Search results for 'as'
-
JE 2618 Custom Forged Piston Set. Datsun L24-FLAT TOP with VR's
Sku: Andy_Hvass_240Z Pistons
Custom L24 Flat Top Piston Set complete per your Spec sheet sent via email...
Learn More$1,395.00 -
4 Cyl JE Custom Forged BMW M10 Piston Set
Sku: Eran_M10_Pistons_Turbo
Please make the set for us
E12 Head TEP Domepistons diameter suited for stock cyl borestock cr 9.5:1forged pistons for turbochargedf applicationLearn More$849.30 -
6 Cylinder JE Custom Forged Piston Set - BMW M54 Turbo or Supercharged
Sku: JE_M54_Custom_SC
6 Cylinder JE Custom Forged Piston Set -
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations
Learn More$1,395.00 -
6 Cylinder JE Custom Forged Piston Set - M50, M52, M54 Normally Aspirated Piston Set.
Sku: JE_BMW_M54_ Custom
6 Cylinder JE Custom Forged Piston Set -
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 10-12 weeks to make
Learn More$1,395.00 -
Peter Karvelas BMW S50 EURO Custom Set
Sku: Peter_Karvelas_S50Euro
This will be a variation on one of our Catalog parts....
6 Pistons with Pins, Locs and Rings.
Includes Skirt Coat at no charge
We will make to your requested Piston Diameter 86.365mm at gauge Point and Change to 10.8:1$1416 + $110 ( Very close estimate ) FedEx Shipping..
5-6 weeks like usual...( Could be faster )$1,384.72 -
ACURA NSX JE Forged Piston Set. Custom Made to order.
Sku: Acura_NSX_V6
6 Cylinder JE Custom Forged Piston Set -
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations
Learn More$1,395.00 -
Victor Hagen Z Car Project
Sku: Victor_Hagen_Z
$995 JE Forged Piston set with Pins, Locs and Rings
Learn More
$179 Regrind your Camshaft
$169 ARP Head studs
$64 ARP Rod Bolts
$12 Freeze Plug Set
$129 Rod and Main Bearing set Std or .25
$229 Dual Spring Set with Moly Retainers
$250 12 Pieces OEM Nissan Rockers. NOT the Chines Crap being sold online that pop off above 5500 RPM
$109 12 Piece Lash Pads kit to suit cam grind
-----------
$2136 + Shipping$1,710.00 -
TJ Ignite Z Car Package
Sku: TJ_Ignite_ZCar
$995 JE Forged Piston set with Pins, Locs and Rings
Learn More
$179 Regrind your Camshaft
$169 ARP Head studs
$64 ARP Rod Bolts
$12 Freeze Plug Set
$129 Rod and Main Bearing set Std or .25
$229 Dual Spring Set with Moly Retainers
$250 12 Pieces OEM Nissan Rockers. NOT the Chines Crap being sold online that pop off above 5500 RPM
$109 12 Piece Lash Pads kit to suit cam grind
-----------
$2136 + Shipping$1,710.00 -
Michael M20B25 Road Race engine package.
Sku: Michael_OZ_M20
$1095 1 x Custom JE PIston Set 10.0:1 84.5mm
$219 1x ARP Head studs
$170 1x ARP Main Studs
$162 1x Gasket set ( Full engine Gasket and Seal Set ? ) Full set
$218 1x Head Gasket ( Cometic MLS Head gasket is the correct choise with the ARP
$350 $175 x 2 2x Oil Pump ( You meant 2 Oil Pumps correct ? ) Yes correct
$98 1x Rocker Shafts Pair.
$229 1x Vernier Pulley ( Adjustable Cam Gear ? ) Yes
$59 1x Exhaust stud Nuts set + 1x Intake stud nuts set
$50 1x windage tray
-------
$2650 US+ Shipping of course...Needs to be boxed and weighed before we can get final cost...Likely in the $200 to low $200 range...
