Back to Monter- Raider.com Main Page
We have added this payment option due to popular demand....After you decide what you need and get a total you can contact us for your shipping charges then pay via PayPal if you choose...You can of course use our usual secure server online ordering or just call us with a Visa, Mastercard, or Am-Ex

www.Montero-Raider.com... 818 764-1901 - 818 764-0155 fax - email: topend@racetep.com
Performance Engine, Components, and Turbo Systems for 2.6 powered Montero, Raider, and D50 trucks..


Montero - Raider 2.6 Turbo Conversion Kits.

Basic Kit Stage-2 Kit Stage-3 Kit
Turbo Clutch Kit  Internal Engine Upgrade Kit Turbo Engine Rebuild Kit
Exhaust Components Misc:  

We have finished the development on this kit and have been driving our Montero in the many different forms for almost 6 months. It works great and delivers outstanding and reliable performance. We are taking orders for the kits and they are being built on a per order basis at this time. 3-4 week build time once you place the order. It may actually be quicker but due to the backlog we have already that is a realistic time frame. 50% deposit when ordering and the balance due when it ships.

We are also developing a Fuel Injection System (Not a transplanted Starion system.) with programmable management and a single throttle body. This will be available next year.

 



 




The Basic kit: 160 HP at 3800 RPM and 170 Ft lbs Torque.

It is designed for Stock engines and Includes.
New 14G Turbocharger set at 6 psi boost.
New Exhaust Manifold
2.5" Downpipe with mating flange to be adapted to your existing exhaust system.
       We Recommend running a 2.5" Exhaust system with a High Flow Catalytic Converter and Free Flow muffler        for maximum performance. If you are in an area that does not require Smog Inspections then do not run a        Catalyst and there is a 8-10 HP increase from a straight through 2.5" system.
Inlet Pipe from Turbo to Carb top
Blow Through Carb top bonnett.
Specially modified Weber 38 DGES Conversion kit with adapter and linkage
Turbo Fuel Pump
Turbo Pressure Regulator
K&N Air Filter and Inlet pipe
TurboXS Type-S Blow Off Valve
$2750.00 Order Now

 

 



Stage 2 Kit: 190 HP and 180 Ft lbs Torque.
It is designed for Stock engines.
Everything above but Includes
Different Carb jetting and a Wastegate set at 8 psi
Turbo Water Injection kit
TEP Turbo Camshaft Upgrade
Ignition Upgrade for increased Spark Output (MSD 6A, 8mm Wire Set, Bosch Red Coil and NGK Plugs.)
$3295.00 Order Now

 

 



Stage-3 Kit: 220 HP and 200 Ft lbs Torque.
Designed for Modified Engines. Forged Pistons, ARP Head Studs, Metal Head Gasket, Non-Jet Valve Head.

Everything in the Basic Kit but includes:
Boost Controller to raise boost to 10-12 PSI
Different Carb jetting
Spearco Intercooler system
$3995.00 Order Now

 

 


TEP Montero Turbo Clutch Assembly:
This clutch will allow you to use the Stock 225mm Flywheel and have enough clamping force to hold 250+ HP and turn large Off-Raod tires with no slipping. Easy driving street use.
Complete Turbo Clutch Kit (This is not just a Starion Clutch. We have this Pressure Plate made for us for this application.) New TEP Pressure Plate, Disc, Release Bearing and Pilot Bearing.
$375.00 Order Now

 

 



Stage-3 Internal Engine Upgrade Package:
JE Forged Pistons (Standard Bore 8.8:1)
ARP Head Stud Set
TEP Steel Shim Head Gasket
Screw In Jet Valve Eliminators
Rod Bearing Set
Gaskets for Oil Pan, Valve Cover, and Manifolds
$865.00 Order Now

 

 

 

Montero Turbo Deluxe Engine Rebuild Kit:
If you are going to be rebuilding it and addding the Turbo you may as well do it right...This will get you the maximum power with all stages of the Turbo kit and allow you upgrade as you go along.
JE Forged Pistons (Standard Bore 8.8:1)
ARP Head Stud Set
TEP Steel Shim Head Gasket
Clevite77 Rod and Main Bearing Bearing Set
Balance Shaft Eliminator Kit and Timing Component Set
Full Gasket and Seal kit
NEW TEP Non-Jet Valve Head Casting
Stainless Steel Valve Set and Heavy Duty Valve Springs
$1750.00
Order Now

 


2.5" High Flow Catalytic Converter $89.00  Order Now
2.5" High Flow Rear Muffler and Chrome Tip  $149.00  Order Now
Camshaft upgrade only $199.00  Order Now

 



If you already have a Weber 38 DGES carb and want to use it on this kit you can send the carb to us for modification and Re-Jetting. Deduct $300.00 From the kit if you are using your old carb. If the carb needs to be Rebuilt at the same time as it is being modified then just deduct $150.00 from the kit price and we will Rebuild your carb and modify and Re-Jet it for use with the Turbo Kit.


We have added this payment option due to popular demand....After you decide what you need and get a total you can contact us for your shipping charges then pay via PayPal if you choose...You can of course use our usual secure server online ordering or just call us with a Visa, Mastercard, or Am-Ex


Top-End Performance
7452 Varna Ave
N.Hollywood CA 91605
(818)764-1901   (818)764-0155 fax
e-mail: topend@racetep.com
Place an Order
To Top-End Performance Main Page