Back to Main Page
|Monday through Friday 8:30am - 5:00pm Pacific Time.||About Top-End Performance and this Website|
|7452 Varna Ave. North Hollywood CA 91605||Ordering and Return Policies||News and Vacation Schedule|
Secure Server Online Ordering
Sales and Export Specialists.
We sell and ship parts and accessories anywhere in the world. See our Export Page for details.
Performance Catalog Descriptive Price List.
Prices and availability have been changing at a pace we simply cannot keep up with these days..
PLEASE check with us before ordering to make sure the pieces you want are still available and the current cost...
Phone (818) 764-1901 or (818) 764-6768
Fax (818) 764-0155 24 hrs.
Methods of Payment
American Express ( We can only ship to the billing address. No Exceptions ! $50.00 minimum )
Cashiers Checks, Money Orders
Personal Checks ( Allow min. 5-10 days to clear )
We Ship Via:
UPS for all Domestic Shipments.
See this Page for Export Shipment information: http://www.racetep.com/tepexport.html
Please use this for reference and contact us for current pricing before
ordering....Many of parts are still priced correctly
but currency fluctuations, etc. have caused many of these to change...
This is our complete parts listing and price list. It should be fairly comprehensive although I m sure I forgot at least a few things. If you don t see it on this list call and ask. These should be the definitive prices at the time of printing but always ask when placing an order. Some stuff is beyond our control and the prices can change.
Engine Parts and Components:
Cylinder Heads and Components:
Rebuilt Cylinder Heads (Using your core)
All our heads are rebuilt the same way. 100% complete. Heads are disassembled, Bead Blasted and Pressure tested. Cracked heads can be repaired but it is usually cheaper and easier to use a different casting. All New valve guides (All M10 heads get late style E21 guides that use the good small seals..) Are installed. Seats and valves are replaced as needed. 3 angle valve job with hand lap and back-cut. Surfaced top and bottom with the upper front cover to insure a leak free installation . All new Rocker Arms, Rocker shafts and Dual valve springs. Reground cam with your choice of 282, 288, 294, or stock camshafts. Assembled with Viton valve stem seals. Includes the complete head gasket set.
M10 $995.00 using your core head and camshaft.
Big 6 $1295.00
Max 7 day in shop time.
Add a full set of Stainless Steel Performance valves for
4 cyl $120.00 when having the head rebuilt .
6 cyl $175.00
when having the head rebuilt .
$400 4 cyl 8V
$525 6 cyl 12V
$595 4 cyl 16V
$895 6 cyl 24V
Add $19 each for Titanium Valve Retainers for M10 and M30
Yes we can supply cores and sell heads on an outright basis if your core is junk. Core head price varies with current supply. It averages $250.00 for a 121, E12, E21, or 1.8i head. If we are building the engine we always prefer using the E12 or 1.8i head castings .
All our cams are available either as re-ground on stock cores or as NEW Billets. The 302, 316 and 328 require the use of lash caps. All cams are re-hardened and will have the same if not better life than the original unit. All reground cams are sold on an exchange basis with a $100.00 core charge if we happen to have a core available in stock. We can also grind your core. Turnaround time on cam grinding is 3-4 days. We have more grinds than just what are listed here. We have all the Euro cam masters as well as a variety of other upgrade cams that we can do.
All Performance Re-Grinds:
4 Cylinder $149.00 Small 6 $189.00 Big 6 $199.00
All NEW Performance Grinds:
$369.00 Small 6 $425 Big 6 $459
Stealth Cheater Grind for IT Racing. Stock Lift. 286 duration. Works good with stock springs. A very good
chance the guy next to you on the pre-grid is using one ..
274 Baby 6 with K-Jetronic and Motronic Injection. 325I and 323I
278 Very mild street upgrade for stock engines
284 Tii and 320i with C.I.S. Injection. Also 318I with L Jetronic
288 All around great street cam for 2 bbl or sidedrafts. Our #1 choice
294 Okay for big 2 bbl or Sidedrafts. 9.6:1 or higher
300 Sidedrafts only. 10.0:1 up. 3800 - 7500
302 Sidedrafts only. 10.5:1 up. 4000 - 7800
316 Sidedrafts only. Road Race Only 11.5:1 up. 4500 - 8000
328 Sidedrafts only. Road Race Only 12:1 up 5000 - 9000
Lash Caps for cam adjusters 5.00 ea.
