Products
- Ford Falcon Barra / XR6 Australia Exhaust valve 33mm (+1) x 5.98mm x 105.80mm/ Single groove - Tip 10.3mm / Inconel/ Use Keeper KPR-6T-ST
- Ford Falcon Barra / XR6 Australia Exhaust valve 33mm (+1) x 5.98mm x 105.80mm/ Single groove - Tip 10.3mm / Inconel/ Use Keeper KPR-6T-ST (SET OF 12)
- Ford Falcon Barra / XR6 Australia Exhaust valve 34mm (+2) x 5.98mm x 105.80mm/ Single groove - Tip 10.3mm / Inconel/ Use Keeper KPR-6T-ST
- Ford Falcon Barra / XR6 Australia Exhaust valve 34mm (+2) x 5.98mm x 105.80mm/ Single groove - Tip 10.3mm / Inconel/ Use Keeper KPR-6T-ST(SET OF 12)
- Ford Falcon Barra / XR6 Australia/ Intake valve 35.5mm (+0.5) x 5.98mm x 122.85mm/ Triple groove / SS EV8 Black Nitride.
- Ford Falcon Barra / XR6 Australia/ Intake valve 35mm (std) x 5.98mm x 122.85mm/ Single groove - Tip 12.3mm / SS EV8 Black Nitride/ Use Keeper KPR-6T-ST
- Ford Falcon Barra / XR6 Australia/ Intake valve 35mm (std) x 5.98mm x 122.85mm/ Single groove - Tip 12.3mm / SS EV8 Black Nitride/ Use Keeper KPR-6T-ST (SET OF 12)
- Ford Falcon Barra / XR6 Australia/ Intake valve 35mm (std) x 5.98mm x 122.85mm/ Triple groove / SS EV8 Black Nitride.
- Ford Falcon FXR6 beehive spring kit: 83lbs @ 39.3mm- 167mm @ 11mm : SPR-FXR6-BE1 (24) RET-FXR6-T1(24). Max Lift 11.40mm
- Ford Falcon FXR6 beehive spring kit: 91lbs @ 1.547"mm- 210mm @ .515" lift : SPR-FXR6-BE2 (24)+ RET-FXR6-T1(24)
- Ford Falcon XR6 Australia/ 36mm (+1) x 5.98mm x 122.85mm/ Single groove - Tip 12.3mm / SS EV8 Black Nitride / Use Keeper KPR-6T-ST
- Ford Focus MK2 RS 2.5L/ Volvo 5cyl - B5254T - Exhaust valve 28 (+1) x 5.95 x 103.3mm / Triple Groove MK6H/ Inconel
- Ford Focus MK2 RS 2.5L/ Volvo 5cyl - B5254T - Exhaust valve 28 (+1) x 5.95 x 103.3mm / Triple Groove MK6H/ Inconel (SET OF 10)
- Ford Focus MK2 RS 2.5L/ Volvo 5cyl - B5254T - Intake valve 31 x 5.96 x 104.3mm / Triple Groove MK6H/ SS EV8/ Black nitrided.
- Ford Focus MK2 RS 2.5L/ Volvo 5cyl - B5254T - Intake valve 31 x 5.96 x 104.3mm / Triple Groove MK6H/ SS EV8/ Black nitrided.(SET OF 10)
- Ford Focus MK2 RS 2.5L/ Volvo 5cyl - B5254T - Intake valve 32 (+1) x 5.96 x 104.3mm / Triple Groove MK6H/ SS EV8/ Black nitrided.
- Ford Focus MK2 RS 2.5L/ Volvo 5cyl - B5254T - Intake valve 32 (+1) x 5.96 x 104.3mm / Triple Groove MK6H/ SS EV8/ Black nitrided.(SET OF 10)
- Ford Focus MK2 RS 2.5L/ Volvo 5cyl - B5254T -Exhaust valve 27 x 5.95 x 103.3mm / Triple Groove MK6H/ Inconel
- Ford Focus MK2 RS 2.5L/ Volvo 5cyl - B5254T -Exhaust valve 27 x 5.95 x 103.3mm / Triple Groove MK6H/ Inconel (SET OF10)
- Ford Mazda Duratec Single Valve Spring Beehive KTM250-DU1 Ret-BM5-RR -Seat-SS-3030 - Seat preassure 49lbs @ 35mm install - Spring coil bind 20.3mm
- Ford Mazda Duratec Single Valve Spring Beehive KTM250-DU2 Ret-BM5-RR -Seat-VR624 - Seat preassure 60lbs @ 34.1mm install - Spring coil bind 20.3mm
- Ford Modular 4.6L 3v - Beehive Single spring OD 1.102"/.957"- 78lbs@1.535"/ Rate 322lbs/in- CB: .897"- Ovate wire. Max Lift: .550"/ / Use with OEM retainer / SEAT-M65BE-2
- Ford Modular 4.6L Beehive Single spring OD 1.102"/.957"- 87lbs@1.468"/ Rate 325lbs/in- CB: .897"- Ovate wire.
