Shop Hours: Monday-Thursday. 9:30am - 4:30pm Pacific Time Closed for Lunch from 1:00-2:00 PHONE HOURS: 10:00am - 3:00pm Pacific Time Monday - Friday ------------------------------------------------------ email us at [email protected] Call us at 1 818 764-1901
To all our Website visitors: We are in the middle of a huge site overhaul and on occasion the site will be become slow or glitch...If this happens while you are looking around or shopping Please Call Us or Send us an email [email protected] and we will help you with whatever you need...
We are one of the oldest and most experienced "L" series engine builders in the World. We have bben building and Racing "L" powered cars since the 70's. We can build you an engine for any type of Street or Track use. From 200 HP Street builds to 700+HP Tubo monsters and everything in between.
Use the arrows to Click through the slide shows below for lots of pics of some of our recent engine building projects.
All Out L28 Big Bore Long Rod Triple DCOE Build
Datsun L20B Turbo Build
Datsun 280Z Big Bore Long Rod Street engine project.
89mm Set is no problem...That is a Wiseco Catalog part.. 89.5 is Not a Catalog part and has to be done as a Custom Set. 89mm is $759 Per Set as previously quoted 89.5mm is $795 per Set as a Custom part.
> Large Tube 1.625" Race Header for High Compression 3.0+ $399
> 1. A set of DOMED JE pistons 88mmwith coating skirt and valve pockets. $1050 + $138 Skirt Coat depending on Dome, Dish, Flat, etc. That is a set of 6 Forged JE Pistons with Pins, Locs and JE Pro-Seal Rings.
> 2. A set of Conrod for using with LD28 crankshaft. No problem 133mm H-Beam Rods with ARP2000 Bolts $650
> 3. A set of racing valve largest possible 46mm inlet or larger. ! 46mm Intake and 38mm Exhaust $250 Set of 12
> 4. A set of valve spring with Matching Moly Steel Retainers. No Titanium $ 215 for the full set...
> 5. A set of valve guide ,silicone bronze if possible. $9.50 each = $114 ---------- $2816 $345 ---------- $3161 US