Performance Valve Train Kits:
This is a complete set of (4) Stainless Steel 46mm intake and (4) 38mm Exhaust valves and Dual Performance Street Valve spring set
4 cylinder 223.00
6 cylinder 351.00
4 Cylinder $155
6 Cylinder $228
Cylinder Head Components
Head Studs. The last word in strength.
For High Compression or Turbo Engines.
4 cylinder 139.00
6 cylinder 210.00
Heavy Duty Head Bolt Set. 15% stronger than stock bolts 79.00 set
Stock Replacement Head Bolts 45.00 set
Big Bore Head Gaskets for up to 91mm Bore 45.00
Heavy Duty Dual Street Valve Springs 89.00 set
Race Valve Springs 119.00 set
Rocker Shafts 29.00 ea.
Rocker Arms 13.95 ea.
Eccentric Adjusters 2.50 ea
Manifold Studs 3.00 ea.
Valve Cover Studs 2.00 ea.
German Head Gasket Set 79.00
Valve Cover Gasket 6.95
Rear Distributor Housing Gaskets 3.50
O-Ring Washer For Rear Housing 1.80
Upper Timing Cover Gaskets 5.00 pr.
Distributor O-Ring 1.50
Valve Stem Seals
2002 Big Style 1.20 ea.
320I Small Viton Seals 2.50 ea.
Stock Exhaust Valve 38mm 25.00 ea.
Stock Intake Valve 46mm 19.00 ea.
Stainless Steel Intake or Exhaust Valves 38mm and 46mm 18.00 ea
High heat coating on valves 12.00 ea
Lash Caps for big cams 5.00 ea
Custom Size Stainless Steel Valves made to order 36.00 ea.
Machined from blanks Any head size or length you want Requires use of Lash Caps which are included in price of valves
Head Machining Services:
R&R Valve train
Remove and install Rockers, Shafts, Cam, Valves and Springs 50.00
3 Angle Valve Job 120.00
Includes clean and blast
Hand Lap and Back-Cut (12) 32.00
Surface head top and bottom 60.00
Install Valve Guides ( Includes guide ) 10.95 ea
Install new seats (Includes Seat ) 24.00 ea
Crack Repair call
Match port head and manifold only 120.00
Match port carbs to manifold ( Dual Carbs ) 150.00
Components and Engine Rebuild Kits:
Forged Piston Sets 4 cylinder 650.00 set
6 cylinder 945.00 set
JE Forged Pistons. Low expansion. Tighter piston to wall clearance than any other forged pistons. Very quiet cold operation. Exceptionally good replacements for the terrible factory E30 M3 pistons. Sets of 4 or 6 Any size and any compression ratio. These piston sets are made to order and are available for all engines. We can do any dome or dish configuration for Normally aspirated ,Turbo, or Nitrous applications. Drag Race, Road race, or Performance Street engines. 4-5 week order time on all sets. All forged piston sets come with tool steel wrist pins and pin locks. All our Forged piston sets come complete with Total-Seal Gapless Rings.
Factory Piston Sets Call
Call for availability and pricing
High Heat coating on piston tops and skirts 49.00 ea
Hastings piston Rings 89.00
Good replacement ring for a stock engine on a budget.
Total-Seal piston Rings 4 cylinder 145.00
6 cylinder 229.00
Simply the best. Whether it is a stock engine or a full race engine these rings will enhance the performance and life of your engine.
Oil Cooler Kits.
Earls Oil Cooler, Adapter, Steel Braided Lines and Fittings 399.00
Race Prepared Connecting Rod Sets 375.00 set
Shot Peened, Lightened, Polished, Magnafluxed, Re-Sized, Re-Bushed, New Bolts
Must have your rod cores to do.
Race Prepped Cranks 395.00
Shot Peened, Detailed, Oil Holes Enlarged, Index Ground, Heat Treated
Must have your crankshaft to do.
