Domestic Shipping: Calculated after checkout based on your location.
International Shipping: Calculated after checkout based on your location.
Product Description
Details
Performance/Race. These injectors will fit in place of your stock injectors on the M20 and M30 engines. These are NEW injectors that have been independently flow/leak tested before being placed into matching sets of six. They feature updated 4-pintle nozzles for a more even spray pattern over early/stock single-pintle injectors. These injectors are designed for use with HIGH-IMPEDENCE Injection systems and may not be used on early low-impedance injection systems. When running new injectors you will need to reuse the stock retainer clips. Flow Rate: 20lb/hr @ 3Bar (43.51psi) Use: These can be used on upgraded M20 325i engines (with a proper tune) and stock M30 535i/635csi engines. Proper use is determined by the installer. Do not run on an otherwise stock M20b25 engine.
Additional Information
Additional Information
| Alert Text | N/A |
|---|---|
| Weight | 0.0000 |
| Width | N/A |
| Height | N/A |
| Depth | N/A |
| Length | N/A |
| Automotive type | N/A |
| Part Type | Intake/Carbs/Fuel |