Search results for 'Header'
-
Datsun Header L series short header
Sku: datsun_z_00001
Datsun 4 Cyl Shorty Headers.
Learn More
Shown with INCLUDED High Heat Header Gasket
This is THE Header for use in any 510, Pickup, 610, 710, etc. with L16, L18 or L20B
Specifically designed for the L20B in the 510 but fits all other models as well.
Available with Optional Polished ceramic Coatings. See below$319.00 -
Datsun header Z "L" series 240Z-280ZX with head pipe 1.5" Diameter.
Sku: datsun_z_00010
1.5" Diameter Pipe3 into 2 Style header with head pipe
Learn More
This is the header we use on all our builds here...
Shown with Optional High Heat Header Gasket
14GA Steel. Will last for many years.
Add $275 for Polished Ceramic Coating...See below for pic of coated header.
Looks better than the pic. Really nice polished ceramic coating.$379.00 -
Datsun Header Gasket for 4 Cyl L Series
Sku: L20hdrgsk
Header Gasket for 4 Cyl L Series Learn More$24.00 -
Nissan VG30 Header.
Sku: vg30_hdr
VG30 header for 300ZX Fits all 84-89 Must specify year when ordering Learn More$475.00 -
1.625" Big Tube Race Datsun header Z "L" series 240Z-280ZX with head pipe and Gasket.
Sku: ZHeader_1.625
1.625" Primary Datsun Z Header. Big Tube for 250+ HP Engines. All Square Port
Learn More
This header is totally unique...The Ultimate header for all 3.0+ engines or any Z Making more than 275 HP.
This will make a huge difference on any Performance Build with Triple Carbs for the Street or obviously Track applcations
Large Tube 1.625" Primary Tube 3-2-1 Design with 2.25" Collectors at the merge.
2.5" Outlet
Fits all 240Z, 260Z, 280Z and ZX models.
NOT the Crappy Pacesetter header that others are selling
NOT the Chinese made fall apart headers.
100% USA Made 14ga steel header
1/2" thick flange
Shown with Optional High Heat Header Gasket$399.00 -
Longlom Thailand Z Car Parts Package
Sku: Z_Custom_EngineKit
1. Compression ratio is 11:1 or 10.75,I will play around with custom head gasket. We have ron95 here.2. The head is N423. Expected HP should be close to 300hp at flywheel.
4. Camshaft is Tomei 290’ with 8.80mm camlift.Delivery address is :
Ms Supatra Eamporn
2/289 Anusaowareechai Condo, Phaholyothin Road Soi 2/1, Samsennai, Phayathai, Bangkok 10400
Tel +66894453584 or +66818332768> Large Tube 1.625" Race Header for High Compression 3.0+
$399
> 1. A set of DOMED JE pistons 88mm with coating skirt and valve pockets.
$1050 + $138 Skirt Coat depending on Dome, Dish, Flat, etc.
That is a set of 6 Forged JE Pistons with Pins, Locs and JE Pro-Seal Rings.
> 2. A set of Conrod for using with LD28 crankshaft.
No problem 133mm H-Beam Rods with ARP2000 Bolts
$650
> 3. A set of racing valve largest possible 46mm inlet or larger. !
46mm Intake and 38mm Exhaust
$250 Set of 12
> 4. A set of valve spring
with Matching Moly Steel Retainers. No Titanium
$ 215 for the full set...
> 5. A set of valve guide ,silicone bronze if possible.
$9.50 each = $114
----------
$2816
$345
----------
$3161 US$3,161.00