German Lower End gasket set 45.00
Timing Cover Gasket Set ( Lower Only ) 19.00
Timing chain (No master link) 59
Oil Pump Chain 11.95
Oil Pump Call or email for current price and availability
Available for 2002 or 320i pan. Comes with Gear, Nut, and Washer
Tensioner Rail 21.00
Guide Rail 16.00
Tensioner Piston and Spring 12.00
Tensioner spring cap 5.00
Mechanical Tensioner 75.00
KS Rod Bearings $55
Std. .25, .50
KS Main Bearings $89.00
Std. .25. .50
Oil Pan Baffle. Drop in and weld 2002 50.00
Wrist Pin Bushings 28.00 set
Rod bolts and nuts 4 cylinder 59.00 set
6 cylinder 88.00 set
Single Groove Crank Pulley 189.00
Engine Rebuild Kits:
4 cylinder M10 SHORT BLOCK Performance Engine Rebuild kit: (2002,320i, 318i)
JE Forged pistons (Any bore size or compression ratio)with JE Pro-Seal Rings
German Rod and Main bearings (std, 10, 20)
Full engine gasket set
Timing chain, tensioner and guide rails
$1295 Order Now
4 cylinder M10 LONG BLOCK Performance Engine Rebuild kit: (2002,320i, 318i)
Performance Dual Valve Spring set
New Rocker arms and Rocker Shafts
New Heavy Duty Cylinder Head bolts
JE Forged pistons (Any bore size or compression ratio)with JE Pro Seal Rings
German Rod and Main bearings (std, 10, 20)
Full engine gasket set
Timing chain, tensioner and guide rails
$1825 Order Now
Pumps have been discontinued and are very difficult and expensive to
find....IF we have any available the average cost for the pumps will be
Add $129 For Rod bolts and Nut Set
Block and Rotating Assembly Machine Work:
Bore and Hone block
to .040 over 120.00
to .080 over 180.00
to .120 over 200.00
Hone block only 50.00
Re-size big ends of rods 15.00 ea
Re-bush small ends of rods 25.00 ea
Micropolish crank only 30.00
Grind crankshaft and micropolish 80.00
Heat treat crankshaft 150.00
Balance Rotating assembly 160.00
Crankshaft, Rods, Pistons, Front Pulley, Flywheel, Pressure plate.
Flywheel Lightening 150.00
Lighten, Surface, and Step your flywheel Excellent compromise in weight reduction and mass retention for street and race use .
Super Duty Cooling System Kit $339
New Aluminum radiator, Lower rad hose, 71 C degree thermostat
Radiator cap. Drain plug. Hose clamps.
Aluminum and Plastic Radiator Only for 2002 or 320I $289
Complete Hose Kit Call or email...Prices and availability are subjest to change...
10 hoses including heater and choke hoses.
We sell all the individual hoses as well. Call with whatever you need.
Low Temperature ( 71 C) Thermostat $29.95
German Water Pumps
Regular 69.00 Tii Call or email...Prices and availability are subjest to change..
German Alternator / Water Pump Belts 6.50
Heavy Duty Radiator Cap. Lever Vent Style 10.00
Standard Radiator cap 6.50
Radiator Drain Plug 4.50
Plastic cooling fan
Clutch / Flywheel / Driveline Components:
Lightened Stock Flywheels.
We Lighten, Surface, Step, and Zero Balance Your Flywheel 160.00
215mm Flywheels usually come out 10-11 lbs.
228mm Flywheels usually come out 15-16 lbs.
Occasionally we have cores and can sell a flywheel on an exchange basis. Call for availability. Otherwise it is a 3-4 day turnaround time once we receive yours.
Clutch Kits are
Pressure Plate, Clutch Disc, Release Bearing, Pilot Bearing.
215mm F&S German Stock replacement clutch Kit $269
228mm F&S German Stock replacement clutch Kit $319
Sport Kits have a 15% heavier Diaphragm Installed and use a Higher Heat Coefficient Disc Material
215mm Sport Street and Autocross Clutch Kit $299
228mm Sport Street and Autocross Clutch Kit $339
Race Clutch Kits:
Race Clutches have a 25% Heavier Diaphragm and use a Specially Treated Metallic Puck Clutch Disc
We Offer these In Sprung Hub for Extreme Duty Street Use and Solid Hub Lightweight for Race Track Only Applications
215mm Race Clutch sprung $359
215mm Race Clutch solid $379
228mm Race Clutch sprung $399
228mm Race Clutch solid $399
Misc. Shifter and Driveline Pieces:
Shifter Rebuild and Upgrade Kit: $199
Complete kit to rebuild and upgrade your 4 speed shifter to the late style linkage Includes the Lower shift lever and ball with Delrin bushing, The bushings between the upper and lower shifter levers, selector rod, cup bushings, knuckle between trans and selector rod, pin and clip for knuckle, retaining clips and bushings, Shift tower to tans mounts .In other words..Everything you need to make it feel better than new .
