Engine Performance Components and rebuild packages

Engine Performance Components and rebuild packages

Block Assembly components:

Fortunately you are starting off with a very strong assembly. Other then raising the compression all this work is for reliability and high rpm smoothness. As with the head section the items marked with an * are what we recommend for a performance buildup that can withstand 400hp reliably for drag racing. Endurance road race application with Rpm s over 7500 for any length of time require a different approach. If this is what you are doing with your car call us for details.

Lightweight but extremely strong low expansion forged pistons in any oversize or compression ratio. We use 8.0:1 +.040 overbore in all our engines unless someone wants a big bore or a stock compression engine. Complete with lightweight wrist pins and pin fit for floaters. Con rod small ends should be bushed for floater style wrist pins.

JE Piston Set and JE Ring Combo (.040 ove 8.2:1)  $745 ORDER NOW
Any other bore size or compression ratio  $745.00 ORDER NOW

Lightweight but extremely strong low expansion forged pistons in any oversize or compression ratio. We use 8.2:1 +.040 overbore in all our engines unless someone wants a big bore or a stock compression engine. Complete with lightweight wrist pins and pin fit for floaters. Con rod small ends should be bushed for floater style wrist pins.

Total -Seal Gapless Top Piston Ring Add On $156  ORDER NOW

The only real choice in piston rings. They cost a bit more but they work a lot better.

Hastings piston rings   $89.00 ORDER NOW

The best stock replacement rings available

High heat coating on piston tops and Moly coating on skirts $45.00 ea ORDER NOW

Hypereutectic replacement pistons.. Only available in stock compression ratio  $59.00 ea ORDER NOW

Std bore, .020,.030,.040 overbore available.

Hypereutectic package with Total-Seal rings $399.00 ORDER NOW

Hypereutectic package with Hastings rings  $275.00 ORDER NOW

Race prepped connecting rods $375.00 set  ORDER NOW

The stock rod is strong enough for almost any use once it is prepared. Shot peened, beam polished, resized big ends, small ends bushed for floaters, New rod bolts, magnafluxed, balanced.

Crankshaft index ground, micropolished and oil holes chamfered $150.00  ORDER NOW

Crankshaft Nitride hardened    $180.00  ORDER NOW

Crankshaft Race Prepped $395.00  ORDER NOW

Index ground, Oil holes enlarged and chamfered, Weights detailed and de-flashed

Straightened and Nitride hardened, Micropolished

Block Work:

Hot tank, Magnaflux, bore, hone (with torque plate.) and deck $275.00  ORDER NOW

Balance shaft eliminator kit $69.00  ORDER NOW

Higher oil pressure, less parasitic drag, less timing stuff to buy

Timing chain kit for use with eliminator

Heavy-Duty Timing chain, tensioner, rails, crank and cam gears      $98.00  ORDER NOW

Balance shaft eliminator kit and timing kit combo      $150.00  ORDER NOW

Complete timing kit for engines with balance shafts      $169.00  ORDER NOW

Everything Chains, Guides, Tensioners, rails, gears, 100% complete

Electronically balance complete assembly from front pulley to clutch cover          $160.00  ORDER NOW

NEW Aluminum oil pump $229.00  ORDER NOW

Clevite 77 Rod and Main bearing sets ( Std, .010, .020 )      $109.00  ORDER NOW

Clevite77 Rod Bearings $45.00  ORDER NOW

Clevite77 Main bearings $69.00  ORDER NOW

Complete gasket set with all seals and washers    $139.00  ORDER NOW

Lower end gasket set only $45.00  ORDER NOW

TEP Performance camshaft for Carb and mechanical adjusters   $199.00 ORDER NOW