Learn More
Low Value Invoices for customs upon request...Below $1000 AUD with Freight...$3,021.00 -
Louis in Malta BMW M20B25 ARP and Cometic
Sku: Louis_Malta_ARPCometic
Can you please send me the link for purchasing Cometic MLS Gasket 85mm x .060 $192 ARP Head Studs $228 ARP Main Studs $142 $89 FedEx shipping for my m20 BMW Learn More$742.14 -
Lars Rasch Z engine parts
Sku: Lars_Rasch_Z
$1050 Piston set at 8.5 or 8.8:1 is ideal...8.0 is a bit low...
Learn More
I recommend you do Skirt Coating, Contact Reduction and Accumulator grooves...
See below for options and other pieces...
$699 Forged 4340 133mm Rods with ARP2000 Bolts.
$169 ARP head Studs
$179 Cometic 87mm Bore 1.2mm Head gasket
$119 Turbo oil Pump$1,197.00 -
Blake Stephens L20 Engine Project
Sku: Blake_L20
Deposit Only to get Pistons and Rods underway with the balance and shipping when ready to ship.
Learn More
$875 JE 9.8:1 x 87mm Piston Set
$1250 Pauter Lightweight 4340 Con Rod Set with ARP2000 Bolts
$139 Big Bore Head Gasket
$128 Rod and Main Bearings
$154 ARP Head Studs
$160 44 x 35 Performance Valves
$179 Turbo Oil Pump
Other items to be considered and added as needed...
Re-Grind your camshaft.
Complete Timing Chain and Gear Set
Full Engine gasket and seal set
Valve Springs / Retainers$1,900.00 -
Suhla M20B23 Stroker Piston Set
Sku: Suhla_M20JEPistons
M20B23 Stroker
80.35mm bore
Piston crown to be flat
Height of 36.3mm.
Wrist pin to be the same as for M20 engines. ( 22mm )
Pistons, Pins, Locs and Rings.$1,340.09 -
Pasi Hapulahti VOLVO Piston order x 8 pieces
Sku: Pasi_8Pieces_Volvo
8 Pieces complete with Pins, Locs and RIngs. No options or coatings.
$1479.25 + Shipping of course...
7-8 week lead time these days....
Low value customs docs upon request....- Turbo use- Flat top- Bore 92,10 - 92,30mm (best fit to rings)- Compression height 46,50mm- Pin 24,00mm- Not any coatingsLearn More$1,479.25 -
4 Cyl JE Custom Forged Spitfire 1300 and 1500 Flat Top.
Sku: Spitfire_JE-1300-1500
4 Cyl JE Custom Forged Piston Set Set of 4 for Spitfire / Midget 1300 and 1500
Learn More
JE Forged Pistons with Pins Locs and JE ProSeal Rings
FLAT TOP
ANY BORE SIZE.( Assuming rings are offered...Always clear bore with us first. )
ALL Spitfire / Midget Pistons are Custom Made to order...
8-10 week lead time...$835.00 -
Michael Williams G4KH Pistons and Rods for Turbo Hyundai Project
Sku: G4KH
Basic Set with Pins and locs $852.63
Learn More
Gapless Top RIngs $180
Ceramic Crown / Tuff Skirt Coat $190
Accumulator and Contact Reduction Grooves $48
Econo Undercrown Mill ( No need for 3D on this ) $100
$1370.63
$1149 Pauter Forged 4340 Con Rods with ARP2000 Bolts for 550 HP$2,519.63 -
Mark Australia BMW M10 E21 Turbo engine project
Sku: Mark_AU_M10Turbo
BMW E21 Turbo engine project...
Learn More
$895 JE Forged Pistons 90mm x 9.5:1 for TURBO 300-350 HP use
$599 144mm matching Forged Con Rods with ARP Bolts.
See below for the other items we discussed and check what you want to order...
We will sort out the other pieces like Camshaft, Valve Guides, Timing Components, etc.as we go along$1,494.00