Add $20.00 to have it shortened for 5 speed conversion
Add $40.00 for Short Throw Shifter Conversion
Flywheel Bolts. Specify Length 22mm or 27mm 4.00 ea
Rear Main Seals 14.00
Rear Main Seal Gaskets 5.00
Heavy Duty Rear Trans Mount 22.00
Driveshaft and 5 speed components:
This is the best bolt-in 5 speed x-member made Comes with all hardware and the trans mount..Over 200 in use around the world
Shortened 5 speed conversion shifter housing 120.00
Guibo ( flex disc )
8 bolt standard 39.00
8 bolt Heavy duty 49.00
6 bolt standard 45.00
Center support assembly 39.00
Street Suspension kit: 1425.00
Front and Rear Bilstein HD Struts and Shocks.
H/D Street and Autocross Springs
Urethane Front Bushing Kit
22mm front and 19mm adjustable rear Sway Bar set with all bushings and hardware
Fixed Negative Camber Offset plates
Front and Rear Ultimate Brace Package
Race Suspension Kit: 1895.00
A full I.T. or Club Race suspension kit. Used by countless race winners and track record holders across the U.S.A.
Sway Bar Set
Bilstein Sport Struts and Shocks
Urethane front bushing kit
Urethane rear bushing kit
Solid rear subframe mounts
Front Coil-Over kit
Rear race coil springs
Front I.T. Legal strut tower brace
Front Single Tube Strut tower brace
Engine Torque brace for Single Tube Brace. 2002 or 320I 89.00
Replacement Mount for Engine Torque Brace 12.00
Engine Torque Brace Only for use with your existing Strut Brace 75.00
( Must be made to your strut brace )
Stand Alone Engine Torque Brace for use without Strut Tower Brace 105.00
All coil over conversions include
Adjustable camber plates, (Either the Racing plates or the K-MAC plates. Your choice.) Threaded collar adjusters, Mounting hardware Upper and Lower spring perches and 2.5 springs. Your choice of rate. 8 or 10 length.
E30 M3 525.00
Racing Adjustable camber plates 289.00 pr.
Same as used in coil over kit. Hard anodized aluminum. Spherical and flat steering bearings.
K-MAC Street Camber / Caster plates 299.00 pr.
2.5 upper spring perch.
Threaded collar adjusters with lower perch 109.00 pr
2.5 coil over springs 115.00 pr
Negative offset plates. 75.00 pair
degree Negative offset. Bolt in part
Urethane Front Bushing Kit 69.00
Control Arm Inner and Outer and Strut Rods at Core Support
Urethane Sway bar to Frame Bushings. Specify 19mm, 22mm, 25mm 19.00 pr
Specify Bar Diameter
Urethane Sway Bar End Links 21.00 pr
Complete With Bolts, Bushes, Washers
Urethane Sway Bar End Link Bushings ( 8 required per bar ) 2.00 ea.
New Front Control arms with rubber bushings installed 119.00 ea
320I Front Control Arms Include Ball Joints 89.00 ea
Lower Ball Joints 35.00 ea.
Tie Rod Assemblies. Complete Inner and outer tie rod ends and sleeves 49.00 ea.
Center Steering Link. (Drag Link) 69.00
H/D Idler Arm Bushings Pair. 45.00
Front End Steering Rebuild Kit: $289.00
This is all the pieces you need to get the front of your 2002 feeling like new.
(2) Steering rods
(2) Idler Arm bushings
(2) Ball joints
Sway Bar Set
22mm front and 19mm rear adjustable 325.00 pr
Front Bar Only 169.00
22mm Adjustable Front Bar 250.00
U Brackets for sway bar mounting 4.50 ea.
Bilstein Sport Strut Inserts
Standard Length Strut Tube 129.00 ea.
Shortened Strut Tube 139.00 ea.
Bilstein H/D Strut Inserts 109.00 ea.
Tokico Illumina 5 way adjustable Strut Inserts 139.00 ea.
Shortened Strut Tube or Adjustable Camber Plates Only
Tokico Non-Adjustable Strut Inserts 79.00 ea.
KYB Strut Inserts 59.00 ea.