- Ford RS 2.5/ Volvo 5cyl Beehive Single Valve Spring Kit: 80 lbs@ 33.50 mm CB: 21.50mm, Rate: 10.50lbs/mm, Max Net Lift 11.70mm : SPR-TS1012-BE (20) + RET-TS5.5/T1F-BE (20)
- Ford RS 2.5/ Volvo 5cyl Beehive Single Valve Spring Kit: 85 lbs@ 33.50 mm CB: 21.50mm, Rate: 12.70lbs/mm, Max Net Lift 11.70mm : SPR-TS1015-BE (20) + RET-TS5.5/T1F-BE (20)
- Ford Zetec 85.50(+0.7)mm/ 4032/ Forged piston/1.161" Comp. height/ -9 cc Dish /20mm pin/ Rings 1, 1.2, 2.8mm/CR 8.7:1 (SET OF 4)
- Forged piston/ 1.181" Comp. height/- 3.3 cc Flat Top/19mm pin/ Rings 1, 1.2, 2.8mm...(CR 10.8:1) (SET OF 4)
- GM Ecotec Integral 6mm Intake & Exhaust Valve stem seal / Viton
- GM Ecotec 2.0/2.2 lts Exhaust valve /30.10x5.95x101.10mm/Stk size/ Single groove/ INCONEL
- GM LS 8mm valve stem seal- Guide OD 12.4-12.7mm / Width 15.2mm / Height: 14.3mm( SET OF 16)..
- High boost cooper ring gasket BMW M52/M54B25-30 - Diam 86mm for bore 84.5mm to 85.5mm / 1.50mm thick
- High boost cooper ring gasket BMW M52/M54B25-30 - Diam 87.60mm for bore 85.5mm to 87mm / 1.50mm thick
- High Boost Cooper Ring Gasket Ford Ecoboost 2.0L - Diam 89mm for bore 87.5 to 88mm / 1mm thick
- High Boost Cooper ring Gasket Ford Ecoboost 2.3L (YVDA - RS & Mustang 2019) - Diam 90mm for bore 87.5 to 88.5mm / 1.3mm thick (+0.6). Focus RS '15-'19- Mustang '19-Up
- High Boost Cooper Ring Gasket Subaru EJ25- 2007 and up / 101.3mm for bore 99.50 to 100.8mm/ 1.2mm (0.047") thick - One Side (any side).
- High boost cooper ring gasket Vauxhall/Opel C20XE - Diam 88mm / 1.6mm thick
- High boost Cooper ring Head Gasket BMW M50/52 86'-91' - Diam 84.5mm for Bore 84mm / 2.0mm thick (+0.2mm)
- High boost Cooper ring Head Gasket BMW M50/52 B25 - Diam 85.5mm for Bore 84-85mm / 2.0mm thick (+0.2mm)
- High boost Cooper ring style Head Gasket BMW S50 B30-B32 - Diam 87.1mm for Bore 86mm to 86.5mm / 1.8mm thick.
- Honda K20 Intake Valve 38 (+3) x5.48x106.95mm/TITANIUM/ Dish..Need to be used with 1.9-2mm Lash Cap and special Spring kit.
- Honda K20 Intake Valve 38 (+3) x5.48x106.95mm/TITANIUM/ Dish..Need to be used with 1.9-2mm Lash Cap and special Spring kit. ( SET OF 8 )
- Honda 81.02mm/ 4032 BOX Forging /1.181" Comp. height/- 2.5cc dish/21mm pin/ Rings 1, 1.2, 2.8mm...(CR 9:1 w/ B16). (SET OF 4)
- Honda 81.02mm/ 4032/ Forged piston/1.181" Comp. height/- 2.5cc Flat Top/21mm pin/ Rings 1, 1.2, 2.8mm...(CR 9:1 w/ B16). (SET 0F 4)..
- Honda 82.00mm/ 4032/ Forged piston/1.181" Comp. height/ - 2.5cc Flat Top/21mm pin/ Rings 1, 1.2, 2.8mm...CR 9:1 w/ B16- 10.1:1 w/B18C1.(SET OF 4)
- Honda 84.00mm/ 4032/ Forged piston/1.181" Comp. height/ - 10.3 cc Dome/21mm pin/ Rings 1, 1.2, 2.8mm.
- Honda 84.00mm/ 4032/ Forged piston/1.181" Comp. height/+ 1.4cc Dome/21mm pin/ Rings 1, 1.2, 2.8mm...(CR 11.5:1 w/B20- B16)( SET OF 4)
- Honda 84.00mm/ 4032/ Forged piston/1.181" Comp. height/+5.5cc Dome/21mm pin/ Rings 1, 1.2, 2.8mm...(CR 12.5:1 w/B20- B16) (SET OF 4)
- Honda 84.50mm/ 4032/ Forged piston/1.181" Comp. height/ - 10.3 cc Dome/21mm pin/ Rings 1, 1.2, 2.8mm. Tool Steel Wrist pin
- Honda 85.00mm/ 4032/ Forged piston/1.181" Comp. height/ + 8 cc Dome/21mm pin/ Rings 1, 1.2, 2.8mm...(CR 13.50:1 w/B20- B16) (SET OF 4)
- Honda B-Seriers Dual Valve Spring Kit: 85 lbs @ 33.5mm / 190lbs @12mm lift / SPR-H100DR (16) + RET-K20A2/T2(16)
