Offset Front Control Arm Bushings - Delrin - E30/E36/Z3

performance/race. Our Delrin offset front control arm bushings fit the E30 325, M3 and E36 chassis. These bushings have the hole off-center to give your car a little more caster, and camber. The offset style bushing came standard on E30 M3s and the 1995 E36 M3, but will work with any E30, E36, or Z3. These are very stiff and take out the slop afforded by the stock rubber bushing. These bushing are intended for track cars. Sold by the pair. Made here in Southern California. Be sure to check race class rules for legality. Important fitment issue: Some new control arms from BMW, Lemfoerder, and others have had their rear bushing dowel machined to the WRONG SIZE (this is the part that slides into the control arm bushing). As per the original arms and Febi replacement control arms, the outside diameter of the dowel needs to be at least .89". If the diameter is any less, solid control arm bushings like ours (and others made from aluminum, umhw, etc.) will not fit properly (they will be sloppy).