Upper Strut bearings stock replacement 49.95 ea
Upper Strut Bearing Assemblies ( Heavy Duty Rubber ) 65.00ea. Upper Strut Bearings with Negative Offset Plates combo 185.00
Front H/D Motor Mounts ( Pairs Only ) 2002 56.00 pr
Front Stock Replacement Motor mounts 45.00 pr
Front Wheel Bearing Kits ( Both Sides Inner and Outer with Seals ) 49.00
Rear Shock Tower Brace and Battery Relocation Kit 199.00
Specify 2002 or 320i
Rear Shock Tower Brace and Battery Relocation Kit for Coupe 199.00
Optional Master Battery Cut Off Switch with Removable Key. 29.00
Rear brace less cable kit 180.00
Bilstein Sport Rear Shocks 89.00
Bilstein H/D Rear Shocks 85.00
Tokico Non-Adjustable Rear Shocks 59.00
KYB Gas Shocks 39.00
Coil-Over Conversion Kit
Complete kit with adjustable shocks, springs, height adjusters, mounting hardware. Pair.
E21 Rear coil over upgrade for Bilstein sports 280.00
Threaded collar adjusters, 2.5 coil springs, Upper perch adapters
19mm Rear Adjustable Bar Only 199.00 17mm
Urethane Sway bar to Frame Bushings for 19mm bar 19.00 pr
U Brackets for bar 4.50 ea.
Solid Rear Subframe Mounts. Pair
H/D Rubber Subframe Mounts. Pair
Boxed Rear Control Arms 200.00
This is per pair and must be done to your control arms.
Rear Axle Bearing Set. Inner and Outer and Seals 50.00 side
Brake System and Conversions:
Big Front Brake Kit for 2002 $695
Vented rotors, Rebuilt calipers, Hubs, Wheel Bearings, Wheel Studs, Metal Master pads, Dust caps, Spacers. 100% bolt-on for non-Tii calipers.
2002 Performance Braking Package: call
2002 Big Front Brake Kit with (2) new Rear Brake Drums, (1) set of 4 Rear Brake Shoes, Set of (4) Steel Braided Brake lines
Metal Master Brake Pads ( Front )
Stock Brakes 45.00
Tii Brakes or Early 5 series 49.00
320I 1977 49.00
320I 78 on 49.00
E30 M3 59.00
Big Front Brake Kit 49.00
R4 Carbon Kevlar Racing Brake Pads
Stock Brakes 129.00
Tii Brakes or Early 5 series 139.00
320I 1977-83 139.00
E30 M3 169.00
Big Front Brake Kit 149.00
Rear Brake Shoes
New H/D Shoes for
R4 Carbon Kevlar Racing Shoes
2002 or 320I 189.00
Brake Master Cylinder
Std 2002 139
4 Wheel Disc Conversion Master 159
16mm std 28.00 ea
17mm Tii 39.00
Rebuilt Brake Calipers
2002 std 89.00 ea
Tii 109.00 ea
E21 89.00 ea
E12 109.00 ea.
All rebuilt calipers are exchange and carry a $50.00 each core charge. All come with
Stock Brake pads installed
Rebuild kits for Calipers 24.00 ea
Steel Braided ( Stainless Steel )Brake Line Kit
Our Steel Braided lines are different than most of the lines that are sold today. Most places use the mass produced Crimp style lines. These are cheap to manufacture but also suffer from many leakage problems and generally have a short life. The other problem is that they can only be sold in sets which means if you have a problem with a line you cannot replace the line or the fitting but rather you will have to buy a complete new set. All our line feature replaceable lines and fittings.
4 Wheels. (8) Lines 109.00
Front Only (4) Lines 89.00
Clutch Slave Line 45.00
For standard or 5 speed conversions
Stock Rubber Brake Lines 14.00 ea.
Top-End Performance has a very strict Meet it or Beat It pricing policy on all Weber carbs and conversions. No one can beat our price for New Weber product..If for some reason you find a lower price ON THE SAME THING we will Meet or Beat it..We also offer FREE UPS GROUND shipping on all complete Weber conversion kits .To learn more about our Weber product line visit our Weber website at http://www.webercarbs.com
See our Weber Carb page for details and
See our Weber Carb page for details and current prices
Ignition and Electrical System:
Ultimate Spark Package
MSD-6A, MSD Tach Adapter, 8mm Wire set, Pertronix Ignition
NGK Spark Plugs, Bosch red coil $495
This package is the answer to all your ignition dreams Fast starts in all weather, great idle quality, much higher RPM potential, Better fuel economy, More spark so you can run more aggressive carb jetting for more power Nothing but positive benefits. Truly amazing on Tii's
Bosch Points 6.00
Bosch Condenser 10.50
Bosch Distributor Cap 12.00
Specify Year and Distributor
Bosch Ignition Rotor
Rev Limiting 39.00
TEP 8mm Plug Wire Set ( Short Coil Wire Only ) 39.00
NGK Spark Plugs. BP6ES or BP7ES 1.99 ea.
