Search results for 'as'

6 Cylinder JE Custom Forged Piston Set -

ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings

Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations

$995 JE Forged Piston set with Pins, Locs and Rings
$179 Regrind your Camshaft
$169 ARP Head studs
$64 ARP Rod Bolts
$12 Freeze Plug Set
$129 Rod and Main Bearing set Std or .25
$229 Dual Spring Set with Moly Retainers
$250 12 Pieces OEM Nissan Rockers. NOT the Chines Crap being sold online that pop off above 5500 RPM
$109 12 Piece Lash Pads kit to suit cam grind
-----------
$2136 + Shipping

$995 JE Forged Piston set with Pins, Locs and Rings
$179 Regrind your Camshaft
$169 ARP Head studs
$64 ARP Rod Bolts
$12 Freeze Plug Set
$129 Rod and Main Bearing set Std or .25
$229 Dual Spring Set with Moly Retainers
$250 12 Pieces OEM Nissan Rockers. NOT the Chines Crap being sold online that pop off above 5500 RPM
$109 12 Piece Lash Pads kit to suit cam grind
-----------
$2136 + Shipping

84.35mm
A set of 4 With 93 Series HD Pins with new locs and pin fit.
+
Gapless Top Ring Set 
+
Skirt and Crown Coat and Support Rails

$1235 + Shipping to you to be sorted out when ready to ship....

$1095 1 x Custom JE PIston Set 10.0:1 84.5mm  
$219   1x ARP Head studs
$170   1x ARP Main Studs
$162   1x Gasket set ( Full engine Gasket and Seal Set ? )   Full set
$218   1x Head Gasket ( Cometic MLS Head gasket is the correct choise with the ARP 
$350   $175 x 2  2x Oil Pump ( You meant 2 Oil Pumps correct ? )  Yes correct
$98     1x Rocker Shafts Pair.
$229   1x Vernier Pulley ( Adjustable Cam Gear ? ) Yes
$59     1x Exhaust stud  Nuts set + 1x Intake stud nuts set
$50     1x windage tray
-------
$2650 US

+ Shipping of course...Needs to be boxed and weighed before we can get final cost...Likely in the $200 to low $200 range...
Low Value Invoices for customs upon request...Below $1000 AUD with Freight...

$1050     Piston set at 8.5 or 8.8:1 is ideal...8.0 is a bit low...
               I recommend you do Skirt Coating, Contact Reduction and Accumulator grooves...
               See below for options and other pieces...
$699       Forged 4340 133mm Rods with ARP2000 Bolts.

$169       ARP head Studs 
$179       Cometic 87mm Bore 1.2mm Head gasket
$119       Turbo oil Pump

A set of 4 Pistons Identical to Davids with Coatings, Gapless Rings, etc. 
$1269 

A Base Set of pistons with No Coatings, Regular Rings, Etc.
$865  

Deposit Only to get Pistons and Rods underway with the balance and shipping when ready to ship.
$875     JE 9.8:1 x 87mm Piston Set
$1250   Pauter Lightweight 4340 Con Rod Set with ARP2000 Bolts
$139     Big Bore Head Gasket
$128     Rod and Main Bearings
$154     ARP Head Studs
$160     44 x 35 Performance Valves
$179     Turbo Oil Pump
Other items to be considered and added as needed...
Re-Grind your camshaft.
Complete Timing Chain and Gear Set
Full Engine gasket and seal set
Valve Springs / Retainers

M20B23 Stroker
80.35mm bore
Piston crown to be flat
Height of 36.3mm.
Wrist pin to be the same as for M20 engines. ( 22mm ) 
Pistons, Pins, Locs and Rings.

We aim about 320hp / 8800 rpm.
Asymmetric FSR Forging which will give us the best weight to strength ratio...
Gapless Top Rings
Undercrown Milling, Double Pin Oilers, Skirt Coating, Contact Reduction and Accumulator Grooves

$650   Piston set +.5 x 9:1
$129   Replacement valve set
$229   Oil pump
$79     Water pump
$159   Rod bearings + Main bearings (including thrust washers)
--------
$1246

Basic Set with Pins and locs $852.63
Gapless Top RIngs $180
Ceramic Crown / Tuff Skirt Coat $190
Accumulator and Contact Reduction Grooves $48
Econo Undercrown Mill ( No need for 3D on this ) $100
$1370.63 

$1149  Pauter Forged 4340 Con Rods with ARP2000 Bolts for 550 HP