Search results for 'pistons'

$695     Set of JE Forged Turbo Pistons 9.0:1 for Propane with 62cc Chamber and 89.5mm bore
+
$895     Set 144mm PAUTER Forged 4340 Con Rods with ARP2000 Bolts
Will use normal M10 Bearings
$109 for the set or Rods and Mains UnCoated
Add $65 for Coated Rod Bearings..
----------
$1764 US + Shipping + Other options and Add Ons. 

See below for other options, add On's etc. 
$155    Comeitc MLS Head Gasket .051-.070 thickness to compensate for milled head
$163    ARP Head Stud Set
$139    FULL Engine Gasket and Seal Set.

6 Cylinder JE Custom Forged Piston Set - Dish, Flat or Dome - with or without valve pockets

ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings

Please note: ALL JE Custom Pistons are currently 7-8 Week lead time to make

2 x Sets JE Pistons + 3 Sets of Rods.
1 x Remake of S14B25 Long Rod
1 x Remake 89.2mm M10
2 x BMW S14B23 144mm Con Rods
1 x BMW S14 149.7mm Con Rods with ARP 625 Custom Age Bolts

M20 Stroker pistons that will suit - a 2.7 crank, 10.5/1 compression, 135mm rod and 0.5 oversized
731 Head !!!!

6 Cylinder JE Custom Forged Piston Set - M20 TURBO APPLICATIONS

ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings

Please note: ALL JE Custom Pistons take 6-8 weeks to produce

6 Cylinder JE Custom Forged Piston Set - M20 OEM Crown with Stroker  or Long / Short Rods

ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings

Please note: ALL JE Custom Pistons take 8-9 weeks to make at this time

6 Cylinder JE Custom Forged Piston Set - M20 High Compression or Turbo

ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings

Please note: ALL JE Custom Pistons take 6-8 weeks to make

$695 + $172
 1.       J&E Piston Set for e12
                 + Head and Bore or compression ratio, Stroke or rod length combo
               $695  Pistons, Pins, Locs and Rings.
               13.5cc Total + Volume
                For the above:
                S14 2.3 liter crankshaft Check
                M10 2.0 liter rods Check
                Pistons coated on top and on side skirts +$172  Ceramic Top and Permanent Skirt Coat.
                I need these pistons for a street engine 10.5: 1 CR  Check
                Approx 89.5 mm bore Check… They will be for Exactly and 89.5mm Finished bore
               (The previous set I ordered, for a S14 2.3 liter, these pistons have skirts too short for a street engine, I need them to be like the 1.8i pistons 344909  job # 1025190 .) Okay…We can go with a Full Skirt Forging. No difference in price, etc.
 
2.       1x Haltech Sprint 500 Management Package –$1550
3.       1x Mag P/U Bracket $110
4.       1x ITB EFI Throttle Body Kit –$1695
   1 x TPS with Plug and Pins $119
   1x Distrib Plug $45
5.       1x Set Air Horn Extensions –$160
6.       1x Pair RamFlo style filters –$82
7.       1x 2002 Front single tube brace with Torque Brace $238
-------------
$4866 

Christopher Langsten
Vintage Sports & Restoration
3 Robinson Road
Bow, NH 03304
www.VSR1.com
P: 603-228-2888

ANY M10 JE Forged Piston Set...N/A or Turbo engine.
Any Bore or Compression Ratio ....Any Stroke or Rod Combo.
Any M10 / S14 Cylinder Head. E12, 121, 1.8i,  E21, 1600, S14

ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations...
4 Cyl JE Custom Forged BMW M10 Piston Set
Set of 4 JE Forged Pistons with Pins Locs and JE ProSeal Rings.
Any Bore or Compression Ratio and Crank / Rod Combination
SPECIFY BORE AND COMPRESSION RATIO AT CHECKOUT
89mm-96mm in .5mm incements
6.5:1 - 13.5:1 Ratios.

BMW E21 Turbo engine project...
$895   JE Forged Pistons  90mm x 9.5:1 for TURBO 300-350 HP use
$599   144mm matching Forged Con Rods with ARP Bolts.

See below for the other items we discussed and check what you want to order...
We will sort out the other pieces like Camshaft, Valve Guides, Timing Components, etc.as we go along

M20B23 Stroker
80.35mm bore
Piston crown to be flat
Height of 36.3mm.
Wrist pin to be the same as for M20 engines. ( 22mm ) 
Pistons, Pins, Locs and Rings.

M10 Stock or very mild engine Street Use 4032 Forging Low Expansion Tight Clearance. 
3 Week Delivery Time
Set of 4 JE Forged Pistons with Pins Locs and JE ProSeal Rings.
Any Bore or Compression Ratio and Crank / Rod Combination
SPECIFY BORE AND COMPRESSION RATIO AT CHECKOUT
89mm-96mm in .5mm incements
8:1-10.5:1

ANY S14 JE Forged Piston Set...N/A or Turbo engine.
Any Bore or Compression Ratio ....Any Stroke or Rod Combo.

ALL JE Custom Pistons take 3-3.5 weeks to make + 1 week for any coating operations...
4 Cyl JE Custom Forged BMW M10 Piston Set
Set of 4 JE Forged Pistons with Pins Locs and JE ProSeal Rings.
Any Bore or Compression Ratio and Crank / Rod Combination
SPECIFY BORE AND COMPRESSION RATIO AT CHECKOUT
89mm-96mm in .5mm incements
6.5:1 - 13.5:1 Ratios.

Rudy,
This is a Deposit Only so we can get Pistons ordered, Rods Shipped, etc.
I can edit this as needed and add a running tally for easy payment and keeping track of your order....

$735   Piston Set 90mm (+0.40) with E12 head with 11:1 compression ratio
$499   Rod Set 144mm with ARP2000 Bolts
Bearings ?
ARP ?
Rockers ?
Camshaft ?
Valve Springs to Match Camshaft ? 
Shipping, etc. 

Cuystom Order set with Rush Order + 2 Day Air Shipping to Hotel in FL by 12-11-18

ANY M10 JE Forged Piston Set...N/A or Turbo engine.
Any Bore or Compression Ratio ....Any Stroke or Rod Combo.
S14 Cylinder Head 

ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations...
4 Cyl JE Custom Forged BMW M10 Piston Set
Set of 4 JE Forged Pistons with Pins Locs and JE ProSeal Rings.
Any Bore or Compression Ratio and Crank / Rod Combination
SPECIFY BORE AND COMPRESSION RATIO AT CHECKOUT
89mm-96mm in .5mm incements
6.5:1 - 13.5:1 Ratios.