get Pistons ordered, Rods Shipped, etc.
I can edit this as needed and add a running tally for easy payment and keeping track of your order....

$735   Piston Set 90mm (+0.40) with E12 head with 11:1 compression ratio
$499   Rod Set 144mm with ARP2000 Bolts
Bearings ?
ARP ?
Rockers ?
Camshaft ?
Valve Springs to Match Camshaft ? 
Shipping, etc. 

BMW E30 M20B25 Part Number JE - 63717-850, 85.00mm (1.00mm/.040” oversize) 9.7:11

ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings

Parts List: LESS SHIPPING. Shipping sorted after boxed and weighed
$190  Small Bearing Front Hubs including bearings and seals
$239  Rear battery kit with Cut Off Switch
$155  polyurethane bushings kitt front and rear  
-----------
$584 US Parts total.

ANY S14 JE Forged Piston Set...N/A or Turbo engine.
Any Bore or Compression Ratio ....Any Stroke or Rod Combo.

ALL JE Custom Pistons take 3-3.5 weeks to make + 1 week for any coating operations...
4 Cyl JE Custom Forged BMW M10 Piston Set
Set of 4 JE Forged Pistons with Pins Locs and JE ProSeal Rings.
Any Bore or Compression Ratio and Crank / Rod Combination
SPECIFY BORE AND COMPRESSION RATIO AT CHECKOUT
89mm-96mm in .5mm incements
6.5:1 - 13.5:1 Ratios.

M10 Stock or very mild engine Street Use 4032 Forging Low Expansion Tight Clearance. 
3 Week Delivery Time
Set of 4 JE Forged Pistons with Pins Locs and JE ProSeal Rings.
Any Bore or Compression Ratio and Crank / Rod Combination
SPECIFY BORE AND COMPRESSION RATIO AT CHECKOUT
89mm-96mm in .5mm incements
8:1-10.5:1

$1095 1 x Custom JE PIston Set 10.0:1 84.5mm  
$219   1x ARP Head studs
$170   1x ARP Main Studs
$162   1x Gasket set ( Full engine Gasket and Seal Set ? )   Full set
$218   1x Head Gasket ( Cometic MLS Head gasket is the correct choise with the ARP 
$350   $175 x 2  2x Oil Pump ( You meant 2 Oil Pumps correct ? )  Yes correct
$98     1x Rocker Shafts Pair.
$229   1x Vernier Pulley ( Adjustable Cam Gear ? ) Yes
$59     1x Exhaust stud  Nuts set + 1x Intake stud nuts set
$50     1x windage tray
-------
$2650 US

+ Shipping of course...Needs to be boxed and weighed before we can get final cost...Likely in the $200 to low $200 range...
Low Value Invoices for customs upon request...Below $1000 AUD with Freight...

M20B23 Stroker
80.35mm bore
Piston crown to be flat
Height of 36.3mm.
Wrist pin to be the same as for M20 engines. ( 22mm ) 
Pistons, Pins, Locs and Rings.

Piston Set: 89.5mm + E21 Head + 9.5:1
$169  Cam Regrind
$76    O/S Eccentrics
$279  Shorty M10 header

BMW E21 Turbo engine project...
$895   JE Forged Pistons  90mm x 9.5:1 for TURBO 300-350 HP use
$599   144mm matching Forged Con Rods with ARP Bolts.

See below for the other items we discussed and check what you want to order...
We will sort out the other pieces like Camshaft, Valve Guides, Timing Components, etc.as we go along