Products
- Honda V6 J32 3.2L Exhaust Valve 28x5.45x117.7mm Inconel Dish
- 81.25mm Piston ring set 1x3.10/1.2x3.40/2.8x3.10mm, High Performance / Gas Nitrided
- MiniCooper Beehive spring Kit: 70@33.60 /163@10 Lbs/mm CB:22.20mm-SPR-MC56BE (16) RET-MC56/T1 (16)
- Lash Cap 5.5mm 2.8mm deep/ Tickness 2.85mm
- Lash Cap 5.5mm 2.8mm deep/ Tickness 2.90mm
- Lash Cap 5.5mm 2.8mm deep/ Tickness 2.80mm
- Dual Valve Spring kit: 86 at 31.75 (8) SPR-V2091/4 + (8)RET-021 (Triple Groove)+ SEAT-VW8V-1
- Ecoboost 2.0-2.3L Intake valve / 32.5(std) x 5.47mm x 103.3mm / SS EV8/ Black Nitride/back cut/undercut / Dish/single groove (std).
- Nissan CA18DET Exhaust valve 29.15x5.95x89.30mm/ Inconel/ +1mm size/chrome coating
- Nissan CA18DET Intake Valve 35.15x5.97x88.90mm / SS/ Blk. Nitrided/ stk.size/undercut/back-cut
- Subaru WRX FA20F 2.0L Intake valve 34mm(std) x 5.46mm x 105mm/ SS EV8/undercut/ back cut.
- BMW N54 Intake valve / 31.4mm(std) x 4.96 x 106.7mm/ SS Black Nitride /Dish/ Single groove/ Use with locks KPR-5.0/7S
- BMW N54 Exhaust valve / 28(std) x 5.95 x 114.9mm/ Inconel hollow Sodium filled/ Chrome coat/Dish/ Single gro./ Use with locks KPR-6S/7.
- BMW N54 Conical spring kit SPR-FE20-BE(24) - 75lbs @ 36.5mm - Rate: 8lbs/mm - CB @ 13.3mm lift - Max lift: 12mm - Intake RET-BMN54/TI (12) - Exhaust RET-BMN54/TE (12) - Use with Factory valve stem Seal
- Titanium Retainer BMW N54 Intake - 7 Degree - 5mm valve stem - Single or Triple groove valve - use with SPR-FE20N54-BE
- Beehive valve spring 27.50/19.70, CB:21.80mm/ 65lbs@36 / 211 lbs@11.5mm lift/ Chrome Silicon/ Max recommended lift 14.20mm
- Dual valve spring 27.50/19.70, CB:21.80mm/ 70lbs@35.5mm / 217 lbs@11.5mm lift/ Chrome Silicon/ Max recommended lift 12.50mm
- Dual valve spring 27.50/19.70, CB:21.80mm/ 85lbs@34.25mm / 234 lbs@11.5mm lift/ Chrome Silicon/ Max recommended lift 11.50mm
- DLC Coated Cam Follower 31mm x 25.5 x 3.28 + Use shim 8mm diam. thickness 1.45 - 3.20mm.
- Intake valve Stainless steel Black Nitride / Std size/ Single groove conversion / Use with Valve Locks KPR-50/7S
- Exhaust valve Inconel alloy/ single groove conversion / Use with Valve Locks KPR-50/7S
- Honda RSX / K20 Intake Valve 36(+1)x5.48x106.95mm/TITANIUM/ Flat. Need to be used with 1.9-2mm Lash Cap & Spring SPR-H1000D
- Toyoya 2ZZ Single valve spring 24/16.5mm, CB:24.90mm/73lbs@38.5mm/178lbs@10.0mm lift, chrome silicon
- Yamaha FRZ 1800 Intake valve (+1) / 35x 5.48 x 90.80
- Renault F4R RS Dual valve spring 27.50/20/15.20mm, CB:20.7mm/ 83lbs@34.mm / 204 lbs@10mm lift/ Chrome Silicon.
- Renault F4R RS Dual valve spring 27.50/20/15.20mm, CB:20.7mm/ 72lbs@34.mm / 168 lbs@10mm lift/ Chrome Silicon.
- Conical Spring - 72lbs @ 37.2mm - Rate: 8lbs/mmm- CB: 23mm TO BE USED WITH OEM RETAINERS
- Dual valve spring for Seedoo 4TEC 103lbs at 34.10mm / 214 lbs 10 lift CB 20.7mm. SPR-EC3027D-SE (12) + RET-EC3020-SE (12)
- Yamaha FZR1800 Exhaust Inconel valve (+1) 30x 5.47 x 89.95mm
- Beehive Spring 70lbs @ 35.5mm / Rate 12.7lbs/mm.
- Intake Valve; Stock Length High Flow [Mazda Protege(1990-1999), Mazda Miata(1994-1997, 1999-2005), Ford Escort(1991-1996)]
- Duratec 2.0L Exhaust valve / 31mm x 5.95 x 105.9/ Tip 5.0 / Dish / Inconel Hollow Sodium filled / straight 6mm stem
- VW Audi 1.8 5V 4cyl / 58lbs @ 36.60mm (Intake) / 91lbs @ 33.20mm (exhaust) SPR-A2095(12) +SPR-H100DR-AU(8) +Ret-AU5VI/T2(12) +Ret-AU5VE/T1(8)+ (8)SEAT-H1000 (exhaust only)
- Dual Spring Diam 30.00/22.20/16.80mm 80lbs@33.20mm 228lbs@11mm lift CB 18.5mm/Chrome silicon
- BMW M50 86mm 0.080
- BMW M50 87mm 0.080
- BMW S50 87.1 0.070
- BMW S14 95.1 0.080
- BMW S54 87.5 0.047
- HONDA S2000 88 .033
- Mazda MZR 2.0/2.3L 90 0.029
- MITSUBISHI 4G63 Evo 4-8 86.3 .040
- VW 16v KR-PL 1978+ 83.8 .055
- VW VR6 2.8-2.9L 12v 82.5 0.0255
- VW VR6 2.8-2.9L 12v 84.1 0.0255
- Titanium retainer for beehive spring SPR-TS1015-BE Subaru EJ20, EJ25.
- Mitsubishi 6G72 Single Valve Spring Diam 28.10/28.00mm 92lbs@ 37.15mm/207lbs @ 11.5 lift CB 23.50mm
- MLS Head Gasket Honda B18A/B w / VTEC head - Diam 84mm for Bore 82.5 - 83.5mm / 0.85mm (.033") thick
- MLS Head Gasket Honda B18A/B w / VTEC head - Diam 85mm for Bore 83.5 - 84.5mm / 0.85mm (.033") thick
- MLS Head Gasket Honda D15Z1/ Y5-Y8/ / 16Z6 - Diam 76mm for Bore 75-75.5mm / 0.85mm (.033") thick