IE Adjustable Camber (fixed Caster) Plates for Racing - E12
Click here if you Need Help or have a question about this product
E12 Suspension + Steering
race. Adjustable camber plates are essential for track and race cars. Our camber plates mount to the body from underneath the fender using the original factory mounting holes (none of our camber plates require any modification to the body). These are designed for use with 2.5" ID springs and coilovers and incorporate a 2.5" upper spring perch containing thrust bearings. Using these you can dial in 3+ degrees negative camber. Kit includes slotted mounting plates, sliding plates with steel spherical bearings and 2.5" ID upper spring perches with needle thrust bearings. Plates are machined from billet 6061T6 aluminum. Note: Racers will probably want even more than 3 degrees negative camber (we usually bend the strut housings 1 to 1.5 degrees for racing). Note 2: These plates also are machined with a set amount of caster (any more and you would start to sacrifice camber adjustability).
| Part Type | Suspension + Steering |
|---|
Write Your Own Review
Have a question about this part, or need help choosing? Ask us and we will reply by e-mail.