Products
- (Springs only) Single Valve spring Kit 78 @ 38.5mm SPR-M1005S + OEM Retainer + OEM Seat (opt. Spring shim SS-3025)
- Single Valve spring Kit 77 @ 39mm SPR-H1021S + RET-H60/T1 + SEAT-TB1020D
- Dual Valve spring Kit 102 @ 39mm SPR-H1020+2024 + RET-H60/T1 + SEAT-TB1020D
- SINGLE - Dual Valve Springs; For All Motor Aplications
- Honda B16A/18C Exhaust Racing Valve 29(+1) x 5.45 x 102.00 mm /INCONEL/ Blk. Nitrided /Dish / 1mm Oversize
- Dual BeHive Valve Springs K20A2
- (set of 16) Valve Springs [Acura Integra(1992-2003)]
- Lash Cap 7.0mm / 4.00mm deep/ Thickness
- INDIVIDUAL retainer from RET-TS60-WRX1 Kit
- Intake Valve Flat [Lotus Exige(2006-2009), Lotus Elise(2005-2009), Toyota Celica(2000-2005)]
- Exhaust Valve Flat [Lotus Exige(2006-2009), Lotus Elise(2005-2009), Toyota Celica(2000-2005)]
- Mazda Intake Valve
- Mazda Springs, Retainers, and seats (Kit)
- Dual Springs; Outer Spring 27.5mm OD / 20mm ID; Inner Spring 20mm OD / 15.2mm ID; 82lbs@34.25mm Seated; 220lbs@11.5mm Open [Subaru Impreza(2002-2009)]
- Drag Race Valve Spring Kit for Toyota 2JZ
- Honda Y/ACURA J30-J32 qty of 1 = 1 springs 24re needed
- Piston Rings
- Lash Cap 5.5mm / 1.75mm deep/ Thickness
- Lash Cap 5.5mm / 2.0mm deep/ Thickness
- Lash Cap 5.5mm / 2.75mm deep/ Thickness
- Lash Cap 5.5mm / 2.95mm deep/ Thickness
- Lash Cap 5.5mm / 3.0mm deep/ Thickness
- Lash Cap 5.5mm / 4.0mm deep/ Thickness
- Lash Cap 6.0mm / 4.0mm deep/ Thickness
- Lash Cap 6.5mm / 4.0mm deep/ Thickness
- Lash Cap 7.0mm / 3.50mm deep/ Thickness
- Lash Cap 6.5mm / 1.67mm deep/ Thickness
- Opal /Vauxhall C20XE /C20LET Dual valve spring
- Lash Cap 6.0mm / 1.80mm deep/ Thickness
- Lash Cap 6.0mm / 1.45mm deep/ Thickness
- Valve springs for a Nissan SR20 VE 2.0 Lts DOHC
- Valve Lock;10 degrees; Req Two per Valve [Honda Civic(1999-2000, 2002-2005, 2008), Honda Accord(2003-2005), Acura Tsx(2004-2008), Acura Integra(1990-1993, 1997-2001)]
- Lash Cap 6.0mm / 1.50mm deep/ Thickness
- Piston Rings - 81mm
- Lash Cap 5.5mm / 1.5mm deep/ Thickness
- Lash Cap 6.5mm / 1.65mm deep/ Thickness
- 77mm piston rings
- Mazda 2.0lts FS Dual Valve Spring Kit: 85lbs @34.8mm / Spr-TC25D + RET2500/T1 +SS-3012 + VS-T6SM
- Single Valve spring Kit for VW-Audi 2.0TFSI: in 73lbs @ 38.6 ex 85lbs @37.2 / CB: 24.9 / max lift in 13.7 ex 12.3 / SPR-A2416 + RET-A2416 (16pcs each)
- Valve springs for 2005+ VW Rabbit 2.5T 5cyl (20V): in 73lbs @ 38.6 ex 85lbs @37.2 / CB: 24.9 / max lift in 12.5 ex 11.00
- Dual valve spring for RB25 83lbs@ 35mm
- Honda Bseries DRAG ONLY spring kit
- Wrist pin for P4-H81-N2R
- CIR clip for pistons
- CIR clip for pistons
- CIR clip for pistons
- (6) BMW S52-B32 3.2lt piston
- VW TSFI2.0 lt Single valve spring
- Dual valve spring for Subaru
- Mazda Protégé MX6 FS