 |
About
Top-End Performance and this Website Current Sales Specials Always check this page out. It has our current specials deals on our most popular parts. |
| (818)764-1901.........(818)764-0155
fax.........e-mail:
topend@racetep.com Monday through Friday 8:00am - 5:00pm Pacific Time 7452 Varna Ave. North Hollywood CA 91605 |
|
 Secure
Server Online Ordering |
International Sales Specialists. We ship anywhere in the world |
Starion
Conquest Aluminum Radiator
Another Top-End Performance EXCLUSIVE product
Plate and Bar style Aluminum Radiator for all Intercooler Starions and Conquests.
Accepts original Cooling fans and bolts into stock locations. No modifications needed...
Accepts Original Hoses and Fan Switches
AWESOME cooling. Stress Tested in the Southern California Heat with AC...
As Beautiful as it is Functional. Can easily be polished
$525.00
Including FREE Ground shipping in the Lower 48 States. Order
Now
We can ship this Radiator anywhere in the world. Contact
us for International, Hawaii or Alaska Rates.
Add a Fan Relay kit for $45.00 When ordering the Radiator
Starion / Conquest Aluminum Radiator Installation Instructions:
Before installing in the car please
make sure to install the drain plug and swap the temperature switches from
the old radiator to the new one. They
use a rubber O ring to seal so make sure the rubber is intact and not dry,
if it is replace them. Install the fans before putting the radiator into
the car…see below if you have a problem mounting the fans on the aluminum
radiator.
This is a very straight forward, bolt in performance radiator. We find
it is very helpful to remove the battery and air intake canister; they do not
look like they are in the way, but having the extra room makes it a much easier
and in the long run a faster job. There is also an intercooler pipe running
through the core support on the passenger side that makes it difficult to access
the radiator mounting bolts; unbolt this pipe and loosen the hose clamp enough
to rotate it out of the way while working on the radiator.
**NOTES ABOUT FITMENT ISSUES**
Due to variances in the Mitsubishi fan shrouds it is sometimes necessary to perform some light fitment work to attach the fan shrouds to the radiator. Typically we find that the driver’s side fan is sometimes tweaked ¼” to ½” away from the mounting holes, due to manufacturing inconsistencies and warpage over time. The fan shroud brackets are usually pliable enough to tweak into place by installing two bolts on one side and bending or pushing the shroud brackets to line up with the other holes. On certain we find it is sometimes necessary to enlarge the fan mounting holes. If the fan is off by an extreme amount from an accident or a bad used part, you can usually work them back into position by bending the bracket until the holes line up and then carefully clamping the fan in place on the radiator as each bolt is installed.
From time to time we have seen these cars, both Starions and Conquests, with the radiator mounting holes ¼” shorter than the brackets on the radiator. If this is the case on your car the holes on the radiator brackets need to be enlarged to match the core support.