Domestic Shipping: Calculated after checkout based on your location.
International Shipping: Calculated after checkout based on your location.
Product Description
Details
performance/race. If you are designing a custom fuel injection system for your stroker, swap, or turbo project and need to include a high-quality Fuel Pressure Regulator, this is it. This Nuke regulator is imported from Sweden and is made out of 6082. It includes a stainless universal mounting bracket with hardware. Yes this regulator is not cheap, but neither is a blown engine from using a regulator of dubious quality. Installation note: Please understand this is not a simple stock-replacement rail-mounted regulator; only use this regulator if needed. If you are looking for a regulator for use with your stock rail and factory 8mm(5/16?) hose, see our other regulator option. Tech: - 1:1 rising rate fuel pressure (adjustable from 35psi to 90psi [NOT for use with carburetors]). - The Fluoro-Nitrile diaphragm is methanol and ethanol friendly. - The included 6AN Fittings (with Nitrile o-rings) supports up to roughly 500hp (larger fittings for higher-outputs available by request). With the correct fittings, this regulator will handle around 1000hp.
Additional Information
Additional Information
| Alert Text | N/A |
|---|---|
| Weight | 0.0000 |
| Width | N/A |
| Height | N/A |
| Depth | N/A |
| Length | N/A |
| Automotive type | N/A |
| Part Type | Intake/Carbs/Fuel |