Bosch Spark Plugs W8DC or W7DC 1.79 ea.
No, we do not sell Bosch Platinum Plugs. They are terrible. Use NGK or Standard Bosch We also do not sell or want anything to do with Splitfires. They are useless.
Pertronix Electronic Ignition Unit 89.00
Crane Electronic Ignition Unit 109.00
Bosch Blue Coil 32.00
MSD 6A Unit 169.00
MSD Tach Adapter 45.00
65 amp Internal Regulator Alternator kit
End the Dim Dash light and headlight woes associated with all 2002 s .You can actually run Halogen headlights on high beam, your stereo, wipers, and heater blower motor all at the same time with no loss of power to anything .Truly a great conversion ..
Fuel Injection and D.I.S. Ignition:
320I stock fuel injectors 45.00 ea
320I high flow injectors ( +5% ) 55.00 ea
We also sell all the replacement F.I. components for all Bosch systems on 320i, E12, Etc.
Electromotive XDI D.I.S. Ignition system 1045.00
Bolt-on package with HPX unit. Trigger wheel. Magnetic Pickup. New single groove crank pulley with trigger wheel machined, indexed and installed. Bolt-on mag pickup brackets and plug Wires
Electromotive TEC-3 Management systems
Bar none the finest aftermarket management you can buy Even if you spend more you won t get as good a system .
Complete system. ECU, DFU, Harness, Sensor Package and Connectors, WinTEC Software and Programming cable. We have THE BEST PRICE in the US on NEW TEC-3 Systems. 2250.00
HALTECH F10, E6K Management systems
Complete systems. ECU, Narness, Sensors, Software, Etc.
F10x Fuel Injection Management Only 1095.00
E6x Fuel and Ignition management 1350
Halmeter AF/30 Air Fuel Ratio Monitor. Meter Only 129.00
3 Wire Heated 02 sensor for Meter 69.00
Meter and 02 Sensor kit with weld nut and cap. 189.00
02 boss weld nut only 5.00
02 boss cap 4.00
Bosch Fuel Injection Pump. For up to 350 HP applications 179.00
We are a Bosch Distributor and can supply you with anything you need for a factory F.I. system as well as all aftermarket components for doing F.I. Conversions
F.I. Conversion Packages:
We offer several different EFI conversions for the 2002 and 320I models as well as programmable management systems for all current EFI equipped cars. Multiple throttle bodies, single throttle body log manifolds, Normally aspirated, Turbo, Etc. Contact us for details specific to your needs. To give you an idea so that you can decide if it is an area you even want to pursue . A complete dual sidedraft throttle body conversion with EVERYTHING needed to do the conversion including management, software, hardware, pumps, regulators, Etc
Complete Packages start from $2200.00 and go up to $4300.00 depending on the Induction style and management system you choose .
1.5 14Ga. Header 195.00
1.625 14Ga Header 229.00
Any above with Oxygen Sensor Port Installed Add 20.00
Specify for 2002 , 320I, or 318I (E30)
Heat Shield Exhaust Manifold Gasket for Stock or Header 18.00
Exhaust Manifold Studs and Copper Nut $29 per set of 8 ea
Turbo Exhaust Manifold for Garrett T3 Turbo $695
We also supply a complete line of T3 and T3/T4 Hybrid turbochargers for any application. Please visit our website for complete turbo information
Downpipe for Turbo manifold with T3. Includes flex pipe. 250.00
Front Windshield 69.00
Rear Window 65.00
Chrome Inserts for Front or Rear 56.00 ea
Clip for Chrome Insert 3.00
Trunk Seal 49.00
Window Seals 69.00 ea
Door Seals 180.00 ea.
Sunroof Seal Set 39.00
Door Handle Seals 8.00 door
Wheel Emblems. Roundel Centers Specify Diameter 4.00 ea
© 2014-2015 Top-End Performance.
No Portion of this catalog may be reproduced, copied, or excerpted in any form without the express permission of Top-End Performance and Steve Nelson